Tilted Forum Project Discussion Community  

Go Back   Tilted Forum Project Discussion Community > Interests > Tilted Weaponry


 
 
LinkBack Thread Tools
Old 08-04-2003, 10:42 AM   #1 (permalink)
Upright
 
M16A2 or M4 Carbine?

A lot of military units have switched over from the M16 to the M4. Anyone here military that has used both? What are your impressions on the new M4 as opposed to the 16?
__________________
It ain't a sin, to take off your skin, and dance around in your bones!
zero.g is offline  
Old 08-04-2003, 10:49 AM   #2 (permalink)
Riiiiight........
 
I haven't had any experience with the M16A2 versions of the M16, so I can't really comment here. Here's something i googled out...


http://www.mca-marines.org/Gazette/2002/02Dailey.html

The M4 Carbine: Is It for Everyone?
by GySgt John A. Dailey

How does the M4 measure up?


Much has been written recently concerning the M4A1 carbine and its possible application as a replacement for the M16A2 service rifle. I believe serious consideration should be given to this and will explain why by discussing the history, components, advantages, and drawbacks of the M4A1 carbine.


A shortened or carbine version has been around almost as long as the M16 itself. The XM177 was developed and fielded to special operations forces (SOF) in the mid-1960s and, with minor modifications, has remained in use with SOF units ever since. In 1994 Operational Requirements Document 1.14 was approved, and the search began for a weapon to replace the MP5 that force reconnaissance Marines and others used during close quarters battle (CQB) operations. The M4A1 carbine was developed by Colt for the government of Abu Dhabi in the mid-1980s and used as the basis for the CQB weapon (CQBW) that was developed jointly by the U.S. Army and Marine Corps. The CQBW was initially fielded to the Marine Corps force reconnaissance, fleet antiterrorism security teams, and military police special response teams in 1999. The weapon was issued as a replacement for the MP5 and other nonstandard submachineguns.1


The CQBW consists of the 5.56mm M4A1 carbine with a flat top upper receiver configured with the military standard 1913 (MilStd 1913) accessory mounting rail. The handguards were replaced with the M4 rail adapter system (RAS) that provided four additional MilStd 1913 rails for the weapon.2 The M4A1 is equipped with a collapsible four-position stock and is capable of both semiautomatic and automatic fire. In addition to the weapon itself, receiving units were issued all or part (mission dependent) of the special operations peculiar modification (SOPMod) kit. This kit contains accessories designed to enhance the capabilities of the M4A1 carbine in regard to target acquisition, engagement, and ease of use. The SOPMod kit components are listed below with a brief description of their function.


Backup iron sight (BIS).3 This sight attaches to the rear of the upper receiver MilStd rail and flips up for use in the event that the mounted optics should fail. Due to lack of agreement between the Services this item was not included in the SOPMod kit. 1st Force Reconnaissance Company purchased Knight’s Armament Company BISs from the manufacturer.


Detachable carry handle. Identical to the M16 carry handle, the accessory attaches to the upper receiver MilStd rail and provides the Marine with the standard rear sights. This piece of gear should be removed from the kit. We do not use the carry handle for carrying the weapon, and far superior sights are included for use (more on this later).


Vertical foregrip.4 The foregrip attaches to the lower RAS rail providing the shooter with more precise control during firing.


M203 quick detach mounting bracket.5 The quick mount bracket can be attached to both the standard 15.5-inch tube and the M4A1-specific 9-inch tube. This allows the M203 to be quickly mounted to the M4A1 after removing the lower M1913 MilStd rail. One item of note, the modified leaf sight for the M203 was not included in the SOPMod kit.


Rail grabber accessory kit AN/PAQ–4C6 (infrared aiming light) and AN/PEQ–27 (infrared aiming light/illuminator). This attachment provides a screwon rail grabber that allows both the AN/PVS–4 and the AN/PEQ–2 to be attached to the rail assembly.


Quick detachable (QD) sound suppresser with compensator.8 After installment of the compensator the sound suppresser is easily attached/ detached reducing muzzle flash and decreasing sound by a minimum of 28 decibels.


Visible light illuminator.9 Six AA cell (or 3 DL123) battery-powered, rail-mounted, waterproof flashlight capable of producing 90 to 100 lumens. Used for CQB operations.


Trijicon close quarters battle reflex sight.10 A lightweight nonmagnifying optical sight that provides a parallax free aiming dot useful from close quarters out to 300m. The sight is waterproof to 66 feet for 8 hours and requires no batteries. While this sight is not dependent on batteries, the dot is also very difficult to pick up rapidly. This is especially true during BMNT/EENT (begin morning nautical twilight/end evening nautical twilight). (According to MAJ Robert Rogers, founder of the Rangers, this is when the “Indians” attack.) A far superior sight, not included in the SOPMod kit is the M–68 Aimpoint™ M-XD. This sight operates on one lithium 2L76/DL 1/3N or two silver oxide 357 batteries. These sights possess the waterproof characteristics of the Reflex sight but provide a variable intensity red aiming dot that can be used with or without night vision devices (NVDs) in any lighting or weather conditions. In the newest version, the Aimpoint™ Comp M2 battery life is reported to be 10,000 hours.


Advanced combat optical gunsight (ACOG) day optical scope (DOS). This is a four-power scope designed to enhance target identification and increase hit probability out to 600M. The reticle pattern aids in range estimation.


Tactical sling. The purpose of the tactical sling is to provide a comfortable, safe, and ready method of carrying the rifle when required. The tactical sling is not a shooting aid. As a former weapons instructor CWO3 Patrick Rogers, USMC(Ret) says, “The tactical sling is to the carbine as the holster is to the pistol.” The sling allows the Marine to release his weapon while transitioning to a secondary weapon or when both hands are required in order to climb, deal with a prisoner, or other situation. I am not a fan of any of the issued three-point slings. A more effective sling produced by The Wilderness Tactical Products consists of a single attachment point routed through a sling keeper mounted at the base of the stock/receiver. The loop is placed over the head and weak side arm. A fast-tec buckle provides the ability to cut away the weapon if required. This single point sling prevents the alleged problem that left-handed shooters have had with ejected casing bouncing back into the ejection port. The tactical sling was designed for CQB/military operations on urbanized terrain operations and should not be considered a patrolling sling. In my opinion there is no such thing. On patrol a sling creates unnecessary noise and should be left at home.


Carry case. A soft gun bag produced by Eagle Industries provides a means of transporting the M4A1 weapons system and its components.


In order to make the M4A1 even more user-friendly an extended charging handle is available that allows Marines to easily cycle the bolt with the nonfiring hand while remaining up on target. This becomes even more crucial with the addition of many optics in which the attaching screws extend from the left-hand side of the weapon. Additionally, an ambidextrous safety and magazine release is available to make the weapon more ergonomic for left-handed shooters.


It became quickly apparent to the Marines of 1st Force Reconnaissance Company that in addition to CQB operations, the versatility and modular nature of the M4A1 carbine suited it well as the patrolling weapon of choice. The obvious logic being that with only one weapon to master, proficiency would be greatly improved, and equipment could be streamlined with magazine and equipment placement standardized between patrolling and CQB operations. Most important however was the increase in capabilities of force reconnaissance platoon during infiltration to and extraction from a CQB objective. The limited range and inadequate terminal ballistics of the 9 x 19mm round left the maritime special purpose force assault element poorly prepared for contact outside of the objective site.


