Tilted Forum Project Discussion Community  

Go Back   Tilted Forum Project Discussion Community > The Academy > Tilted Knowledge and How-To


 
 
LinkBack Thread Tools
Old 08-14-2004, 08:28 PM   #1 (permalink)
lonely rolling star
 
sadistikdreams's Avatar
 
Location: Seattle.
How-To: Make a pipe...

Okay. I fucking hate headshops, and I have NO money.

I wanna make a nice little pipe, or bong, out of something that's common.

Thanks for the help.
__________________
"Besides the noble art of getting things done, there is the noble art of leaving things undone.
The wisdom of life consists in the elimination of non-essentials.
"
-Lin Yutang

hearts, by d.a.
sadistikdreams is offline  
Old 08-14-2004, 08:58 PM   #2 (permalink)
salmon?
 
Location: Outside Providence
well, do you have any parefenalia? If you do, you may be able to adapt the bowls to new pieces that seem new. Just bring a few bucks into the hardware store and you can get some good shit. But dont ever use copper, and aluminum is just nasty. Check the local discount stores, you can find vases that make grood bongs if you can dremel a hole in them for the stem.
__________________
"Lick my frozen metal ass!"

Last edited by theguyondacouch; 08-14-2004 at 09:01 PM..
theguyondacouch is offline  
Old 08-14-2004, 09:12 PM   #3 (permalink)
lonely rolling star
 
sadistikdreams's Avatar
 
Location: Seattle.
If I wanted to go out and buy more stuff, I would just buy a piece.

I mean like, everyday household items.

Damn, maybe I should've said that.
__________________
"Besides the noble art of getting things done, there is the noble art of leaving things undone.
The wisdom of life consists in the elimination of non-essentials.
"
-Lin Yutang

hearts, by d.a.
sadistikdreams is offline  
Old 08-14-2004, 09:29 PM   #4 (permalink)
salmon?
 
Location: Outside Providence
But do you currently have any pieces?
__________________
"Lick my frozen metal ass!"
theguyondacouch is offline  
Old 08-14-2004, 09:34 PM   #5 (permalink)
Like John Goodman, but not.
 
Journeyman's Avatar
 
Location: SFBA, California
Light bulb socket with plug and plastic covering around it, wooden bowl, light bulb, glass lamp chimney/cover/whatever you call it, rubber balloon, alluminum foil, and a bit of plastic bendable tubing (small, like an inch diameter).

Drill a hole in the wooden bowl big enough for the light socket, put the socket in the hole so that the bulb pokes out the bottom (so you can sit the bowl upside down and have the lightbulb pointing up), put the bulb in the socket, and form out of the alluminum foil a shape that fits over the light bulb and simultaneously forms a small bowl on top. Chop up any of your favorite *plants* and place the finest bits in the alluminum bowl. Then stick the lamp chimney on the bowl/surrounding the lightbulb setup (nice how it expands in the middle-bottom ). Then, take the balloon and cut a small, small hole in the top of hit, *and* cut the rim off the opening. Run the small plastic tubing through the little hole, then stick the newly limber original balloon opening snugly over the top of the lamp chimney. Put your thumb over the open end of the plastic tubing, plug in the light bulb, wait 60 seconds, or untill a fine mist (real fine, you'd be hard pressed to really notice it) starts to really be smoking off of the plant particles. Inhale untill it stops emitting the fine mist.

Shouldn't run you more than $20. Runs off of the principle of this: http://www.marijuanavaporizer.com/main.html

Edit: Oh, household items. An apple. Take the stem out, use a pencil to poke a hole from the stem to the middle-ish, them poke a hole from the side to the middle and through to the other side. Put the bowl in where the stem was, light it with your mouth on one side inhaling and your finger over the other, once it's burning nicely, take your finger off the other side. and keep inhaling.
Journeyman is offline  
Old 08-17-2004, 05:50 PM   #6 (permalink)
Human
 
SecretMethod70's Avatar
 
Administrator
Location: Chicago
Amazing the things you can do with everyday home items!
__________________
Le temps détruit tout

"Musicians are the carriers and communicators of spirit in the most immediate sense." - Kurt Elling
SecretMethod70 is offline  
Old 08-19-2004, 11:22 AM   #7 (permalink)
Tilted
 
Location: Miami, FL
Quote:
Originally Posted by sadistikdreams
Okay. I fucking hate headshops, and I have NO money.

I wanna make a nice little pipe, or bong, out of something that's common.

