Painting the PS2? - Tilted Forum Project Discussion Community

Wingless · 01-01-2005, 10:29 AM

So I've been thinking about painting my PS2 game console. What kind of spray paint should I use? Should I use that Krylon primer-less plastic spray paint? Sanding required? Thanks!

Scorps · 01-01-2005, 06:49 PM

Sand it lighty first, and you might want to check if your local Home Depot to see if they got that new plastic spray paint. If not there is a paint that I can get from Canadian Tire(like Home Depot, just with car stuff) its for car interiors, works good also.

Church · 01-01-2005, 08:59 PM

Yeah, there's a spraypaint called Fusion that you can use. It's meant to fuse to plastic and I can vouch that it works really well. No sanding required. You can find it at any hardware store.

Scorps · 01-02-2005, 12:21 PM

Quote:

Originally Posted by Church

Yeah, there's a spraypaint called Fusion that you can use. It's meant to fuse to plastic and I can vouch that it works really well. No sanding required. You can find it at any hardware store.

But the PS2 has a weird glossy surface does it not?

Church · 01-02-2005, 10:38 PM

Quote:

Originally Posted by Pain Train

But the PS2 has a weird glossy surface does it not?

Doesn't matter. I've used it for my cheap plastic lawn chairs, television sets, computer cases. The cool stuff about this paint is that it doesn't matter what the surface is like. It basically causes a chemical reaction that melts a very fine layer of the first layer, and it melds in with the plastic. Cool stuff!

Scorps · 01-03-2005, 09:55 AM

Oh sweet I need to get me a can of that stuff....but I got nothing plastic to paint!

SteveMcFloyd · 01-03-2005, 08:10 PM

Quote:

Originally Posted by Pain Train

Oh sweet I need to get me a can of that stuff....but I got nothing plastic to paint!

Oh, take a look around, you'll find something

Wingless · 01-03-2005, 10:42 PM

Fusion, yeah, thats the stuff. I couldn't think of the name of it.

Now, does anyone know where I can find a tutorial or whatever regarding how to take apart the PS2? I don't want any plastic-melting paint stuffs to get inside and hurt the electronics or anything...

Scorps · 01-05-2005, 03:55 PM

Quote:

Originally Posted by Wingless

Fusion, yeah, thats the stuff. I couldn't think of the name of it.

Now, does anyone know where I can find a tutorial or whatever regarding how to take apart the PS2? I don't want any plastic-melting paint stuffs to get inside and hurt the electronics or anything...

Take it apart slowly........and try and remember how it goes bak together

animal909 · 01-05-2005, 06:09 PM

i think fusion has a primer... use that an dthen you can open up a number of possibilities with paint colors. you can even use automotive paint.

biznatch · 01-08-2005, 07:27 PM

post pics of the painted ps2, along with a instructional text...I really like the idea.

Scorps · 01-08-2005, 08:21 PM

I should paint my XBOX

it think it would look sweet bright yellow!

Rudel73 · 01-09-2005, 08:44 AM

get it professionaly done! If you dont mind spending 99 bucks at least

http://www.colorwarepc.com/content.aspx?id=29

biznatch · 01-09-2005, 11:30 AM

Quote:

Originally Posted by Rudel73

get it professionaly done! If you dont mind spending 99 bucks at least

http://www.colorwarepc.com/content.aspx?id=29

Those PS2s rock...but I do mind spending 100 hard earned bucks..
So can someone give a simple well detailed instructional on how to paint the ps2?
Cuz that would rock.

Wingless · 01-09-2005, 04:09 PM

Quote:

Originally Posted by Rudel73

get it professionaly done! If you dont mind spending 99 bucks at least

http://www.colorwarepc.com/content.aspx?id=29

I've seen plenty of professional painted PS2 systems online and on eBay, but at premium price... the point of this project is so I can do it myself, cheaper, and maybe even better...

(Isn't that the point of any DIY project?)