I have read reports of dissatisfaction with the M4A1 during testing conducted by infantry units. The weapon was called the M4A1 modular weapons system (MWS) during this test.11 I believe that while several points are valid, the bulk of the complaints are based on misunderstanding, misuse, inadequate training, lack of trust in the capabilities of the individual rifleman and, perhaps most importantly, a fear of change. I would like to address the most common complaints point by point and attempt to clarify why I feel that the M4A1 is indeed a more capable infantry weapon.


Difficulty mastering the weapon. I was among the first to receive the M4A1 and have had the opportunity to teach the weapon and its components to four force reconnaissance platoons, military police special response teams, and others. I do not claim to have mastered it or any other weapon. I consider myself to be proficient, but that proficiency has come at the price of years of training, excellent instruction, and tens of thousands of rounds. We will not allow our Marines the opportunity to come close to mastering any weapon until we increase ammunition allotments and provide them with realistic combat shooting instruction and training. Multiple award experts or distinguished shooting badges do not combat shooters make. At 1st Force Reconnaissance Company all Marines are required to attend a 3-week weapons and tactics transition course that includes instruction and practical application on the use and employment of all optics and weapons components, as well as emphasizing the capabilities and limitations of the weapon.


Zeroing weapon and optics/Loss of zero. Through experience we have determined that it is preferable to establish an initial battlesight zero (BZO) on all sights at 25 yards with a desired point of impact 1 inch below the point of aim. This provides us with the ability to accurately engage targets from CQB distances out to 300 yards. This zero, of course, must be confirmed at range. The chart below depicts a typical ballistic trajectory when firing the 5.56mm ball round from a 14.5-inch barrel.12



We can see that at no point between 3 and 300 yards will the trajectory of the round rise or fall more than 3.6 inches from the point of aim. I consider this to be acceptable accuracy. I have yet to speak to a veteran infantryman of any war who has made a sight adjustment while in a firefight. Numerous studies confirm that the possibility of engagements occurring at distances greater than 300 yards is minimal at best, with the average infantry engagement taking place within 125 yards. There are very few locations on the planet Earth not covered by water (except for our known distance ranges) in which a Marine in a prone position can even observe an enemy at distances greater than 300 yards due to terrain and vegetation. Exceptions may occur in the desert or when observing up- or downhill; however, we do not teach angle shooting during our week of annual range time. With proper elevation applied, at a range of 500m firing up or down a 30 percent slope, the point of impact of the M855 ball will be almost 1 foot above the point of aim.13 The ballistic trajectory of the 5.56mm round drops off sharply after 300m when fired through either the M6A2 or the M4A1 carbine. If engaging targets with the weapons at BZO, a Marine will almost certainly not hit anything beyond 300m. Zeroing should first be conducted with the backup iron sight. Once this sight is zeroed it can be used to establish an approximate zero on the dot-type sights by properly mounting and tightening the sight. Then the windage and elevation adjustments are used to move the aiming dot until it is centered in the rear sight aperture and sitting on the tip of the front sight post. This expedient zero must be confirmed; however, it will put the optics in the ballpark and reduce the time required to achieve a BZO. All RAS rail notches are marked with a numerical system. It is imperative that if removed after zero the optic is returned to the same location—“address”—and tightened to the same degree (hand tight plus 1/4th turn). If removed after zero has been established the RAS assembly and laser devices should return to within 1 minute of angle (MOA). Optics should return to 1/2 MOA. An MOA is defined as 1 inch per 100 yards. Keeping rail surfaces covered when not in use can enhance return to zero.


Weapon length, muzzle velocity, and terminal ballistics. Figure 2 lists the relevant data concerning the differences between the M4A1 carbine and the M16A2 service rifle.14





Both weapons are rifled in a 1-inch, seven right-hand twist meaning that a projectile fired from the M16A2 completes almost one more full revolution prior to reaching the end of the barrel. It is true that the greater the number of revolutions the projectile completes within the barrel the greater the accuracy and that higher muzzle velocity usually equates to superior terminal ballistics. On the surface it would seem that the M16A2 is a superior rifle; however, several other factors must be taken into consideration. If we want to discuss retained velocity, terminal ballistics, and the effect of a projectile upon the human body we must first ensure that we can accurately place our round into the human body. Our ability to easily manipulate our weapon greatly contributes to this ability. While the M16A2 is a relatively ergonomic weapon in regard to manipulation, it does have several problems. The length of both stock and barrel are well-suited for known distance target shooting (the Marine Corps rifle team’s influence is seen here) but is not what we are looking for in a combat rifle. The M16A2’s 13.5-inch length of pull is generally too long for the average Marine in an aggressive Weaver type (basic warrior) fighting stance when wearing a flack jacket and load-bearing equipment. The M4A1 has a variable length of pull from 10.5 to 13 inches. This allows the Marine to rapidly shoulder the weapon from a proper fighting stance (or any other position) with combat gear. The reduced barrel length allows the weapon to be more easily maneuvered in restrictive terrain, urban areas, vehicles, and aircraft. Again, we must understand (as numerous studies have shown) that it is unlikely that we will often be required to engage targets beyond 200 yards. At this range the retained velocity of the 5.56mm round fired from a 14.5-inch barrel provides adequate terminal ballistics.


Fully automatic capability. One of the changes in design between the M16A1 and the M16A2 was the removal of the fully automatic capability and the replacement with the three- round burst. This was due no doubt to the alarmingly high rate of rounds expended per kill during the Vietnam conflict. I do not often advocate the use of fully automatic fire, but it is nice to know that it is there if you need it.


Sight radius. The sight radius is the distance between the front and rear sight. Obviously, if all other factors remained unchanged the longer the sight radius the more accuracy the shooter would be capable of. This is a simple matter of physics. The drawback to a longer sight radius is that the amount of time required to acquire a proper sight picture is also lengthened. The dilemma becomes one of speed versus accuracy. While we cannot miss fast enough to win, we must also realize that in gunfighting, second place is last place. Speed and accuracy are inversely related to distance. In a close range engagement scenario, speed is more important than pinpoint accuracy. At distance, more time is required (and generally available) to achieve acceptable accuracy. This entire point will become moot, however, when discussing the next topic.


Optics versus iron sights. As stated previously, the SOPMod kit contains several optical sights—the Reflex nonmagnified day/night optic, the Trijicon four-power scope, and the AN/PVS–17 magnified nightscope. Additionally, some testing units were issued various other optical sights that included Hensoldt, Leopould, U.S. Optics, and C-More sights. I won’t go into the pros and cons of each sight, but I will place them into three categories—magnified optics, nonmagnified optics, and NVDs. The one thing that these three categories of optics have in common is that a single aiming device is used—either a dot or reticle pattern. This eliminates the previous discussion concerning sight radius and relieves us of the necessity to align a front sight tip vertically and horizontally within a rear sight aperture. It also begs the question, why was a carrying handle issued with the M4 carbine? Perhaps we are so afraid of change that it is easier to stick with the same technology that has been in use since the advent of the firearm. As Marines we operate under the assumption that if it can be broken, it will break. Certainly, while rugged, most optics require batteries that can fail or lenses that can break. There are several remedies to this problem. All of the optics, with the exception of the NVDs, consists of a circular lens opening that can be looked through without battery power or if one or more of the lenses break. If these problems are encountered and the optic is properly mounted on the upper receiver rail where it should be, and not the top of the carry handle, the front sight post can be centered in the circular aperture, and the sight can be used as a large rear sight aperture. This is not as difficult as it sounds. Regardless of the size of a circle, the human eye is instinctively drawn to its center. Accuracy will be degraded somewhat; however, we are operating under the assumption that the tactical situation is such that the Marine is in a position that requires him to engage a threat immediately. If there is time the Marine simply flips up the backup iron sight. This can be achieved without removal of the optical sight except in the case of the ACOG DOS and AN/PVS–17, which due to eye relief must be removed in order to flip up the iron sight.


