Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Motors (https://thetfp.com/tfp/tilted-motors/)
-   -   intake for an AT (https://thetfp.com/tfp/tilted-motors/73853-intake.html)

albazeroex 10-25-2004 10:58 PM

intake for an AT
 
i have a 04 accord AT 4cyl and i want to get intake for it;; -_- of course im having a hard time looking for one;; i've only been running into aem MT intakes... holes in my research for intake :hmm:

does anyone know where i can get one?

animal909 10-25-2004 11:41 PM

you can ghetto fab one up... get a bunch of abs pipes from home depot and aluminum tape to insulate the cold air... worked for me and my maxima and will prolly cost you $50 with a cheap cone intake.

jamessh1 10-26-2004 06:56 AM

have you checked ebay yet? It is normally easy to find intakes for all models of cars and trannys, even if it's just a generic (no name) CAI. normally AEM puts out intake's for both MT and AT, as do Injen and Weapon R. I've had AEM and weapon R intakes in my vehicles and both performed very well.

albazeroex 10-26-2004 08:53 AM

for all the aem 04 4cyls i found were all for MT T_T;; im still researching on ebay tho;; thanks for the feedback

1slOwCD8 10-26-2004 01:05 PM

Yea, i kinda have the same problem. I have a 95 V6 accord and since there arent that many, they mostly have only 4cly intakes. it sucks, i still dont have one, im prolly just going to make my own with a k&n filter.
Anyway, i found some intakes for your AT 04 Accord.
A little pricey, but it doesnt say MT only
Here are some intakes, doesnt say MT only either

telekinetic 10-26-2004 01:24 PM

What part of the intake is MT or AT only? I don't see why you'd need a special AT intake...transmission selection shouldn't change anything associated with the intake.

albazeroex 10-26-2004 01:53 PM

well for the 04's i think the MT is a lev and the AT is a sulev;; isnt there a difference? the injen ones that i found said lev only;; something about needing something for sulev

aem intake said '03-04 Honda Accord 4Cyl (except 4Dr AT w/MAF)'

ebay one

1slOwCD8 10-26-2004 02:34 PM

I wondered why AT or MT made a difference for the intake also, but now i kinda just figured that with the different transmissions, things in the engine bay would be placed differently, so an AT intake pipe wouldnt have room in a MT engine bay. Im just guessing.

albazeroex 10-26-2004 03:32 PM

yea;; i was thinking the same thing too;; since AT and MT look different under the hood


All times are GMT -8. The time now is 02:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360