How hot is your box? - Tilted Forum Project Discussion Community

mrquackers · 03-11-2004, 08:03 PM

So quackers' has finally finished his gaming machine. Rah! Overclocking will come later - once I get a watercooling kit - but for now I just want to make sure everything stays reasonably cool. I've never really bothered getting a temperature reading in my other machines, since I never had the option, but this new box has internal temperature sensors.

Is there an average temp I should be striving to achieve (realizing that lower is better). Mid-30s? Mid-40s? Mid-50s? (Celcius, of course) Higher?

What's the current temp of your CPU?

Lasereth · 03-11-2004, 08:34 PM

Which processor do you have, which CPU heatsink fan are you using, and are you using thermal grease or a thermal pad?

-Lasereth

yakimushi · 03-11-2004, 08:38 PM

100% load for a few days (SETI) CPU is 123F. Case is 87F.

I've got an AthlonXP 2100+ running at 2.2GHz (which is 3200+ equivalent).

I've got an Alpha 8045 heatsink with a Sunon 80mm fan on it. On my northbridge I've got one of those gold Zalman noiseless heatsinks, works a hell of a lot better than that stock POS.

Redjake · 03-11-2004, 08:56 PM

That's a little hot, but nothing unusual for a CPU that is OCed (especially a 2100+). I wouldn't worry about it until it reaches 60 C (140 fahrenheit). If you want to cool it down some, just for shits and giggles, I suggest the Thermalright SLK-900 heatsink. And a nice 80 MM fan.

My Barton 2500+ is running at 45 C (about 113 fahrenheit), but my CPU fan is turned down to Low. If I crank it on High, I can get my CPU down to 32-35 Celcius.

I live in the mountains (on campus); provides for excellent "leave the window open in my room and over-clock" moments.

I OCed my Barton from 1.8 to 2.0 (not that much of an increase, but an increase nonetheless) and got the temperature down to 23 Celcius (73 Fahrenheit). My case temperature was 8 Celcius (46 Fahrenheit). Good times.

Zello · 03-11-2004, 09:11 PM

Idle CPU: 41C
Idle Case: 27C

Load it usually goes up to about 47C

Using Speeze "WhisperRock II" CPU Cooler with provided grease on AMD 2500 (no OC) in the NF7-S board.
Also the airflow in my case is bad so my temps are higher than I hoped for.

wraithhibn · 03-11-2004, 09:27 PM

I have a 1.33 Ghz T-bird with a Thermoengine and shitty paste. I run stock about 50-51C under load (SETI). My case temps run about 30-33C. I need to get a couple of fans, but my box is pretty quiet right now.

yakimushi · 03-11-2004, 09:39 PM

Heh, I remember the old days with TBirds! Even with my PAL8045 my 1.33 would roast... I then I OC'd it to 1.6GHz and it just baked... I had trouble keeping it below 145 at load.

Seems like these new P4 Prescotts are going to be challenging the heat record, wonder if those old TBirds can keep the crown...

ChrisJericho · 03-12-2004, 01:51 AM

My 2.4 C is usually around 24 celcius, when gaming it goes up about 10 degrees.

I have one of these Zalman coolers with artic silver 5.

http://www.newegg.com/app/ViewProduc...118-108&depa=0

mrquackers · 03-12-2004, 07:34 AM

Quote:

Originally posted by Lasereth
Which processor do you have, which CPU heatsink fan are you using, and are you using thermal grease or a thermal pad?

Runniing a P4 2.8c HT with the default heatsink fan. (That'll be upgraded eventually.) Thermal pad instead of grease at present.

It's running at about 34-36 now, which seems healthy enough. Should be able to drop that significantly once I install a decent heatsink and switch over to Artec silver.

Lasereth · 03-12-2004, 07:43 AM

34-36 are temps below what most people are looking for.

Your CPU is running damn cool! My Athlon XP 1900+ runs at 40-50 celsius with a Volcano 9+ and thermal grease.

