What are these called? - Tilted Forum Project Discussion Community

The_Dude · 04-23-2003, 01:28 PM

I've posted about this before, for screws for the fans, but I was talking about these.

I got these from my teacher and I need some more of these suckers.

Anyone know what they are called?

Link to huge fucking picture

It's called to fucking big for image. use links next time, or photoshop. -juan

jujueye · 04-23-2003, 01:43 PM

they're called "GEEZUS THATS A HUGE PICTURE!!!"

Just kidding. Hmmm...like the others who have looked at this post and left scratching their head, I guess I dont know either. I do know you'll have far better luck finding these at an auto parts store than you will at a computer store. Try a few online customizing places for computers, and you'll most likely find that they are not really a computer part.

So the next question is: what are you doing with these? For the most part, if we can figure out what you're doing, we can come up with...something else!

duckduck · 04-23-2003, 03:55 PM

Um, some of us 56k guys need to taken into consideration, eh. It looks similar to a concrete screw. Hole is drilled in concrete, bottom piece punched in, then screwed screwed in. The screw expands the bottom piece so that it fits into the concrete even tighter. Though, your's looks "light duty" like it's used in wood (?) or something else like that.

Seriously, you need to resize the pic.

The_Dude · 04-23-2003, 06:26 PM

well, it's plastic.

and it can hold up fans.

you push it in from the back and the center part goes in and basically locks it in place.

u push the center thing to push the thing out.

i need the name for this deal.

blkdmnd · 04-23-2003, 06:34 PM

Looks like a 'brad' or maybe a 'rivet'. Anchor? I know it's a fastener, just don't know the exact term for this one.

The_Dude · 04-23-2003, 06:41 PM

tried both at newegg, no hits

Destrox · 04-23-2003, 06:48 PM

just looks like a every day plug

snaps into place after pushed beyond the little point, and i bet its a bitch to get out.

just goto your local hardware or plumber shop.

heyal256 · 04-23-2003, 06:57 PM

Umm, that is what is usually called a doohickey or a thingamabobber.... :P. Actually I have no idea either but seeing it reminds me of the popup timer on a turkey for some reason.

Seriously tho, i would guess that it's some type of a push in bolt/fastener.

laconic1 · 04-23-2003, 07:18 PM

Definitely check out the fasteners aisle at an auto parts store. I dont know if they will have anything small enough for a case fan if thats what you need it for, but I would scrounge around there and see if there is anything comparable. Oh, and please resize or trim the pic.

The_Dude · 04-23-2003, 07:39 PM

lol, sorry about the size.

i got a pretty high dpi, but i didnt think it would be that huge

portwineboy · 04-23-2003, 08:07 PM

Take it to Home Depot and find some retired craftsman who is working there to pass the time. I've yet to stump one of them, or at least not have them know someone who gave me the answer right away.

jujueye · 04-23-2003, 08:55 PM

oh...Dude...when you DO find out the technical name...please be a gent and TELL US what the proper name is. I'm gonna go crazy!

longjohns · 04-23-2003, 11:02 PM

hehe. you weren't kidding about that pic. photoshop is your friend! ;-)

japzster · 04-24-2003, 12:18 AM

looks like a plastic rivet or push-lock (that's what i call 'em)
also heard 'em called "reataining caps"

http://www.plastic-fastener.com/catalog/001.php

http://www.globalplastics.co.uk/main.htm
(click rivets, there's 3 types one looks close...)
hope that helps

fhqwhgads · 04-24-2003, 12:26 AM

Looks like a sound isolator rivet:

http://www.plastic-fastener.com/catalog/007.php

If that's not it, just go to www.plastic-fastener.com and look around a bit 'till you find something that works.

edit: bah...looks like japzster beat me by 8 minutes. good job.

Crazboos · 04-24-2003, 12:27 AM

They look like the fasteners used to keep my Hondas bumper attached to the car.

- OR -

The thing you use to get your girl to have that multiple orgasm.