Thanks for the help.
Hey, you want cheap and SIMPLE? All you need is a beer can and a sharp instrument!!!!!
Finish your beer, dry out the can. Make a small dent in the bottom of the can (this will be the bowl)... which now becomes the TOP of the can. Just make it adequate enough so that the tobacco [that's what you're using, right?! ] doesn't slide off. Make a bunch of tiny holes with a knife in the dented in area. Make sure they are small enough so that your tobacco doesn't fall thru.. this is the screen. On the side of your can, make a carb hole... small enough that you can cover up with your thumb.

Lay down your smokes onto the screen. SPARK IT! Cover your carb hole. Suck on the part you drank your beer out of. When you inhale your smoke, let go of the carb hole, and finish the rest of your hit.

Pictorial for these instructions: http://www.smokingwithstyle.com/canpipe.htm
davidc209 is offline  
Old 08-19-2004, 11:31 AM   #8 (permalink)
Insane
 
Location: Toronto
I just made a vaporizer out of nothing but a night light bulb. First use a hacksaw to cut the very tip of the metal part off. Being VERY careful to not break the bulb use a screwdriver to take out all the glass and metal shit that makes the light. You should just have a glass bulb shaped dome with a hole in the top now. Take your very finely ground 'tobacco' and put a little bit in the bottom. With your thumb over the hole heat the tip of the bulb which should be pointed down. This is the tricky part which takes some practise but if you do it right the bulb with fill with vapour and not smoke. Don't heat the bulb constantly or too long or else it will break or the 'tobacco' will burn and start to smoke. Once the bulb is full up take your finger off the top and use a straw to suck out all the vapour. THere is very little smell because there's no smoke so you can do this pretty much anywhere and blame the little smell there is on bad beans or something. You should NOT have any smoke and it tastes kinda minty.
ickma is offline  
Old 08-19-2004, 01:17 PM   #9 (permalink)
is awesome!
 
Locobot's Avatar
 
Apples are easy and taste nice. I'm scared of inhaling that powdery stuff inside of most lightbulbs to use one of those, maybe a clear blub... If you have a bowl and a make shift stem, you can make a bong out of anything that will hold water. Gatorade bottles work well, or you could go with the classic honey bear. It's not rocket science.
Locobot is offline  
Old 08-19-2004, 01:31 PM   #10 (permalink)
Tilted Cat Head
 
Cynthetiq's Avatar
 
Administrator
Location: Manhattan, NY
in tropical climates....

need piece of foil and soda bottle.... find papaya tree. pull of leaf and stalk from tree. make cone out of foil, insert into large end of papaya stem. pack bowl. insert stem into bottle. cover opening with hand and inhale like playing flute. One can fill bottle with water... and in the dark... inhale snap the bowl hard to watch it glow thru the stem to clean out bowl.
__________________
I don't care if you are black, white, purple, green, Chinese, Japanese, Korean, hippie, cop, bum, admin, user, English, Irish, French, Catholic, Protestant, Jewish, Buddhist, Muslim, indian, cowboy, tall, short, fat, skinny, emo, punk, mod, rocker, straight, gay, lesbian, jock, nerd, geek, Democrat, Republican, Libertarian, Independent, driver, pedestrian, or bicyclist, either you're an asshole or you're not.
Cynthetiq is offline  
Old 08-19-2004, 07:57 PM   #11 (permalink)
MSD
The sky calls to us ...
 
MSD's Avatar
 
Super Moderator
Location: CT
Take a Frappucino Bottle, tap a hole in the cap off toward the edge, and put a piece of aluminum pipe in so it almosts touches the bottom. Tap another hole in on the other side, and put a piece of rubber tubing in so you have a foot or two outside of the bottle and an inch or two inside. Wrap enough duct tape around that it's airtight. Put a piece of screen patch (for window screens) over the pipe, push it down to form a bowl, and bend the rest down and secure it with a hose clamp.

Quote:
Originally Posted by ickma
I just made a vaporizer out of nothing but a night light bulb. First use a hacksaw to cut the very tip of the metal part off. Being VERY careful to not break the bulb use a screwdriver to take out all the glass and metal shit that makes the light. You should just have a glass bulb shaped dome with a hole in the top now. Take your very finely ground 'tobacco' and put a little bit in the bottom. With your thumb over the hole heat the tip of the bulb which should be pointed down. This is the tricky part which takes some practise but if you do it right the bulb with fill with vapour and not smoke. Don't heat the bulb constantly or too long or else it will break or the 'tobacco' will burn and start to smoke. Once the bulb is full up take your finger off the top and use a straw to suck out all the vapour. THere is very little smell because there's no smoke so you can do this pretty much anywhere and blame the little smell there is on bad beans or something. You should NOT have any smoke and it tastes kinda minty.
What is the powdery coating on the inside of the bulb made of?