Magnified optics. This family of optics for the M4 generally offers between three- to five-power magnification and provides some form of reticle pattern, often with the ability to assist in range estimation. Some training in the use of a scoped weapon is required because while we now have only one aiming point, eye relief is fixed and parallax (the apparent movement of the reticle across the target as the head is moved) can become an issue. Failure to align the reticle posts horizontally and vertically and eliminate scope shadow will cause a round to impact off of the point of aim. Magnified optics give us the ability to observe, identify, and engage targets at greater ranges than iron sights. They do, however, have the disadvantage of reducing the field of view and increasing target acquisition time at close ranges.


Nonmagnified optics. This family of optics consists of an aiming dot imposed inside the ocular lens of the sight. Unlike laser sights made popular in the movies, no beam is projected from the weapon. The dot is parallax free, meaning that the relative position of the dot within the optic is unimportant except at long ranges when precision accuracy is required. These sights are designed to be used with both eyes open greatly increasing the field of view and enhancing the Marines situational awareness. Within this group of optics there is the nonbattery powered Reflex sight issued with the SOPMod kit that, as discussed under the SOPMod component portion, I consider difficult to use. A far superior sight in my opinion is the M68 Aimpoint™ M-XD. This sight is battery powered; however, the dot brightness is adjustable and can be seen immediately in all lighting and weather conditions.


Night vision sights. While any NVD equipped with a rail grabber assembly can be mounted on the M4A1, I will concentrate on the AN/PVS–1415 night vision monocular and the AN/PVS–1717 mini night vision sight (MNVS). Both are third-generation night optics that provide superior clarity and definition. The AN/PVS–14 is a nonmagnified, hand-held, head-, helmet-, or weapon-mounted night optic. This optic contains no aim point but can be used in conjunction with the AN/PEQ–4 or AN/PEQ–2, and can be equipped with a screw-on three- or five-power magnifier. The AN/PVS–17 (MNVS) is a 2.25 magnified (a 4.25-power version is available) head- or weapon-mounted night sight with a variable intensity red aiming dot. This sight has proven effective to beyond 300m. As it is a magnified optic, which is fix-focused at infinity, it does not provide a clear image within 25m.

While I am on the subject of night vision, I must relate what I feel to be an incredibly troubling point. It was recommended that during testing each Marine be equipped with night vision capability. Sufficient numbers of NVDs were not available due to the battalion table of equipment. Requests were made to ignore the recommendation based not on the availability of night optics or quality of training that would be received but on the burden that would be placed on the support and maintenance shops. Further rationalizations included the argument that as Marines we fight as teams; therefore, not every Marine needs the ability to see at night. We need to pull our heads out of the trenches and realize that the battlefields of tomorrow will be more decentralized than ever before. The days of the squad set of NVDs are in the past. Optics allow for engagement at greater ranges and increase first-round hit probability dramatically especially during darkness/low-light conditions. He who owns the night wins. We are grossly negligent if we do not ensure that every Marine rifleman is equipped with some form of optic, NVD, and a compass and knows how to use them. As for the support and maintenance overburdening, well fellas, things are tough all over.


Bolt/gas/extraction problems. Representatives from Colt have identified that due to the shorter gas and recoil system, cracks may develop in the second and seventh bolt lugs after 10,000 rounds. These lugs could break off at around 20,000 rounds. Colt claims that this should have no impact on the function of the weapon. While this could obviously affect the Marine carrying the rifle, at the rate infantry units fire, it will be many years before this number is reached. I have trained or trained with over 100 Marines firing the M4 carbine and have observed only one broken bolt face. Many of our weapons have fired well in excess of 10,000 rounds. We must also stop thinking of our infantry weapon as a one-time investment. Scheduled maintenance will detect these flaws and ensure that our weapons will be ready when we need them. Another problem reported was weak extractor springs that supposedly induced type 3 malfunctions (double feeds). I have not noticed this to be true in a functionally clean weapon.


Overheating. Claims have been made that the RAS handguards heat up more quickly than standard handguards. I have not found this to be true. A deficiency noted upon delivery of the first M4A1s was a tendency for the lower heat shield to detach. This has since been corrected. A requirement with the use of the RAS is to ensure that the unused portions of the 1913 MilStd rails are covered with the handguard sections. These not only protect the shooter from heat and cuts caused by the rail surfaces, but also protect the rails from damage and ensure zero retention.


Bayonet techniques and close combat. It may appear that due to its reduced length and collapsible buttstock, the M4A1 is poorly designed for close combat. An available SOPMod enhanced stock will provide more rigidity in the rear of the weapon while executing a smash, horizontal, or vertical butt stroke. While a collapsible stock will never possess the rigidity of a fixed stock, we must keep in mind that these are softening techniques and distraction used in order to set the enemy up for a killing thrust. Utilizing the linear fighting techniques incorporated in the Marine Corps Martial Arts Program, length of weapon does not equate to advantage in combat.


Rifle racks. The current rifle racks were not designed to hold the M4A1 carbine. Obviously, replacing the Marine Corps’ inventory of rifle racks will be costly; however, a rack must be modified or designed that will securely hold the weapon with components attached. This will greatly enhance zero retention and limit premission preparation time by allowing Marines to store weapons with their mounted components attached. This may cause problems with accountability; however, we are enhancing the readiness of our Marines.


Loss of components. One of the most inane criticisms of the M4 has been the fear of Marines losing the modular components. I would recommend that all mounted optics be checked daily for tightness. Most of the components can be easily dummy-corded to further ensure retention.

If we still do not feel that we can entrust our Marines with equipment that will increase their ability to accomplish their mission, then we must first take a hard look at ourselves as leaders. Perhaps we should issue a hip pocket class on the leadership trait of responsibility, or we could require our Marines to use only weapons of opportunity found on the battlefield.

Another related complaint is that the modular nature of the weapon provides too many options that may overwhelm the individual rifleman and increase mission preparation time. There are several base configurations that will serve well during most operations. The modular nature allows weapons capabilities “mix” to the small unit leader. While a point man may require a dot-type sight for close range chance contacts, it would also be beneficial to have several Marines equipped with a magnified optic capable of detecting and engaging at greater ranges. A complaint of testing units was that it became difficult to change weapons components during cold weather. Modular does not mean that we have to switch optics, components, or buttstock length in midpatrol. In most cases, once established, components will not frequently change unless there is a change in mission. The only change that may be required during a patrol is the attachment/removal of the night vision. I have found this to be easily accomplished at night and with heavy gloves. As with anything else, proficiency comes with practice—and we need more of it.