-Lasereth

dnd · 03-12-2004, 10:00 AM

ok, so i'm running a crappy laptop which feels really hot after a few hours of use but hey, who really cares!

is there any program that can check ur cpu temp, i know theres prob not but just wondering. I've been through my bios and theres no indicators of temps so i never know.

kutulu · 03-12-2004, 10:38 AM

The highest my 2600XP runs at is about 58C. When idle, it will cool down to about 51-52. I was concerned about it at first, but I read around and it seemed that I shouldn't worry unless it starts going above 70C

Dilbert1234567 · 03-12-2004, 12:46 PM

current temp 33 C

air cooled

over clocked (133 > 150 FSB)

high load (brute forcing some passwords, and BT)

Paq · 03-13-2004, 12:07 PM

p4 2.8 with ht,
idles at 39c with retail heatsink/fan. Then again, that's being read by the abit IS7 mobo, which tends to overestimate the heat.

Embic · 03-13-2004, 03:49 PM

idle: 30c
full load: 38c

p4 2.6c @ 3.5 w slk900u and 92mm delta

VF19 · 03-13-2004, 03:56 PM

Idle: 36 c
During a game: 42 c
Athlon XP Barton 2500 @ 166 x 12 = 1.992 GHz (stock is 166 x 11) on a Volcano 8.

merlin · 03-13-2004, 05:12 PM

the stock intel hsfs are actually very nice and they are more than adequate for stock speeds, and even some oc'ing. my rule is never let your cpu go over 50C. i have 1.33ghz t-bird and Volcano 7+ (and generic thermal paste) on lowest fan setting and i get 38C idle and like 42C load in winter, and around 42C idle and 52C load in the summer. usually, i turn up my fan during the summer

oh, and for a new hsf, i would go with the sp-94 if you can afford it, otherwise the SLK-900 is nice. arctic ceramique or as5 are good thermal compounds. hope that helps

MrFlux · 03-14-2004, 01:21 AM

I hope my CPU temp probe is broken, coz it's reading at about 76 degrees C at the moment :P

Peryn · 03-15-2004, 03:59 PM

Im satisfied with my cooling i guess.

Athlon 64 3000+ with whatever fan and heatsink came with it. House temp was about 75F. Case temp usually right around 85 or so. @ idle, cpu temp is about 90F, highest i have ever seen was 110F, normal temp during heavy application under games and the like is about 103.

Tetanus · 03-16-2004, 10:42 PM

45c with a barton 2500+ OC'd to 3200 speeds.

EskimoDave · 03-16-2004, 11:18 PM

33ºC with a barton 2500+ OC'd to 3200 speeds.

Its 34.6ºC in my case right now.

If I had some intake or outtake fans on it would be lower. My CPU fan is turned down really low right now too.

Stargazer01 · 03-17-2004, 12:39 AM

The jump from the 2.8 to 3.0 Intel P4 (Northwood) is incredible, they must have modified the core on the initial runs.

3.0Ghz P4 w/ SwiftTech MCX-478V w/ ThermTake 92MM Fan @ 2500RPM

Idle 34C
Case 28C

Load (2X SETI@Home Clients)

CPU 44C
Case 30C

KUGR · 03-17-2004, 02:37 AM

100% CPU all the time

Chip is a Barton 2500+ @ 3200+

CPU Temp is 41C (105F)
Case Temp is 24C (75F)

My HSF is a Coolermaster Aero 7+ and it is running at just under full speed (3200RPM, max is 3500)
http://www.coolermasterusa.com/Product.aspx?ID=50

aarchaon · 03-17-2004, 07:15 PM

Barton 2500+ running at 2.21gHz (3200+ equivalent)

Temperature

CPU 52C
Motherboard 28C

Using a Thermaltake Silent Boost and X-Blower fan kit.

03-11-2004, 08:03 PM	#1 (permalink)
mrquackers Exhausted Location: Northeastern US - please send help!	How hot is your box? So quackers' has finally finished his gaming machine. Rah! Overclocking will come later - once I get a watercooling kit - but for now I just want to make sure everything stays reasonably cool. I've never really bothered getting a temperature reading in my other machines, since I never had the option, but this new box has internal temperature sensors. Is there an average temp I should be striving to achieve (realizing that lower is better). Mid-30s? Mid-40s? Mid-50s? (Celcius, of course) Higher? What's the current temp of your CPU? __________________ "If you're walking on thin ice, you may as well go ahead and dance."

