11-24-2003, 05:03 PM | #1 (permalink) |
Poo-tee-weet?
Location: The Woodlands, TX
|
computer case to liqour cabinet
well since im staying in the dorms for thanksgiving... so i decided i would work on turning the old junker gateway pentium 120 i got from a friend into a liquor cabinet...
I already pulled it all apart and pulled all the parts off it... heres the bare skeleton and another shot of it the single piece cover and the front bezel the single piece cover... needs a good cleaning... front bezel im thinking the hard stuff on the bottom and the beer on the top... Im planning on hinging the 5.25 drive bays for beer access... and the whole front to get to everything... im debating about whether i should try to cut the side piece to have that liftable...
__________________
-=JStrider=- ~Clatto Verata Nicto |
11-24-2003, 06:41 PM | #6 (permalink) | |
Loves my girl in thongs
Location: North of Mexico, South of Canada
|
Quote:
__________________
Seen on an employer evaluation: "The wheel is turning but the hamsters dead" ____________________________ Is arch13 really a porn diety ? find out after the film at 11. -Nanofever |
|
11-25-2003, 06:56 AM | #10 (permalink) |
beauty in the breakdown
Location: Chapel Hill, NC
|
Thats a really good idea. I just finished hiding my beer since they search the rooms for fire hazards over break. No one would think to look inside a computer case...
__________________
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." --Plato |
11-25-2003, 08:41 AM | #11 (permalink) |
Poo-tee-weet?
Location: The Woodlands, TX
|
Happymaan:i was thinking about how i could make it refrigerated... would have to find an airchiller... and some insulation...
Mr.Deflok: the power supply got stripped out of it before i got it... might try to salvage one from a junkyard tho... sailor420:yup... i hate living in the dorms...
__________________
-=JStrider=- ~Clatto Verata Nicto |
11-25-2003, 11:32 PM | #15 (permalink) | |
Tilted
|
Quote:
Infact... A LINK! To a Guiness Cooling Device http://www.stud.ntnu.no/~arnesen/peltierbeer/index.html Goooood stufff 7.2c guiness = goooooooooooooood |
|
11-25-2003, 11:58 PM | #16 (permalink) |
Poo-tee-weet?
Location: The Woodlands, TX
|
i could see something done with peltiers... and a heatsink on each side...
shrug... if anyone has some extra peltiers and whatnot just sitting around that you want to send me lemme know...
__________________
-=JStrider=- ~Clatto Verata Nicto |
11-26-2003, 11:03 AM | #19 (permalink) |
Poo-tee-weet?
Location: The Woodlands, TX
|
what am i gonna do thats gonna start a fire... it doesnt even have a power supply... and dont really have plans to add one... unless i can get a freebee somewhere...
my dremel came with a drill bit and it just happened to be pretty much the exact size i needed so i used that to get the rivits taken care of... i took out the motherboard tray... i test fitted a couple liqour bottles a sky vodka(ooopretty blue), a bicardi O , and a margarita mix bottle... the margarita mix bottle was the tallest and it fit with just a little room to spare... i dont have any longneck beer bottle to test fit... ill have to remedy that ... anybody know how tall a bottle is?
__________________
-=JStrider=- ~Clatto Verata Nicto Last edited by JStrider; 11-26-2003 at 11:21 AM.. |
Tags |
cabinet, case, computer, liqour |
|
|