It is my opinion that the M4A1 carbine is indeed a superior infantry rifle. It is based on a proven design with which all Marines are familiar and is equally well-suited for operations in all types of terrain, to include use in urban environments. It provides our infantry unit leaders with the ability to rapidly prepare for combat under varying situations while allowing them to employ the latest in target acquisition technology. Its modular nature allows us to upgrade components as improvements become available. We must stop using our known distance range as a basis for the evaluation of our combat weapons. We must equip our Marines with every possible advantage. Most importantly, we must get our weapons out of the armory and into the hands of our Marines. We must give our infantry Marines the opportunity and ammunition required to become proficient with their individual weapons. Perhaps in addition to a new weapon we need a new attitude concerning our opinions of the capabilities of our combat elements.


Current Developments
The events of 11 September 2001 shocked the world and drastically changed the deployment plans of the 15th Marine Expeditionary Unit (Special Operation Capable) (MEU(SOC)). Along with all of the Marines and sailors of the 15th MEU and Peleliu Amphibious Ready Group, 2d Platoon, 1st Force Reconnaissance Company conducted a wide variety of operations. Missions ranged from securing the initial airfield in Pakistan to providing sniper support, observation posts (OPs), and personal security detachments in Jacobabad, Pakistan. After the 15th MEU(SOC) secured Forward Operating Base Rhino, force reconnaissance teams conducted numerous, mounted, long-range reconnaissance patrols. Additionally, the platoon was tasked with searching and securing detainees, conducting a direct action raid, and providing the assault element during interdiction operations on Highway 1, west of Kandahar.


During all operations, the primary weapon of the force reconnaissance Marine was the M4A1 carbine equipped with the SOPMod kit. The weapon performed flawlessly in the harsh terrain and weather conditions, and its size improved maneuverability in vehicles and in urban areas. The reliability, versatility, and the ability to change weapons configurations as the situation required (often at night and in extreme cold) allowed the Marines of 2d Platoon to select the optimum capabilities mix for each mission. All optics, when properly mounted, retained an acceptable zero even after numerous change outs and hundreds of kilometers of vehicle movement over the rough desert terrain of southern Afghanistan.


During daylight OPs most team members opted for the ACOG DOS, as this optic afforded a greater observation standoff. At night the AN/PVS–17, used in conjunction with the AN/PEQ–2, made it possible to illuminate and observe areas that would have otherwise been inaccessible. For operations in built-up areas, the Aimpoint™ Comp ML provided the rapid target acquisition required in close quarters. The QD suppressor gave the capability to silently remove dogs or sentries had it been required. When conducting nighttime highway interdiction operations, the visible light illuminator enabled rapid target identification. This provided a decisive advantage to the 2d Platoon Marines and served to temporarily stun the occupants of a vehicle during a short, but volatile close-range firefight that left at least seven enemy dead and destroyed a large fuel and ammunition cache.


In conclusion, our relatively short stay in Afghanistan provided a real-world test bed that verified my initial assessment of the M4A1 carbine.

The war on terror will continue. The very nature of this war calls for the employment of small units trained and equipped to take the fight to the enemy on the most uncertain of battlefields. The first step in winning this war is to further empower our small unit leaders. We must provide them with the ammunition and training opportunities required to develop the individual and unit skills needed for this type of war. The second step is to equip our Marines with the best weapons and technology available, teach them how to use it, and trust them to take care of it. The M4A1 carbine with the SOPMod kit answers the call as a combat rifle capable of combining a known and proven design with a versatile, modular group of components that will enhance the capabilities of our Marines.


Notes

1. Commander, Marine Corps Systems Command message: “Fielding Conference For The Close Quarters Battle Weapon (CQBW).”

2. Draft, User’s Logistics Support Summary for the Close Quarters Battle Weapon, ULSS 00993–15.

3. Backup Iron Sight Operator’s Manual, SW370–BT–OPI–010.

4. Forward Handgrip Operator’s and Armorer’s Manual, SW370–B8–OPI–010.

5. M203 Grenade Launcher Mount Operator’s and Armorer’s Manual, SW370–B9–OPI–010.

6. AN/PAQ–4C Infrared Aiming Light Operator’s Manual, TM 09596C–12/2.

7. Target Pointer Illuminator/Aiming Light Operator’s and Unit Maintenance Manual,
TM 10470A–12&P/1A.

8. Quick Attach/Detach Suppressor Operator’s Manual, SW370–BP–OPI–010.

9. Visible Bright Light Operator’s Manual, SW370–BS–OPI–010.

10. Reflex Sight Operator’s Manual SW370–BM–OPI–010.

11. M4 MWS new equipment training after-action report.

12. Rogers, Patrick A, “The Tactical Carbine Course Workbook,” p.13.

13. SOPMod accessory kit for the M4A1 Carbine, ST23–31–1.

14. Operator’s Manual component list rifle M16A2, M16A4, M4 carbine, M4A1,
TM 05538D/10012B–12/1.

15. Operator’s Manual monocular AN/PVS–14, TM 10271A–10/1.

16. AN/PVS–17 MNVS Operator’s Manual, SW215–B90OPI–010.


>GySgt Dailey is the platoon sergeant for 2d Platoon, 1st Force Reconnaissance Company currently deployed with the 15th MEU(SOC).

Top of page

Back to Archives


--------------------------------------------------------------------------------

Home / On the Net / Archives / Advertising / Writer's Guidelines / Links / Subscribe / Change Address / FAQs / Site Map
©2003 Marine Corps Association. All rights reserved.
Contact the webmaster for questions or concerns regarding this web site.
Please refer to the FAQs for all other questions.
dimbulb is offline  
Old 08-04-2003, 03:02 PM   #3 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
I've used 'em both. I like the M-4, it's easier to deal with in a Bradley, and good for the sort of stuff me and my guys do. It does however have an effective range issue that favors the A2 in wide open places.

I'll write more later...
__________________

Fortunato became immured to the sound of the trowel after a while.

Last edited by debaser; 08-04-2003 at 03:05 PM..
debaser is offline  
Old 08-04-2003, 06:42 PM   #4 (permalink)
Psycho
 
It depends on the situation I would be in. If Im out in the open, I would want the standard A2. More accurate and comfortable to shoot. If I was inside a building, or in close quarters, I would take the M4. It being more compact it would be easier to manuver with, especially around corners. Also the fully automatic selection is nice if your clearing a room with multiple hostiles.
Exodus is offline  
Old 08-04-2003, 07:33 PM   #5 (permalink)
Riiiiight........
 
i do know that when it is time for range, (and the money awards that come with marksmanship awards) you suddenly see a lot of carbine users using M16s.....

Yup, spraying a room on full auto is what I've learn for clearing rooms in FIBUA (fighting in built up areas) or MOUT(military operations in Utrbanized Terrain) with a grenade of course.

the spraying of a room with auto fire doesn't seem very smart to me though.

For vehicular operation, I wished i had a carbine. The M16 is very unweildy inside the confines of an APC.

errrr.... and yes, rifle steel is VERY strong. Had an M16 barrel caught between the turret structure and the APC structure once. The turret steel bent before the M16. lucky for me....
dimbulb is offline  
Old 08-04-2003, 09:07 PM   #6 (permalink)
Junkie
 
G5_Todd's Avatar
 
Location: Reichstag
most units u see switching to the m4 are going to it for close combat reasons......


m4 is shorter in over all length trading long range accuracy for better muzzle control in close quarters....
__________________
"....and when you men get home and face an anti-war protester, look him in the eyes and shake his hand. Then, wink at his girlfriend, because she knows she's dating a pussy."