03-11-2004, 08:34 PM	#2 (permalink)
Lasereth Knight of the Old Republic Location: Winston-Salem, NC	Which processor do you have, which CPU heatsink fan are you using, and are you using thermal grease or a thermal pad? -Lasereth __________________ "A Darwinian attacks his theory, seeking to find flaws. An ID believer defends his theory, seeking to conceal flaws." -Roger Ebert

03-11-2004, 08:38 PM	#3 (permalink)
yakimushi Addict	100% load for a few days (SETI) CPU is 123F. Case is 87F. I've got an AthlonXP 2100+ running at 2.2GHz (which is 3200+ equivalent). I've got an Alpha 8045 heatsink with a Sunon 80mm fan on it. On my northbridge I've got one of those gold Zalman noiseless heatsinks, works a hell of a lot better than that stock POS. Last edited by yakimushi; 03-11-2004 at 08:40 PM..

03-11-2004, 08:56 PM	#4 (permalink)
Redjake I'm a family man - I run a family business. Location: Wilson, NC	That's a little hot, but nothing unusual for a CPU that is OCed (especially a 2100+). I wouldn't worry about it until it reaches 60 C (140 fahrenheit). If you want to cool it down some, just for shits and giggles, I suggest the Thermalright SLK-900 heatsink. And a nice 80 MM fan. My Barton 2500+ is running at 45 C (about 113 fahrenheit), but my CPU fan is turned down to Low. If I crank it on High, I can get my CPU down to 32-35 Celcius. I live in the mountains (on campus); provides for excellent "leave the window open in my room and over-clock" moments. I OCed my Barton from 1.8 to 2.0 (not that much of an increase, but an increase nonetheless) and got the temperature down to 23 Celcius (73 Fahrenheit). My case temperature was 8 Celcius (46 Fahrenheit). Good times. __________________ Off the record, on the q.t., and very hush-hush.

03-11-2004, 09:11 PM	#5 (permalink)
Zello Crazy Location: Vincennes, IN	Idle CPU: 41C Idle Case: 27C Load it usually goes up to about 47C Using Speeze "WhisperRock II" CPU Cooler with provided grease on AMD 2500 (no OC) in the NF7-S board. Also the airflow in my case is bad so my temps are higher than I hoped for. __________________ Sorry, you can not add yourself to your own list.

03-11-2004, 09:27 PM	#6 (permalink)
wraithhibn Dopefish Location: the 'Ville	I have a 1.33 Ghz T-bird with a Thermoengine and shitty paste. I run stock about 50-51C under load (SETI). My case temps run about 30-33C. I need to get a couple of fans, but my box is pretty quiet right now. __________________ If you won't dress like the Victoria Secret girls, don't expect us to act like soap opera guys.

03-11-2004, 09:39 PM	#7 (permalink)
yakimushi Addict	Heh, I remember the old days with TBirds! Even with my PAL8045 my 1.33 would roast... I then I OC'd it to 1.6GHz and it just baked... I had trouble keeping it below 145 at load. Seems like these new P4 Prescotts are going to be challenging the heat record, wonder if those old TBirds can keep the crown...

03-12-2004, 01:51 AM	#8 (permalink)
ChrisJericho eat more fruit Location: Seattle	My 2.4 C is usually around 24 celcius, when gaming it goes up about 10 degrees. I have one of these Zalman coolers with artic silver 5. http://www.newegg.com/app/ViewProduc...118-108&depa=0 __________________ "A casual stroll through the lunatic asylum shows us that faith proves nothing." - Friedrich Nietzsche

03-12-2004, 07:43 AM	#10 (permalink)
Lasereth Knight of the Old Republic Location: Winston-Salem, NC	34-36 are temps below what most people are looking for. Your CPU is running damn cool! My Athlon XP 1900+ runs at 40-50 celsius with a Volcano 9+ and thermal grease. -Lasereth __________________ "A Darwinian attacks his theory, seeking to find flaws. An ID believer defends his theory, seeking to conceal flaws." -Roger Ebert

03-12-2004, 10:00 AM	#11 (permalink)
dnd Psycho Location: London...no longer a student	ok, so i'm running a crappy laptop which feels really hot after a few hours of use but hey, who really cares! is there any program that can check ur cpu temp, i know theres prob not but just wondering. I've been through my bios and theres no indicators of temps so i never know. __________________ "Never underestimate a dumb question"-- Brandon Boyd

03-12-2004, 10:38 AM	#12 (permalink)
kutulu Junkie	The highest my 2600XP runs at is about 58C. When idle, it will cool down to about 51-52. I was concerned about it at first, but I read around and it seemed that I shouldn't worry unless it starts going above 70C