Hint: it's toxic
MSD is offline  
Old 08-19-2004, 08:31 PM   #12 (permalink)
Tilted Cat Head
 
Cynthetiq's Avatar
 
Administrator
Location: Manhattan, NY
Quote:
Originally Posted by MrSelfDestruct
Take a Frappucino Bottle, tap a hole in the cap off toward the edge, and put a piece of aluminum pipe in so it almosts touches the bottom. Tap another hole in on the other side, and put a piece of rubber tubing in so you have a foot or two outside of the bottle and an inch or two inside. Wrap enough duct tape around that it's airtight. Put a piece of screen patch (for window screens) over the pipe, push it down to form a bowl, and bend the rest down and secure it with a hose clamp.



What is the powdery coating on the inside of the bulb made of?

Hint: it's toxic
maybe that's what gives it that "special" kick.
Cynthetiq is offline  
Old 08-19-2004, 09:21 PM   #13 (permalink)
Insane
 
Location: Bay Area
My old housemates made a gravity bong out of a beer mug, the top of a little incense burner, and a Coke bottle. Fucked up my soldering iron putting a hole in the bottlecap though... damn stoners.

They cut the bottom of the bottle off and burnt a small hole in the cap. The part from the incense burner fits in the hole and holds the green. The beer mug is filled partway with water. With the cap off, stick the bottle in the mug and slide down till the opening is at the bottom of the mug. Put the cap with attachment back on, light, slowly pull up bottle until the bottom of the bottle is almost out of the water. You should seem some nice smoke inside the bottle now.

Remove cap, put you mouth around the mouth of bottle. Inhale while pushing the bottle down but be careful not to inhale any water.
westothemax is offline  
Old 08-19-2004, 10:28 PM   #14 (permalink)
Insane
 
Location: Toronto
Quote:
Originally Posted by MrSelfDestruct

What is the powdery coating on the inside of the bulb made of?

Hint: it's toxic
I would assume its phosphorous but I forgot to mention to use a clear bulb . I also figured the stuff inside was toxic so I havent used a frosted bulb and it looks like I made the right choice.
ickma is offline  
Old 08-19-2004, 10:42 PM   #15 (permalink)
In transition
 
Location: north, no south abit, over to the right, getting warmer...there!
Dont use a can like stated before. It burns off something that you dont want to be breathing in. The apple one is a good one. After you can eat the apple.
matteo101 is offline  
Old 08-20-2004, 01:33 AM   #16 (permalink)
lonely rolling star
 
sadistikdreams's Avatar
 
Location: Seattle.
THANKS YOU GUYS!

Oh man. I am totally trying the apple.
__________________
"Besides the noble art of getting things done, there is the noble art of leaving things undone.
The wisdom of life consists in the elimination of non-essentials.
"
-Lin Yutang

hearts, by d.a.
sadistikdreams is offline  
Old 08-23-2004, 10:24 AM   #17 (permalink)
Psycho
 
Location: Dreams
Wow, thats a neat idea for a vaporizer! I made a different kind of Lightbulb Vaporizer once and it worked alright but very annoying to use, especially since the lightbulb gets covered with this black stuff from the flame you had to hold under it. I might have to try this out

edit: yeah so i started this reply before the second lightbulb method was mentioned but anyone wanting to replicate it should follow the link in my post, it is quite thorough.
__________________
I know not how I may seem to others, but to myself I am but a small child wandering upon the vast shores of knowledge, every now and then finding a small bright pebble to content myself with. [Plato]

Last edited by kalisto_911; 08-23-2004 at 10:30 AM..
kalisto_911 is offline  
Old 08-24-2004, 04:20 PM   #18 (permalink)
Insane
 
Location: Toronto
Another idea I just heard was to make a bong out of absolutely nothing. First, roll a joint and fill your mouth with water. Cup your hands together and make a seal around your mouth while holding the joint in between your hands. Tilt your head down and start to inhale. Keeping in mind the joint should not be in your mouth and the tip where you inhale will be close to the edge of your hand. Use a candle to light it and the water in your mouth should act like a bong. Just be careful to spit out the water after everyhit or you get bongwater in your mouth and all the crap you just filtered out gets into you anyways. If this is too confusing maybe I'll make a picture...
ickma is offline  
Old 08-24-2004, 06:10 PM   #19 (permalink)
Banned from being Banned
 
Location: Donkey
Cut the end of a broomstick off.

Use a drill, drill holes in the form of a pipe.. one going top/down into one end, and another going straight up the middle to the top/down hole.

Buy a water faucet screen for 50 cents from a hardware store, fit it inside the top/down hole.

You now have a nice pipe.

(assuming you have a drill, a broomstick, and 50 cents )
__________________
I love lamp.
Stompy is offline  
 

Tags
howto, make, pipe


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 01:56 PM.

Tilted Forum Project

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360