Fob_Magi

they make 32 round mags for CZ-75 pistols in 9mm... maybe .40 ... I believe the witness pistols are just CZ-75 clones... I have an addy for 32 rounder 9mm clips at work.. I'll try to remember to post it.

and speaking of pistol elitists... I love my CZ... bugger the rest of you :P

CZ P-01
Completed the following without failure:
4000 dry firings
3000 De-cockings
Operator level disassembly 1350 times with out ware or damage to components.
Complete disassembly 150 times, this is all the way down, pins, springs etc.
100% interchangability, any number of pistols randomly selected, disassembled, parts mixed and reassembled with no failures of any kind including loss of accuracy.

Drop test
1.5 meter (4.9”) drop test, this is done 54 times with the pistol loaded (blank) and the hammer cocked. Dropping the pistol on the butt, the muzzle, back of the slide, sides of the gun, top of the slide, in essence, any angle that you could drop the gun from. This is done on concrete and 0 failures are allowed! A failure is the gun firing.

3meter drop (9.8”) 5 times with the pistol loaded (blank) and the hammer cocked, This is done on concrete and 0 failures are allowed! A failure is the gun firing.

After these tests are complete the gun must fire without service.

The factory contracted an independent lab to do additional testing on guns that previously passed the drop tests. These pistol were dropped an additional 352 times without failure.

The pistol must also complete an environmental conditions test:
This means cold, heat, dust/sand and mud.
The pistol must fire after being frozen for 24 hours at –35C (-36F).
The pistol must fire after being heated for 24 hours at 70C (126F)
The pistol must fire after being submerged in mud, sand and combinations including being stripped of oil then completing the sand and mud tests again.

The pistol will exceed 30,000 rounds with ball 9mm.

The reliability requirements for the P-01 pistol are 99.8%, that’s a .2% failure rate.
This equals 20 stoppages in 10,000 rounds or 500 “Mean Rounds Between Failure” (MRBF)
During testing, the average number of stoppages was only 7 per 15,000 rounds fired, this is a .05% failure rate, a MRBF rate of 2142 rounds! Over 4 time the minimum acceptable requirement.
The U.S. Army MRBF requirement is 495 rounds for 9mm pistols with 115 grain Ball ammunition.

__________________
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of himself without that law is both.
For a wounded man shall say to his assailant, "If I live I will kill you, if I die you are forgiven".
Such is the Rule of Honor.