Quote:
Originally posted by Confederate
could i pull the cables off of my cd drives and plug it straight into the drive? how would i set my drive's jumpers for that? or configure my bios to do it?
|
Take the cable that your CD drive is on and plug both old hard drives onto it. Just match up the jumpers correctly on the hard drives. The connector at the end of the cable is Master and the connector in the middle is Slave. The jumpers are on the back of the hard drives...there should be a little diagram on the hard drive showing you where to put the jumper for a Master or Slave setting.
-Lasereth
__________________
"A Darwinian attacks his theory, seeking to find flaws. An ID believer defends his theory, seeking to conceal flaws." -Roger Ebert
|