Confederate

I pulled 2 old hard drives out from my old computers and I am wondering how I can hook them up to mine so I can see if I can recover any files off of them. any advice? BTW I already have two hard drives hooked up now, a master and a slave(obviously), and i was hoping i wouldn't have to pull one out to put another one in.

mikec

external enclosures that convert ide to usb, or a pci ide card. what about your other ide chain? 2 cd drives?

__________________
Until the 20th century, reality was everything humans could touch, smell, see, and hear. Since the initial publication of the charted electromagnetic spectrum, humans have learned that what they can touch, smell, see, and hear is less than one millionth of reality

Dilbert1234567

just pop the cable from the CD on teh second ide and plug in the HD when your done recovering the data switch them back.

__________________
Donate Blood!

"Love is not finding the perfect person, but learning to see an imperfect person perfectly." -Sam Keen

Confederate

could i pull the cables off of my cd drives and plug it straight into the drive? how would i set my drive's jumpers for that? or configure my bios to do it?

mikec

yes you can do that. the jumper config should be on the drive, or you can look it up via model # search on the company's site. in bios as long as the ide's are set auto detect you will be fine.

__________________
Until the 20th century, reality was everything humans could touch, smell, see, and hear. Since the initial publication of the charted electromagnetic spectrum, humans have learned that what they can touch, smell, see, and hear is less than one millionth of reality

Lasereth

Take the cable that your CD drive is on and plug both old hard drives onto it. Just match up the jumpers correctly on the hard drives. The connector at the end of the cable is Master and the connector in the middle is Slave. The jumpers are on the back of the hard drives...there should be a little diagram on the hard drive showing you where to put the jumper for a Master or Slave setting.

-Lasereth

__________________
"A Darwinian attacks his theory, seeking to find flaws. An ID believer defends his theory, seeking to conceal flaws." -Roger Ebert

Confederate

coo, should I set it to slave or CSEL?

Lasereth

I always get errors with CSEL. I'd simply set the hard drive to slave if it's on the middle connector.

-Lasereth

__________________
"A Darwinian attacks his theory, seeking to find flaws. An ID believer defends his theory, seeking to conceal flaws." -Roger Ebert

Confederate

i got it guys thanks

Dilbert1234567

, cable select is usaly a bad solution, it cuases to many troubles for me.

__________________
Donate Blood!

"Love is not finding the perfect person, but learning to see an imperfect person perfectly." -Sam Keen