Intel find socket of chip - Tilted Forum Project Discussion Community

wayne21 · 10-01-2007, 05:51 AM

I have a couple of Intel PROCESSOR and I do not know what chip set they are?
THESE WERE PULLED FROM WORKING COMPUTERS AND GIVEN TO ME. I'M GOING TO BUILD A FIRST COMPUTER FOR MY DAUGHTER, JUST FOR HOMEWORK.
One has
PENTIUM 4 1.8GHZ/256/400/1.75
SL5VJ COSTA RICA 3214A157-1417 INTEL M C'01
THE M C ARE IN A CIRCLE ///
I WANT TO BUY A MOTHERBOARD FOR ONE OF THEM BUT IS IT 423 PIN OR 478 PIN?
The other one is the same pinset just has 1.60 /256/400/1.75
SL5VH COSTA RICA
3209A048-00207

CAN ANYONE TELL ME HOW TO TELL THE PIN SET?
THANK YOU ALL FOR YOUR HELP. TFP IS GREAT!
BAFFLED WAYNE21
THANKS AGAIN

Lasereth · 10-01-2007, 02:30 PM

Can you measure the processor length and width and post it here in inches?

BTW it's gonna be really expensive to build a computer with CPUs that old. You will spend a fortune finding ram and a motherboard, etc. to make that work unless you have it laying around already.

wayne21 · 10-02-2007, 07:59 AM

The chip size is 1 3/8" or 35mm. I have a lot of ram 168 pin around so i would just need a motherboard.
Thanks again.
Wayne21

Dilbert1234567 · 10-02-2007, 08:33 AM

left is 423, right is 478

wayne21 · 10-02-2007, 10:24 AM

thank you Dilbert and Lasereth it is the 478 chip set. Thanks again!
Wayne21

Lasereth · 10-02-2007, 01:48 PM

Yep those measurements check out perfectly. Good luck!!

10-01-2007, 05:51 AM	#1 (permalink)
wayne21 Crazy Location: florida	Intel find socket of chip I have a couple of Intel PROCESSOR and I do not know what chip set they are? THESE WERE PULLED FROM WORKING COMPUTERS AND GIVEN TO ME. I'M GOING TO BUILD A FIRST COMPUTER FOR MY DAUGHTER, JUST FOR HOMEWORK. One has PENTIUM 4 1.8GHZ/256/400/1.75 SL5VJ COSTA RICA 3214A157-1417 INTEL M C'01 THE M C ARE IN A CIRCLE /// I WANT TO BUY A MOTHERBOARD FOR ONE OF THEM BUT IS IT 423 PIN OR 478 PIN? The other one is the same pinset just has 1.60 /256/400/1.75 SL5VH COSTA RICA 3209A048-00207 CAN ANYONE TELL ME HOW TO TELL THE PIN SET? THANK YOU ALL FOR YOUR HELP. TFP IS GREAT! BAFFLED WAYNE21 THANKS AGAIN

10-01-2007, 02:30 PM	#2 (permalink)
Lasereth Knight of the Old Republic Location: Winston-Salem, NC	Can you measure the processor length and width and post it here in inches? BTW it's gonna be really expensive to build a computer with CPUs that old. You will spend a fortune finding ram and a motherboard, etc. to make that work unless you have it laying around already. Last edited by Lasereth; 10-01-2007 at 02:31 PM.. Reason: Automerged Doublepost

10-02-2007, 08:33 AM	#4 (permalink)
Dilbert1234567 Devils Cabana Boy Location: Central Coast CA	left is 423, right is 478 __________________ Donate Blood! "Love is not finding the perfect person, but learning to see an imperfect person perfectly." -Sam Keen

10-02-2007, 07:59 AM	#3 (permalink)
wayne21 Crazy Location: florida	The chip size is 1 3/8" or 35mm. I have a lot of ram 168 pin around so i would just need a motherboard. Thanks again. Wayne21

10-02-2007, 10:24 AM	#5 (permalink)
wayne21 Crazy Location: florida	thank you Dilbert and Lasereth it is the 478 chip set. Thanks again! Wayne21

10-02-2007, 01:48 PM	#6 (permalink)
Lasereth Knight of the Old Republic Location: Winston-Salem, NC	Yep those measurements check out perfectly. Good luck!!