Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Knowledge and How-To (https://thetfp.com/tfp/tilted-knowledge-how/)
-   -   Checking The CV Joint (https://thetfp.com/tfp/tilted-knowledge-how/13367-checking-cv-joint.html)

kurty[B] 06-24-2003 09:52 PM

Checking The CV Joint
 
So, sometimes when I apply pressure to the gas, or release pressure rapidly from the gas of my car I hear a fairly loud *clunk* from the front of my car. This is actually when I have it in gear, if the car is in neutral it doesn't make any noise (the car is a manual transmission). Sometimes when turning to the left and barely accelerating it makes a consistent "clunk clunk clunk".

About two years ago I noticed I had a torn CV boot. I probably drove around for another three months before I got around to replacing the boot. Not sure how long before it had torn, could have been a couple months. I simply replaced the CV boot. So now, the CV boot and everything under the car appears to look proper, no leaks of any sort. Is there a way for me to check to see if the CV Joint has gone bad without pulling apart the boot? Or by the clunking noise is it a given that the Joint is bad?

Currently I'm leaning towards simply going and replacing the CV Joint.

Ashton 06-25-2003 01:40 AM

The CV joint is packed with grease that is held in by the CV boot..... when the CV boot is cracked or torn the centrifugal force throws the grease out of the boot and the CV joint runs dry until it wears out...... that's the clunking sound you hear, usually it's when you are going around a corner at low speed..... It's a common problem with front wheel drive cars, all you can do is replace the CV joint and keep a eye on the boot..... since it is new you won't have to worry about it for awhile but it's always a good idea to keep a eye on it. Next time you see a old front wheel drive car turn a corner, listen for the Clack Clack Clack, and you will know whats wrong with it.

perkins 06-25-2003 07:29 PM

yeah I'd go ahead and replace the cv joint with the torn boot. Let us know if you need help with that.

kurty[B] 06-26-2003 06:35 AM

there is currently no torn boot (I replaced the boot two years ago). The boots are fine, but there is a clunking noise. I know how to replace the boot and the cv joint it's just one of the least favorite things I like to do on a car.

boredjerk 06-26-2003 09:31 PM

If it's clunking when you turn it's bad. But you can drive around on 'em for a hell of a long time before they fall out. Procrastinate for a while.

Tirian 06-27-2003 09:01 AM

Re: Checking The CV Joint
 
Quote:

Originally posted by kurty[B]
S Sometimes when turning to the left and barely accelerating it makes a consistent "clunk clunk clunk".

Is there a way for me to check to see if the CV Joint has gone bad without pulling apart the boot? Or by the clunking noise is it a given that the Joint is bad?
.

No need to check the joint... if it makes that sound when you turn it needs to be replaced. Your intuition was correct.

eaglek96 06-28-2003 06:55 AM

Driving around with a cracked boot for even a couple days can damage the boot. The grease spins out pretty quickly actually, and the CV joint won't work without that grease. Even if you put a new boot on, the damage has already been done. CV joints are fairly cheap now, except for the labor. If you want to tackle it yourself its not too bad if you know what you are doing.

Its ok to drive around with the clunking, but eventually you will notice the front end shaking at high speeds, and that shake eventually starts wearing out other parts, like the shafts and seals on the tranny, so I wouldn't wait forever if I were you. I can
t think of any way to check it, but as a rule of thumb, if it clunks, its bad.

tman17m 06-28-2003 11:06 AM

i just replaced both my half shafts in my toyota. its really not that bad to do. id recommend replacing the half shafts instead of just repacking it with grease and putting on a new boot. Once the grease has been let out of the joint and you hear the "clunk clunk" you have done unfixable damage to the cv joint.

not to bash on you eaglek, but just to set the record straight. is not a good idea at all to drive around on a broken cv joint. they can freeze up if they are let go too long. just like an engine without oil. if they freeze up and youre driving along...big trouble. also, they can actually break from the thermal stress induced by the fact that they are not properly lubercated. and if they break, well you wont be driving anywhere.

eaglek96 06-28-2003 07:31 PM

Quote:

Originally posted by tman17m
not to bash on you eaglek, but just to set the record straight. is not a good idea at all to drive around on a broken cv joint. they can freeze up if they are let go too long. just like an engine without oil. if they freeze up and youre driving along...big trouble. also, they can actually break from the thermal stress induced by the fact that they are not properly lubercated. and if they break, well you wont be driving anywhere.
No prob. Its not really a bash. As a rule of thumb, if there is something wrong with a car, fix it before more trouble comes.

kurty[B] 07-01-2003 10:17 PM

Thanks for the help guys. I was having trouble pinpointing which CV joint the clunking was coming from, but after taking the car up Pikes Peak for the International Hill Climb (I know very stupid very stupid) the noise got horribly worse, and it was obvious that the right joint was gone. So, I replaced it, and the majority of the noise has gone away, the driver's side is making a very slight clunking too though. Will probably replace that one before the end of the month. Thanks for the info, and opinions.

DEI37 07-08-2003 03:12 PM

CV joints won't clunk. They will click when turning. What you're describing sounds more like a ball joint, or a tie rod/tie rod end. I highly doubt that it's a CV joint, given the description you give. Unless the clunking you describe actually is a click, in which case you'd be right.
Also, you won't go anywhere on a broken CV joint. The car just won't go anywhere.

kurty[B] 07-08-2003 08:19 PM

I dunno, but I replaced the whole half-shaft on the right side, and the noise has gone. The inner CV joint was pretty much disintegrated... Not sure why, because the boot was still fully sealed, and there was plenty of grease (although old nasty grease) in there. I've replaced the whole suspension, springs, struts, ball joints, tie rod ends, and wheel bearings about a year ago, so I hope none of those things have gone bad already. Thanks for the input though.


All times are GMT -8. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360