-General Franks
G5_Todd is offline  
Old 08-04-2003, 09:44 PM   #7 (permalink)
Upright
 
Standard issue is now the M16A4. (an A2 with a rail system, i've seen rifles with A2 scratched out and A4 re-engraved) The Marines are evaluating a switch for the entire force to M4s.

My bet is they won't do it and they'll wait for the OICW, our new rifle based around the G36 and a 20mm grenade launcher.
varus is offline  
Old 08-06-2003, 01:40 AM   #8 (permalink)
Psycho
 
Quote:
Originally posted by dimbulb


the spraying of a room with auto fire doesn't seem very smart to me though.

I would have to agree with you. Its not a very safe way to do things... especialy in a hostage situation. Point shooting is always best.
Exodus is offline  
Old 08-06-2003, 06:47 AM   #9 (permalink)
Buffering.........
 
merkerguitars's Avatar
 
Location: Wisconsin...
One of my friends has said the M16 is a big hunk of shit. He said it jams up to easily and won't accept ak-47 rounds but ak-47 can use their rounds.
__________________
Donate now! Ask me How!

Please use the search function it is your friend.

Look at my mustang please feel free to comment!

http://www.tfproject.org/tfp/showthread.php?t=26985
merkerguitars is offline  
Old 08-06-2003, 08:30 AM   #10 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
Quote:
Originally posted by merkerguitars
One of my friends has said the M16 is a big hunk of shit. He said it jams up to easily and won't accept ak-47 rounds but ak-47 can use their rounds.
Your friend is wrong on all counts.
__________________

Fortunato became immured to the sound of the trowel after a while.
debaser is offline  
Old 08-06-2003, 08:32 AM   #11 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
Quote:
Originally posted by Exodus
I would have to agree with you. Its not a very safe way to do things... especialy in a hostage situation. Point shooting is always best.
MOUT is not about hostage rescue, it is about killing people in the room. The full auto fire is preceeded by a fragmentation grenade.
__________________

Fortunato became immured to the sound of the trowel after a while.
debaser is offline  
Old 08-06-2003, 02:49 PM   #12 (permalink)
Junkie
 
I've heard many similar complaints about the M16/M4 system. Unreliability is the major one, esp. in dirty environments, followed by insufficiant stopping power. If the M16 design can be kept clean it's a great weapon, but unfortunately it's made with sugh tight tolerances that the slightest bit of dirt fucks it up. And, given that the gas bleeds directly into the reciever, carrying with it particles of soot and unburned powder...you get the picture.
As for the AK chambering the 5.56mm round, this is true, I've done it. It won't cycle the action, and it's obviously not accurate at all, but it will chamber and fire this cartridge.
Primary complaints surrounding the 5.56mm cartridge revolve around it's insufficiant stopping power at ranges over about 150 meters. For this reason, the SEALs are still issued a modernized version of the 7.62mm M14 battle-rifle. In addition, an entire Delta Force unit in Afghanistan ordered 7.62mm FAL rifles from D.S. Arms, here in the States, and ditched their M4's...got sick of having to shoot Abdul 5-6 times before he got the message.
While the 5.56mm round is very accurate, it was not designed as a manstopper; it's more commondesignation is .223 Winchester, and it originated as a varmint-hunting round...it wasn't designed for use against human targets, but against prarie-dogs and coyotes.
The_Dunedan is offline  
Old 08-06-2003, 03:06 PM   #13 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
Quote:
Originally posted by The_Dunedan
I've heard many similar complaints about the M16/M4 system. Unreliability is the major one, esp. in dirty environments, followed by insufficiant stopping power. If the M16 design can be kept clean it's a great weapon, but unfortunately it's made with sugh tight tolerances that the slightest bit of dirt fucks it up. And, given that the gas bleeds directly into the reciever, carrying with it particles of soot and unburned powder...you get the picture.
M-16s will run quite well with a bit of dirt in them, I know from experience. In fact on one excercise we ran all of our M-16s bone dry just to see how long they would function. No stoppages in 2 weeks out of a whole platoon. The reliablity issue is an urban legend left over from the early fieldings in Vietnam, where the wrong type of powder was used in the ammunition.
Quote:

As for the AK chambering the 5.56mm round, this is true, I've done it. It won't cycle the action, and it's obviously not accurate at all, but it will chamber and fire this cartridge.
The AK-47 will not fire a 5.56mm round. An AK-74 will, but it will cause a cartridge rupture that will render the weapon inoperable.
Quote:

Primary complaints surrounding the 5.56mm cartridge revolve around it's insufficiant stopping power at ranges over about 150 meters. For this reason, the SEALs are still issued a modernized version of the 7.62mm M14 battle-rifle. In addition, an entire Delta Force unit in Afghanistan ordered 7.62mm FAL rifles from D.S. Arms, here in the States, and ditched their M4's...got sick of having to shoot Abdul 5-6 times before he got the message.
Spec-Ops groups get to carry their choice of weapon. The M-4 does suffer from decreased performance at range, that is the consequence of a 14.5 inch barrel. The A-2 does very acceptable damage at ranges out to 200 meters (much further than most contemporary battles are fought):

Quote:
Wounding Effects of the U.S. Military M193 (M16A1) and M855 (M16A2) Bullet Cartridges

Exaggerated descriptions of the wounding effects of the M16 rifle bullet flourish as great works of urban lore. One fable describes a bullet that tumbles end-over-end in flight as soon as it exits the muzzle of the rifle. Another legend provides a dramatic account of an unstable, super-high velocity bullet that tumbles and chews its way through flesh like a buzz saw. Although there appears to be a tinge of half-truth behind these entertaining and awe-inspiring mythical tales, these stories do not represent an accurate description of the wounding characteristics of the M16 bullet.

When the M16 cartridge is fired and the bullet is propelled down the bore, the bore’s rifling imparts a gyroscopic spin to the bullet. This gyroscopic rotation is needed to maintain point forward stabilization of the bullet as it flies through the air. This method of bullet stabilization is identical to the rotational spin applied to a football when thrown by a quarterback (American football).

The Earth’s gaseous atmosphere is approximately 400 times less dense than the body's soft tissues. When the M16 bullet strikes and plows into the body, the rotational spin that stabilized its flight through the air is insufficient to maintain its stability as it flies through dense tissue. The bullet typically penetrates point forward for approximately 4-5 inches before it begins to seek a state of stability in the body.

The bullet’s pointed shape makes it heavier at its base than its nose, producing a center of gravity that is located aft of its longitudinal centerline. When the bullet hits the body and penetrates, the bullet attempts to rotate 180 degrees around its center of gravity to achieve a base forward orientation. This backwards orientation is the bullet’s stable position in tissue because it places the center of gravity forward.

As the bullet yaws through 90 degrees and is traveling sideways through flesh, the stress of tissue resistance to bullet passage can overpower the physical integrity of the bullet. The bullet has a groove around its midsection called a cannelure. The purpose of the cannelure is to permit the mouth of the cartridge case to be crimped tightly against the bullet shank to hold it firmly to the case. The cannelure weakens the structural integrity of the bullet's copper jacket.