Reese · 04-24-2003, 01:25 AM

I have a few of these. Some of the names I've heard them called are Removable rivets, Plastic Rivets, Push locks, plastic pop rivets etc etc depending on the brand. Check the hardware store first then automotive shops, they may have some or be able to order then for you.

http://pcmods.com/details.asp?ProdID=391

The are currently on backorder. Other mod retailers may have them in stock.

chodarama · 04-24-2003, 09:43 AM

They are called standoffs.

edit: nevermind

Magpie0001 · 04-24-2003, 01:26 PM

I used to work in Dell, In Dell the streets are paved with those things, so ill send a mail & ask someone tonight.

The_Dude · 04-24-2003, 02:14 PM

thanx everyone!

BoCo · 04-24-2003, 05:42 PM

I have those on my Lian-Li. I think you get find them at Directron and PCMods.com. I actually prefer fan screws to those damn things because they're a major pain in the ass to get off again.

04-23-2003, 01:28 PM	#1 (permalink)
The_Dude The GrandDaddy of them all! Location: Austin, TX	What are these called? I've posted about this before, for screws for the fans, but I was talking about these. I got these from my teacher and I need some more of these suckers. Anyone know what they are called? Link to huge fucking picture It's called to fucking big for image. use links next time, or photoshop. -juan __________________ "Luck is what happens when preparation meets opportunity." - Darrel K Royal Last edited by juanvaldes; 04-23-2003 at 07:24 PM..

04-23-2003, 03:55 PM	#3 (permalink)
duckduck Psycho Location: Where hockey pucks run rampant	Um, some of us 56k guys need to taken into consideration, eh. It looks similar to a concrete screw. Hole is drilled in concrete, bottom piece punched in, then screwed screwed in. The screw expands the bottom piece so that it fits into the concrete even tighter. Though, your's looks "light duty" like it's used in wood (?) or something else like that. Seriously, you need to resize the pic. __________________ Lead me, follow me, or get out of my way!

04-23-2003, 06:26 PM	#4 (permalink)
The_Dude The GrandDaddy of them all! Location: Austin, TX	well, it's plastic. and it can hold up fans. you push it in from the back and the center part goes in and basically locks it in place. u push the center thing to push the thing out. i need the name for this deal. __________________ "Luck is what happens when preparation meets opportunity." - Darrel K Royal

04-23-2003, 06:34 PM	#5 (permalink)
blkdmnd Addict	Looks like a 'brad' or maybe a 'rivet'. Anchor? I know it's a fastener, just don't know the exact term for this one. __________________ I blow my nose at you. Now go away before I taunt you a second time.

04-23-2003, 06:41 PM	#6 (permalink)
The_Dude The GrandDaddy of them all! Location: Austin, TX	tried both at newegg, no hits __________________ "Luck is what happens when preparation meets opportunity." - Darrel K Royal

04-23-2003, 01:43 PM	#2 (permalink)
jujueye alpaca lunch for the trip Location: in my computer	they're called "GEEZUS THATS A HUGE PICTURE!!!" Just kidding. Hmmm...like the others who have looked at this post and left scratching their head, I guess I dont know either. I do know you'll have far better luck finding these at an auto parts store than you will at a computer store. Try a few online customizing places for computers, and you'll most likely find that they are not really a computer part. So the next question is: what are you doing with these? For the most part, if we can figure out what you're doing, we can come up with...something else!

04-23-2003, 06:48 PM	#7 (permalink)
Destrox Metal and Rock 4 Life Location: Phoenix	just looks like a every day plug snaps into place after pushed beyond the little point, and i bet its a bitch to get out. just goto your local hardware or plumber shop. __________________ You bore me.... next.

04-23-2003, 06:57 PM	#8 (permalink)
heyal256 Not so great lurker Location: NY	Umm, that is what is usually called a doohickey or a thingamabobber.... :P. Actually I have no idea either but seeing it reminds me of the popup timer on a turkey for some reason. Seriously tho, i would guess that it's some type of a push in bolt/fastener.

