Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Knowledge and How-To (https://thetfp.com/tfp/tilted-knowledge-how/)
-   -   Hot Water Heater Overflow Pipe (https://thetfp.com/tfp/tilted-knowledge-how/104112-hot-water-heater-overflow-pipe.html)

Derwood 05-02-2006 12:36 PM

Hot Water Heater Overflow Pipe
 
We have a pretty new (less than 2 years old) hot water heater. Every time someone takes a shower, washes dishes, etc., the tank refills (obviously) but the overflow pipe always ends up dripping. We put a container under the pipe and I would say we are dripping about a pint of water a day. Is this normal? Is there an adjustment that can be made to make it stop refilling before it overflows?

newtx 05-02-2006 01:17 PM

Try snugging up the shutoff valve on the overflow. If that doesn't stop the leak you may have to have a new washer. Be sure your overflow pipe is plumbed to the outside. I had an overflow valve blow on my water heater and it blows out steam and near boiling water. Very dangerous. Buy some pvc pipe and send it outdoors. If not corrected the dripping will get worse. (and it could be the popoff valve itself leaking)

cj2112 05-02-2006 04:13 PM

DO NOT try "snugging up the shutoff valve on the overflow" this is a temperature/pressure relief valve specifically designed to release if the pressure gets to high, not an "overflow valve". Try turning you're hot water heater down to between 120 to 140 degrees farenheit.

steveincolumbus 05-02-2006 06:42 PM

check water pressure in house, the valves are made to releave pressure at 150 lbs. If pressure when leaking is normal its the valve, if high, likely to be a one-way-valve or regulator in line preventing backflow, and then you would need a pressure tank of sorts to have a place to expand to.... sence water expands when heated

http://www.factsfacts.com/MyHomeRepa...sureRelief.htm

Derwood 05-03-2006 11:32 AM

Quote:

Originally Posted by steveincolumbus
check water pressure in house, the valves are made to releave pressure at 150 lbs. If pressure when leaking is normal its the valve, if high, likely to be a one-way-valve or regulator in line preventing backflow, and then you would need a pressure tank of sorts to have a place to expand to.... sence water expands when heated

http://www.factsfacts.com/MyHomeRepa...sureRelief.htm


Thanks, that's exactly what the pipe looks like. I'm not sure if i'm qualified to fix it myself, but at least I know what to tell a plumber.

newtx 05-03-2006 06:53 PM

My bad. cj2112 is correct. I don't know what I was thinking. But do plumb the overflow outside for safety.

Derwood 05-31-2006 08:01 PM

so it magically stopped overflowing. Or did it....

It may be a coincidence, but I recently fixed a toilet that shares it's plumbing with the washing machine and hot water heater (common wall). The toilet's water was turned off in the bathroom for several months while I put off fixing it. Seems that the water heater has stopped overflowing since I turned that shutoff back on. Could that be the case?

Charlatan 06-01-2006 04:37 AM

You might want to have it looked at. When mine started doing this it was because the dip tube inside the tank was broken.


All times are GMT -8. The time now is 08:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37