At distances of 100 yards and under, when the bullet hits the body and yaws through 90 degrees, the stresses on the bullet cause the leading edge to flatten, extruding lead core out the open base, just before it breaks apart at the cannelure. The portion of the bullet forward of the cannelure, the nose, usually remains in one piece and retains about 60 percent of the bullet's original weight. The portion of the bullet aft of the cannelure, the base, violently disintegrates into multiple lead core and copper jacket fragments, which penetrate up to 3-inches radially outward from the wound track. The fragments perforate and weaken the surrounding tissues allowing the subsequent temporary cavity to forcibly stretch and rip open the multiple small wound tracks produced by the fragments. The resulting wound is similar to one produced by a commercial expanding bullet used for varmint hunting, however the maximum tissue damage produced by the military bullet is located at a greater penetration depth.

(The increased wounding effects produced by bullet fragmentation were not well understood until the mid-1980’s. Therefore the wounding effects of the original M16 rifle bullet were not an intentional U.S. military design characteristic.)

At distances between 100-200 yards the bullet commonly breaks in half at the cannelure forming two large penetrating fragments, the nose and base.

At distances beyond 200 yards the bullet usually remains intact due to velocity decay. It simply yaws 180 degrees to penetrate backwards through the body.

Both the M193 and M855 bullets demonstrate similar terminal performance as described above, when fired from rifles fitted with a 20-inch or longer barrel.

Shooting the M193 or M855 from a rifle with a barrel length less than 14.5-inches produces insufficient muzzle velocity to achieve the terminal performance described above. A rifle fitted with a 14.5-inch barrel is adequate for close-quarters battle. For engagements anticipated at greater than room distance but less than 100 yards, a rifle fitted with a 16.5-inch barrel should be employed to ensure sufficient velocity.

The older 55-grain M193 (M16A1) cartridge is not sensitive to rifling twist rate and can be fired in rifles with 1:12, 1:9 and 1:7 rates of twist. However, the newer M855 (M16A2) cartridge is best used with a rifling twist rate of 1:7 or 1:9. When the M855 is fired in a rifle with a slower rate of twist the longer 62-grain bullet can yaw up to 70 degrees in free trajectory through the air, substantially degrading accuracy.

The wound ballistics of the U.S. military Olin M193/Winchester 55 grain FMJ (X223R1 or Q3131) and green tip U.S. military Olin M855/Winchester 62 grain FMJ (RA556M855) cartridges makes them an adequate choice for use against violent criminal offenders.

Additional testing has indicated that errant bullets (military FMJ and commercial .223 Remington JSP/JHP) which do not hit an attacker appear to penetrate fewer walls and other common building materials than stray handgun bullets.
Quote:

While the 5.56mm round is very accurate, it was not designed as a manstopper; it's more commondesignation is .223 Winchester, and it originated as a varmint-hunting round...it wasn't designed for use against human targets, but against prarie-dogs and coyotes.
Given the way we now fight wars, it is by far the best military round in the world, as evidenced by the fact that it remains the NATO standard and will be used on the new OICW.
__________________

Fortunato became immured to the sound of the trowel after a while.
debaser is offline  
Old 08-06-2003, 04:59 PM   #14 (permalink)
Riiiiight........
 
Quote:
Originally posted by debaser
MOUT is not about hostage rescue, it is about killing people in the room. The full auto fire is preceeded by a fragmentation grenade.
yup, thats what we do too.
Have you used that technique on real people in real MOUT before?

I would sure hate to have to find out that there were innocents in that room, even though we're supposed to peep first... hmmmmm....
dimbulb is offline  
Old 08-06-2003, 05:04 PM   #15 (permalink)
Riiiiight........
 
the M16 is a relatively reliable weapons. Dust/Dirt doesn't do all that much to it, especially if you clean it regularly.
It did have issues when it was first issued in Vietnam. Troops took the term "self-cleaning" too literally, and didnt maintain their weapons as well. Plus, there was also the well known issue of inferior cartridge propellant, which caused excessive fouling of the weapon.

I find that most of my stoppages in M16s occur due to faulty magazines. Change the faulty magazine, and the stoppages magically disappear as well.....
dimbulb is offline  
Old 08-06-2003, 05:44 PM   #16 (permalink)
Psycho
 
Just wanted to thank you guys in the military. Not only do you have my utmost respect but my thanks for the info.
Exodus is offline  
Old 08-07-2003, 12:08 PM   #17 (permalink)
Upright
 
Location: On another plane of existence
The urban legend, left over from the Vietnam War, regarding the M-16, was generated by an embellishment of individual soldiers experiences by a press that was already beginning to turn on the administration.

I have heard many variations of the early problems of the switch over in systems. The disbursement of cleaning kits did not keep pace with the issuing of the new rifles. This was erroneously reported as the rifle being so well made that it did not need a cleaning kit, all one had to do was merely crack it open and pour water down the barrel. My uncle, who did 3 tours in Nam , (one as a Canadian soldier who then went south and joined the Marines) told me that where a lot of soldiers that tried to get the old M-14 back. Often they would try to claim the “poodle shooters” as battle losses, concocting incredible stories to cover their butts.

I was under the impression that rifle encountered problems because it was designed around a very clean burning propellant and that the uniquely chromed chamber wouldn't work well with lower grades of powder. Wasn’t there a congressional hearing into the switching of powder ingredients that implicated a US Governor? Wasn’t the forward assist button added to subsequent production runs in order to help the bolt properly feed and seat the round manufactured with the lower grade powder? I believe the rationale was that there had been millions of rounds made with the LG powder and that it would be more cost efficient to alter the production runs than to recall and replace the existing ammo stocks.

I have asked these questions on other forums and would appreciate any input from those in this thread with real life experience. During the GW3, I’ve seen many variations of the M4 and M16 A2. Some have different optical sights, camo patterns, forearm stocks w/wo pistol grips, flash suppressors, etc,etc. Does the individual soldier buy his own add-ons? Who decides which soldier gets the “bells and whistles” and who gets the plain issue?
__________________
si vis pacem, para bellum
kirk44 is offline  
Old 08-07-2003, 12:40 PM   #18 (permalink)
Gentlemen Farmer
 
j8ear's Avatar
 
Location: Middle of nowhere, Jersey
Quote:
Originally posted by kirk44
I was under the impression that rifle encountered problems because it was designed around a very clean burning propellant and that the uniquely chromed chamber wouldn't work well with lower grades of powder. Wasn’t there a congressional hearing into the switching of powder ingredients that implicated a US Governor? Wasn’t the forward assist button added to subsequent production runs in order to help the bolt properly feed and seat the round manufactured with the lower grade powder? I believe the rationale was that there had been millions of rounds made with the LG powder and that it would be more cost efficient to alter the production runs than to recall and replace the existing ammo stocks.
I believe they also added a coating to the chamber of some teflon type material that helped resist the caking of carbon.