03-12-2004, 12:46 PM	#13 (permalink)
Dilbert1234567 Devils Cabana Boy Location: Central Coast CA	current temp 33 C air cooled over clocked (133 > 150 FSB) high load (brute forcing some passwords, and BT) __________________ Donate Blood! "Love is not finding the perfect person, but learning to see an imperfect person perfectly." -Sam Keen

03-13-2004, 12:07 PM	#14 (permalink)
Paq Junkie Location: South Carolina	p4 2.8 with ht, idles at 39c with retail heatsink/fan. Then again, that's being read by the abit IS7 mobo, which tends to overestimate the heat. __________________ Live. Chris

03-13-2004, 03:49 PM	#15 (permalink)
Embic Insane Location: Canada	idle: 30c full load: 38c p4 2.6c @ 3.5 w slk900u and 92mm delta

03-13-2004, 03:56 PM	#16 (permalink)
VF19 Banned Location: back to my old location	Idle: 36 c During a game: 42 c Athlon XP Barton 2500 @ 166 x 12 = 1.992 GHz (stock is 166 x 11) on a Volcano 8.

03-14-2004, 01:21 AM	#18 (permalink)
MrFlux Fluxing wildly... Location: Auckland, New Zealand	I hope my CPU temp probe is broken, coz it's reading at about 76 degrees C at the moment :P __________________ flux (n.) Medicine. The discharge of large quantities of fluid material from the body, especially the discharge of watery feces from the intestines.

03-13-2004, 05:12 PM	#17 (permalink)
merlin Tilted	the stock intel hsfs are actually very nice and they are more than adequate for stock speeds, and even some oc'ing. my rule is never let your cpu go over 50C. i have 1.33ghz t-bird and Volcano 7+ (and generic thermal paste) on lowest fan setting and i get 38C idle and like 42C load in winter, and around 42C idle and 52C load in the summer. usually, i turn up my fan during the summer oh, and for a new hsf, i would go with the sp-94 if you can afford it, otherwise the SLK-900 is nice. arctic ceramique or as5 are good thermal compounds. hope that helps

03-15-2004, 03:59 PM	#19 (permalink)
Peryn Junkie Location: San Diego, CA.	Im satisfied with my cooling i guess. Athlon 64 3000+ with whatever fan and heatsink came with it. House temp was about 75F. Case temp usually right around 85 or so. @ idle, cpu temp is about 90F, highest i have ever seen was 110F, normal temp during heavy application under games and the like is about 103. __________________ Dont cry kid, It's not your fault you suck.

03-16-2004, 10:42 PM	#20 (permalink)
Tetanus Upright	45c with a barton 2500+ OC'd to 3200 speeds.

03-16-2004, 11:18 PM	#21 (permalink)
EskimoDave Upright Location: Yukon, Canada	33ºC with a barton 2500+ OC'd to 3200 speeds. Its 34.6ºC in my case right now. If I had some intake or outtake fans on it would be lower. My CPU fan is turned down really low right now too.

03-17-2004, 12:39 AM	#22 (permalink)
Stargazer01 Tilted	The jump from the 2.8 to 3.0 Intel P4 (Northwood) is incredible, they must have modified the core on the initial runs. 3.0Ghz P4 w/ SwiftTech MCX-478V w/ ThermTake 92MM Fan @ 2500RPM Idle 34C Case 28C Load (2X SETI@Home Clients) CPU 44C Case 30C

03-17-2004, 02:37 AM	#23 (permalink)
KUGR Mushroom Location: West coast of michigan	100% CPU all the time Chip is a Barton 2500+ @ 3200+ CPU Temp is 41C (105F) Case Temp is 24C (75F) My HSF is a Coolermaster Aero 7+ and it is running at just under full speed (3200RPM, max is 3500) http://www.coolermasterusa.com/Product.aspx?ID=50 __________________ ------------------- Boof! -------------------

03-17-2004, 07:15 PM	#24 (permalink)
aarchaon Insane	Barton 2500+ running at 2.21gHz (3200+ equivalent) Temperature CPU 52C Motherboard 28C Using a Thermaltake Silent Boost and X-Blower fan kit. __________________ Green. Yellow. Blue.