Inline surge protector - Tilted Forum Project Discussion Community

Rekna · 03-08-2009, 07:38 PM

I am looking to plug my wall mounted TV into a surge protector. The power plug is on the wall behind the TV. I was hoping to find a fairly sleek looking inline surge protector and found this: https://powertraveller.com/iwantsome...ection/000096/. This looks like it fits the plug for my TV just fine which is rated at 10A 125V 1250W. Though I'm concerned because primary every place I see this gadget for sale is in Europe and I know their power is different there. I'm not very knowledgeable when it comes to electrical things so I want to make sure this won't fry my TV. The specifications same to be about the same:

* Working Voltage: 120VAC
* Maximum Current: 10 Amps
* Maximum Current Surge Handling: 2500 Amps
* Maximum Clamping: 900 V @ 2500 Amps (8/20s)
* Power Consumption: 0.6 Amps

Does anyone know if this is compatible with the US power system and our TV/computer plugs?

Thanks

RogueGypsy · 03-09-2009, 11:55 AM

Unless you have a TV built for the Europe, it won't work. The plug may look similar, but it is not.

Unfortunately, most of those smaller devices and cheap power strips do not work to protect your electronics. Most have a fuse or breaker inside that trips when a surge exceeds a set peak. The unfortunate part is, in order for the fuse to blow or the breaker to trip, the surge has to pass through it. Meaning it will hit your electronics. It will prevent any further hits, because the circuit is now broken, but the first one will get through.

Your best bet is to look at actual surge suppressors. They monitor voltage and frequency and either correct it before letting it pass (power conditioner) or activate a clamping circuit that will not allow it to pass. None of these devices that I've seen are small or discrete. But they are the only way to truly protect your electronics from spikes and surges. I like Panamax and Monster, I've had no problems with either and their warranty extends to you equipment. So if they fail, they will not only replace the suppression device, but all damaged equipment connected to it at the time of failure.

I would link you to a good list, but for some reason I can't post a link in this forum. So, go to PCWORLD online and search 'surge suppressor'. You should get a list of 100+ devices they have rated. It looks like they even have the style you are looking for.

...

03-08-2009, 07:38 PM	#1 (permalink)
Rekna Junkie	Inline surge protector I am looking to plug my wall mounted TV into a surge protector. The power plug is on the wall behind the TV. I was hoping to find a fairly sleek looking inline surge protector and found this: https://powertraveller.com/iwantsome...ection/000096/. This looks like it fits the plug for my TV just fine which is rated at 10A 125V 1250W. Though I'm concerned because primary every place I see this gadget for sale is in Europe and I know their power is different there. I'm not very knowledgeable when it comes to electrical things so I want to make sure this won't fry my TV. The specifications same to be about the same: * Working Voltage: 120VAC * Maximum Current: 10 Amps * Maximum Current Surge Handling: 2500 Amps * Maximum Clamping: 900 V @ 2500 Amps (8/20s) * Power Consumption: 0.6 Amps Does anyone know if this is compatible with the US power system and our TV/computer plugs? Thanks

03-09-2009, 11:55 AM	#2 (permalink)
RogueGypsy Insane Location: The Great NorthWet	Unless you have a TV built for the Europe, it won't work. The plug may look similar, but it is not. Unfortunately, most of those smaller devices and cheap power strips do not work to protect your electronics. Most have a fuse or breaker inside that trips when a surge exceeds a set peak. The unfortunate part is, in order for the fuse to blow or the breaker to trip, the surge has to pass through it. Meaning it will hit your electronics. It will prevent any further hits, because the circuit is now broken, but the first one will get through. Your best bet is to look at actual surge suppressors. They monitor voltage and frequency and either correct it before letting it pass (power conditioner) or activate a clamping circuit that will not allow it to pass. None of these devices that I've seen are small or discrete. But they are the only way to truly protect your electronics from spikes and surges. I like Panamax and Monster, I've had no problems with either and their warranty extends to you equipment. So if they fail, they will not only replace the suppression device, but all damaged equipment connected to it at the time of failure. I would link you to a good list, but for some reason I can't post a link in this forum. So, go to PCWORLD online and search 'surge suppressor'. You should get a list of 100+ devices they have rated. It looks like they even have the style you are looking for. ... __________________ Methods, application and intensity of application vary by the individual. All legal wavers must be signed before 'treatment' begins. Self 'Medicating' is not recommend. However, if necessary, it is best to have an 'assistant' or 'soft landing zone' nearby. Any and all legal issues resulting from improperly applied techniques should be forwarded to: Dewy, Cheatum & Howe, Intercourse, PA 17534. Attn: Anonymous.