The m4 is after my time...I trained and operated with an mp-5 and the meusoc m1911 back in the early 90's. Every member of a breeching team had an identical rig. One man in the team carried an mp-5sd (suppressed mp-5 which used subsonic rounds) and another complimented his gear with a 12guage. We had room for personalization but few variations were employed. We operated like we trained, and we trained with what we were provided, weapons wise.
j8ear is offline  
Old 08-07-2003, 01:33 PM   #19 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
Quote:
Originally posted by kirk44


I was under the impression that rifle encountered problems because it was designed around a very clean burning propellant and that the uniquely chromed chamber wouldn't work well with lower grades of powder. Wasn’t there a congressional hearing into the switching of powder ingredients that implicated a US Governor? Wasn’t the forward assist button added to subsequent production runs in order to help the bolt properly feed and seat the round manufactured with the lower grade powder? I believe the rationale was that there had been millions of rounds made with the LG powder and that it would be more cost efficient to alter the production runs than to recall and replace the existing ammo stocks.
The issue was not with the chromed barrels (all military barrels are still hard-chromed), but with the gas system fouling due to the use of the improper powder. If you want to know the specifics, buy "Black Rifle". A great book if you want the full story.
Quote:

I have asked these questions on other forums and would appreciate any input from those in this thread with real life experience. During the GW3, I’ve seen many variations of the M4 and M16 A2. Some have different optical sights, camo patterns, forearm stocks w/wo pistol grips, flash suppressors, etc,etc. Does the individual soldier buy his own add-ons? Who decides which soldier gets the “bells and whistles” and who gets the plain issue?
There are several different optics packages issued. The differing camo schemes and other "bells and whistles" are most likely on Special Forces weapons. Non-SF units still have to maintain uniformity.
__________________

Fortunato became immured to the sound of the trowel after a while.
debaser is offline  
Old 08-07-2003, 02:45 PM   #20 (permalink)
Upright
 
Location: On another plane of existence
Guys thanks for your replies and the excellent book link.Just a bit of clarification please. Do the soldiers have to buy their own packages or are they issued on a "reward " type system?
__________________
si vis pacem, para bellum
kirk44 is offline  
Old 08-07-2003, 03:02 PM   #21 (permalink)
Gentlemen Farmer
 
j8ear's Avatar
 
Location: Middle of nowhere, Jersey
Soldiers shouldn't need to "buy" anything. Marines have to buy their own uniforms...but everything else is provided from weapons to flak vests...That's not to say you can't buy additional stuff. Most of it is just nice to have, though. Essentials are issued. This includes all weapons attachments.

Not sure what you mean by 'rewards' type system, but if you mean for achievement or what not. No. It doesn't generally work that way. Can't speak for all branches of course. Just my beloved Corps....

-bear
__________________
It's alot easier to ask for forgiveness then it is to ask for permission.
j8ear is offline  
Old 08-07-2003, 04:05 PM   #22 (permalink)
Sir, I have a plan...
 
debaser's Avatar
 
Location: 38S NC20943324
Quote:
Originally posted by kirk44
Guys thanks for your replies and the excellent book link.Just a bit of clarification please. Do the soldiers have to buy their own packages or are they issued on a "reward " type system?
No, it is based on need, or in the spec-ops community, personal preference. Some commanders will allow their troops to accessorize their own weapons as long as they conform to Mil-spec, but most guys don't, seeing that even the cheapest mil-spec optics cost about $400. You can get accessories for the RIS (the foregrip, for example) fairly cheap.

Other than that everything is issued to you.

My only two consessions as far as modifications go is to have put a glare guard on mt Aimpoint, and I only use Orlite magazines (get them off a friend in Israel). Other than that I use what I am issued, but I sorta have too.
__________________

Fortunato became immured to the sound of the trowel after a while.
debaser is offline  
Old 08-07-2003, 04:50 PM   #23 (permalink)
Crazy
 
Does anyone know the difference between the OICW and the OC192 or whatever?
blackdas is offline  
Old 01-05-2006, 01:33 AM   #24 (permalink)
Upright
 
Quote:
Originally Posted by merkerguitars
but ak-47 can use their rounds.
well I used to think that was bs too but while I was working at the rifle company one day one of the dimmer witted employees there was given the job of test firing some ARs. He wound up loading 5.56 ammo into a 7.62X39 AR barrel and repeatedly dropping the bolt until it locked. Here's a similar result, pics supplied by another member on AR15.com:

artweaker is offline  
Old 01-05-2006, 12:16 PM   #25 (permalink)
Junkie
 
Location: bedford, tx
As a US Marine from 84-90, I used the A1 and A2. I liked both of them, they each had advantages and disadvantages but i'd have to say the A2 was probably a bit better. I have never had an opportunity to handle the M4 unfortunately.

I miss my A2.
__________________
"no amount of force can control a free man, a man whose mind is free. No, not the rack, not fission bombs, not anything. You cannot conquer a free man; the most you can do is kill him."
dksuddeth is offline  
Old 01-05-2006, 03:57 PM   #26 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
I'm not reading all that's been posted.

I'm just gonna throw in my two cents.


the M4 doesn't have enough barrel to get the 5.56 up to speed, al least up to enough speed for the bullet to act on its target as originally intended.

in short, the m4 lacks the lethality of its rifle counterparts.
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
Old 01-06-2006, 01:08 AM   #27 (permalink)
Twitterpated
 
Suave's Avatar
 
Location: My own little world (also Canada)
Quote:
Originally Posted by varus
Standard issue is now the M16A4. (an A2 with a rail system, i've seen rifles with A2 scratched out and A4 re-engraved) The Marines are evaluating a switch for the entire force to M4s.

My bet is they won't do it and they'll wait for the OICW, our new rifle based around the G36 and a 20mm grenade launcher.
OICW is dead at the moment (and even when it wasn't, it was at least 5 years before production started). If the M8 is still going forward, I imagine they'll go to that.
__________________
"Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions." - Albert Einstein

"Wise men talk because they have something to say; fools, because they have to say something." - Plato
Suave is offline  
Old 01-06-2006, 01:12 AM   #28 (permalink)
Twitterpated
 
Suave's Avatar
 
Location: My own little world (also Canada)
Quote:
Originally Posted by The_Dunedan
While the 5.56mm round is very accurate, it was not designed as a manstopper; it's more commondesignation is .223 Winchester, and it originated as a varmint-hunting round...it wasn't designed for use against human targets, but against prarie-dogs and coyotes.
I was under the impression that the 5.56mm NATO round was developed the same way as the 7.62mm NATO: as a standardized round for the militaries of Western European and North American countries.

Also, regarding the different attachments found on rifles, doesn't the regular army use designated marksmen? They'd have M16s fitted with better optics than the average soldier, and I imagine they get those "bells and whistles" for being better shots than their comrades.
__________________
"Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions." - Albert Einstein

"Wise men talk because they have something to say; fools, because they have to say something." - Plato

Last edited by Suave; 01-06-2006 at 01:17 AM..
Suave is offline  
Old 01-06-2006, 08:25 AM   #29 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
Suave is right, OICW is DEAD, it died with the XM8 project...

as for the more common designation being .223 winchester, winchester had nothing to do with the .223, remington did however.

and suave, the 7.62 came about in very different ways, we shoved the 7.62 down the rest of NATO's throats, and they shoved the 5.56 down ours. You have to remember, NATO was not exactly pleased with the changeover, we insisted on the 7.62 then abandoned it rather quickly.