04-23-2003, 07:18 PM	#9 (permalink)
laconic1 Junkie	Definitely check out the fasteners aisle at an auto parts store. I dont know if they will have anything small enough for a case fan if thats what you need it for, but I would scrounge around there and see if there is anything comparable. Oh, and please resize or trim the pic.

04-23-2003, 07:39 PM	#10 (permalink)
The_Dude The GrandDaddy of them all! Location: Austin, TX	lol, sorry about the size. i got a pretty high dpi, but i didnt think it would be that huge __________________ "Luck is what happens when preparation meets opportunity." - Darrel K Royal

04-23-2003, 08:07 PM	#11 (permalink)
portwineboy Master of No Domains Location: WEEhawken, New Joisey	Take it to Home Depot and find some retired craftsman who is working there to pass the time. I've yet to stump one of them, or at least not have them know someone who gave me the answer right away. __________________ If you can read this, thank a teacher. If you can read this in English, thank a veteran.

04-23-2003, 08:55 PM	#12 (permalink)
jujueye alpaca lunch for the trip Location: in my computer	oh...Dude...when you DO find out the technical name...please be a gent and TELL US what the proper name is. I'm gonna go crazy!

04-23-2003, 11:02 PM	#13 (permalink)
longjohns Insane	hehe. you weren't kidding about that pic. photoshop is your friend! ;-)

04-24-2003, 12:18 AM	#14 (permalink)
japzster Upright	looks like a plastic rivet or push-lock (that's what i call 'em) also heard 'em called "reataining caps" http://www.plastic-fastener.com/catalog/001.php http://www.globalplastics.co.uk/main.htm (click rivets, there's 3 types one looks close...) hope that helps

04-24-2003, 12:26 AM	#15 (permalink)
fhqwhgads Junkie	Looks like a sound isolator rivet: http://www.plastic-fastener.com/catalog/007.php If that's not it, just go to www.plastic-fastener.com and look around a bit 'till you find something that works. edit: bah...looks like japzster beat me by 8 minutes. good job. Last edited by fhqwhgads; 04-24-2003 at 12:28 AM..

04-24-2003, 12:27 AM	#16 (permalink)
Crazboos Psycho Location: Brooklyn, New York	They look like the fasteners used to keep my Hondas bumper attached to the car. - OR - The thing you use to get your girl to have that multiple orgasm. __________________ There's nothing like freezing time with the flash of a bulb.

04-24-2003, 01:25 AM	#17 (permalink)
Reese Delicious	I have a few of these. Some of the names I've heard them called are Removable rivets, Plastic Rivets, Push locks, plastic pop rivets etc etc depending on the brand. Check the hardware store first then automotive shops, they may have some or be able to order then for you. http://pcmods.com/details.asp?ProdID=391 The are currently on backorder. Other mod retailers may have them in stock. __________________ “It is better to be rich and healthy than poor and sick” - Dave Barry Last edited by Reese; 04-24-2003 at 01:37 AM..

04-24-2003, 09:43 AM	#18 (permalink)
chodarama Insane Location: a van, down by the river	They are called standoffs. edit: nevermind Last edited by chodarama; 04-24-2003 at 09:46 AM..

04-24-2003, 01:26 PM	#19 (permalink)
Magpie0001 Nobody Loves Me Location: Irish In Madrid	I used to work in Dell, In Dell the streets are paved with those things, so ill send a mail & ask someone tonight. __________________ Music is my first love & It will be my last.

04-24-2003, 02:14 PM	#20 (permalink)
The_Dude The GrandDaddy of them all! Location: Austin, TX	thanx everyone! __________________ "Luck is what happens when preparation meets opportunity." - Darrel K Royal

04-24-2003, 05:42 PM	#21 (permalink)
BoCo Fear the bunny Location: Hanging off the tip of the Right Wing	I have those on my Lian-Li. I think you get find them at Directron and PCMods.com. I actually prefer fan screws to those damn things because they're a major pain in the ass to get off again. __________________ Activism is a way for useless people to feel important.