It's not cheap to re-equip a whole army.
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
Old 01-06-2006, 11:40 AM   #30 (permalink)
Twitterpated
 
Suave's Avatar
 
Location: My own little world (also Canada)
Quote:
Originally Posted by ziadel
and suave, the 7.62 came about in very different ways, we shoved the 7.62 down the rest of NATO's throats, and they shoved the 5.56 down ours. You have to remember, NATO was not exactly pleased with the changeover, we insisted on the 7.62 then abandoned it rather quickly.
So basically what I was saying, except your version is a little more specific perhaps.
__________________
"Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions." - Albert Einstein

"Wise men talk because they have something to say; fools, because they have to say something." - Plato
Suave is offline  
Old 01-06-2006, 12:04 PM   #31 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
eh, mebbe your right...

I'll let you in on a little secret tho, I can't read, or write...

I'm just hitting random keys here
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
Old 01-06-2006, 01:04 PM   #32 (permalink)
Twitterpated
 
Suave's Avatar
 
Location: My own little world (also Canada)
ziadel: the human equivalent of 10 000 monkeys on 10 000 typewriters.
__________________
"Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions." - Albert Einstein

"Wise men talk because they have something to say; fools, because they have to say something." - Plato
Suave is offline  
Old 01-06-2006, 01:34 PM   #33 (permalink)
Comedian
 
BigBen's Avatar
 
Location: Use the search button
Energy equals one half mass times velocity squared;

Recite that equation 5 times before you go to bed at night.

What you want is a small bullet going very fucking fast. The 5.56 round does that, and does it well.

It wasn't designed to kill coyotes and gophers, it was designed to get the most energy on target using the laws of physics and the rule of "Spray and Pray" warfare:

Give your troops lots of lightweight bullets, and praise them mightily when they pull the trigger!

Having carried enough 5.56 and 7.62 rounds to qualify as a SME (subject matter expert) I can say that I prefer the 5.56... Of course you sniper benchrest guys will tear me apart on that one.

Yes, we outfit our good shots with some gucci kit.

I think that the carbine does its job extremely well, and the new age of combat (urban warfare) lends itself to choose the carbine as a better overall weapon.

When the time comes, I don't give a fuck, just make sure I am not walking into the situation with just my dick in my hand.
__________________
3.141592654
Hey, if you are impressed with my memorizing pi to 10 digits, you should see the size of my penis.

Last edited by BigBen; 01-06-2006 at 01:36 PM..
BigBen is offline  
Old 01-06-2006, 03:46 PM   #34 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
Quote:
Originally Posted by BigBen
Energy equals one half mass times velocity squared;

Recite that equation 5 times before you go to bed at night.

What you want is a small bullet going very fucking fast. The 5.56 round does that, and does it well.

It wasn't designed to kill coyotes and gophers, it was designed to get the most energy on target using the laws of physics and the rule of "Spray and Pray" warfare:

Give your troops lots of lightweight bullets, and praise them mightily when they pull the trigger!

Having carried enough 5.56 and 7.62 rounds to qualify as a SME (subject matter expert) I can say that I prefer the 5.56... Of course you sniper benchrest guys will tear me apart on that one.

Yes, we outfit our good shots with some gucci kit.

I think that the carbine does its job extremely well, and the new age of combat (urban warfare) lends itself to choose the carbine as a better overall weapon.

When the time comes, I don't give a fuck, just make sure I am not walking into the situation with just my dick in my hand.


I'm going to play devils advocate here.
the came about by remington from the .222, and people did'nt use the .222 to hunt big game, it was a varmint cartridge. Now, in the urban setting, resupply is easier, it's easier to load up ammo in a humvee and drive down the road to whoever needs it, so that negates one of the 5.56's points right there. I feel that the loss of barrel length on the carbines significantly reduces the killing power of the 5.56, without enough barrel, its not gonna get up to speed, and at that bullet weight, the only thing it has going for it is its speed. now, without that killing power, and being in close quarters, that means Apu will still have enough life left in him to pull that pin on that grenade thats on his belt before he expires.

That's gonna cause some problems..

The REAL choice here is to goto a bullpup format, lots o barrel, short overall length, keep the 5.56, give it the barrel it needs to get the velocity to kill properly, and all problems will be solved.


/has yet to talk to someone who has been in combat and liked the 5.56
//got a 45 minute discussion from my boss about how he just kept on keeping on with the m14 in 'nam
///personaly doesnt not own any .223 rifles because I am not a huge fan of the AR itself
////SLASHIES!
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
Old 01-06-2006, 09:03 PM   #35 (permalink)
Junkie
 
Carno's Avatar
 
The reason the M4 is less accurate is because of the barrel twist. It only has a 1:7 twist, which is not enough to stabilize the round before it leaves the barrel. The 1:7 twist is fine if you have a longer barrel, but the 14.5" barrel of the M4 is not enough.

A guy I know has an M4 that has a barrel twist of 1:9 and he says it is more accurate than the standard M16.

Of course that all depends on the type of ammo being used. Since standardization is king in the US military, the rounds they use are 62gr M855, which is fine for the M16, but less accurate for the M4 at range.

Some gucci spec ops guys are getting this kit, and I hear they all love that ACOG scope.



The company Barrett is actually making an "improved" M4 that is going to be of a higher caliber. Supposedly it will behave like the 7.62 rounds, but smaller/lighter. It's supposed to be 115 or 120gr I think.
Carno is offline  
Old 01-07-2006, 06:15 AM   #36 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
are you talking about the 6.8 SPC?


I really dont think we'll see that adopted anyitme soon...

but from what I understand, the pistol samples that the army has requested (they are replacing the M9) are .45 caliber...

mebbe we're abandoning the NATO standard and going our own way...
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
Old 01-07-2006, 10:36 AM   #37 (permalink)
Junkie
 
Carno's Avatar
 
Yeah, I think that's the one. It's 6.8mm.
Carno is offline  
Old 02-03-2006, 01:57 PM   #38 (permalink)
CMH
Upright
 
The M4 is a better rifle. There is very little real advantage to the M16 in "open spaces", and neither rifle is that great at long range shooting to begin with.
CMH is offline  
Old 02-03-2006, 02:49 PM   #39 (permalink)
Twitterpated
 
Suave's Avatar
 
Location: My own little world (also Canada)
Quote:
Originally Posted by BigBen
Energy equals one half mass times velocity squared;

Recite that equation 5 times before you go to bed at night.

What you want is a small bullet going very fucking fast. The 5.56 round does that, and does it well.
Only problem is that if you get the wrong combination of mass and speed, the bullet just shoots right through and doesn't dissipate enough energy into the target.
__________________
"Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions." - Albert Einstein

"Wise men talk because they have something to say; fools, because they have to say something." - Plato
Suave is offline  
Old 02-03-2006, 04:25 PM   #40 (permalink)
Myrmidon
 
ziadel's Avatar
 
Location: In the twilight and mist.
Quote:
Originally Posted by Suave
Only problem is that if you get the wrong combination of mass and speed, the bullet just shoots right through and doesn't dissipate enough energy into the target.

you can't have too much speed where the .223 is concerned, the problem is too little speed.

that round does its damage by fragmenting, not enough oomph, no fragmentation and it just zips through.
__________________
Ron Paul '08
Vote for Freedom
Go ahead and google Dr. Ron Paul. You'll like what you read.
ziadel is offline  
 

Tags
carbine, m16a2


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 10:48 AM.

Tilted Forum Project

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360