Irishsean · 01-09-2005, 07:25 PM

Why don't you just get a skin for it, much easier, no chance of messing up your box, and if you don't like it, you can take it off.

Rawrr · 01-09-2005, 09:17 PM

http://ps2-scene.org/

there is a forum on this website that may help you with PS2 Case and Controller modding (from LED's to Painting)

I think this site is up to par with the rules on this forum but I'm not sure..I've read over the rules and I don't think this site fits under warez but my views might be different than someone elses! So if this is not legal would a mod edit my post hehe..

biznatch · 01-10-2005, 03:46 PM

the forum is well done, but i've seen nothing on it yet that instructed on how to paint the ps2 myself...

Rawrr · 01-10-2005, 11:11 PM

hrm, doh! >_<

biznatch · 01-11-2005, 04:19 PM

Quote:

Originally Posted by Rawrr

hrm, doh! >_<

Um....that was for...?
I might not have checked every single section, but I have only seen on thread in it about painting it yourself and noone answered the guy's question.
Anyway this is turning into another forum conversation, so does anyone on this board know how to paint the ps2?

01-01-2005, 10:29 AM	#1 (permalink)
Wingless Psycho Location: Metro Detroit, Mich, USA	Painting the PS2? So I've been thinking about painting my PS2 game console. What kind of spray paint should I use? Should I use that Krylon primer-less plastic spray paint? Sanding required? Thanks! __________________ Tommy Nibs is a funny word. So here I am, above palm trees, so straight and tall... You are, smaller getting smaller, but I still see... you. Jimmy Eat World - Goodbye Sky Harbor

01-01-2005, 06:49 PM	#2 (permalink)
Scorps Lost!! Location: Kingston, Ontario	Sand it lighty first, and you might want to check if your local Home Depot to see if they got that new plastic spray paint. If not there is a paint that I can get from Canadian Tire(like Home Depot, just with car stuff) its for car interiors, works good also. __________________ A.K.A. PainTrain

01-01-2005, 08:59 PM	#3 (permalink)
Church Tilted F*ckhead Location: New Jersey	Yeah, there's a spraypaint called Fusion that you can use. It's meant to fuse to plastic and I can vouch that it works really well. No sanding required. You can find it at any hardware store. __________________ Through counter-intelligence, it should be possible to pinpoint potential trouble makers, and neutralize them.

01-03-2005, 09:55 AM	#6 (permalink)
Scorps Lost!! Location: Kingston, Ontario	Oh sweet I need to get me a can of that stuff....but I got nothing plastic to paint! __________________ A.K.A. PainTrain

01-03-2005, 10:42 PM	#8 (permalink)
Wingless Psycho Location: Metro Detroit, Mich, USA	Fusion, yeah, thats the stuff. I couldn't think of the name of it. Now, does anyone know where I can find a tutorial or whatever regarding how to take apart the PS2? I don't want any plastic-melting paint stuffs to get inside and hurt the electronics or anything... __________________ Tommy Nibs is a funny word. So here I am, above palm trees, so straight and tall... You are, smaller getting smaller, but I still see... you. Jimmy Eat World - Goodbye Sky Harbor

01-05-2005, 06:09 PM	#10 (permalink)
animal909 Crazy	i think fusion has a primer... use that an dthen you can open up a number of possibilities with paint colors. you can even use automotive paint.

01-08-2005, 07:27 PM	#11 (permalink)
biznatch Junkie Location: France	post pics of the painted ps2, along with a instructional text...I really like the idea. __________________ Check it out: The Open Source/Freeware/Gratis Software Thread

01-08-2005, 08:21 PM	#12 (permalink)
Scorps Lost!! Location: Kingston, Ontario	I should paint my XBOX it think it would look sweet bright yellow!

01-09-2005, 08:44 AM	#13 (permalink)
Rudel73 Psycho	get it professionaly done! If you dont mind spending 99 bucks at least http://www.colorwarepc.com/content.aspx?id=29

01-09-2005, 07:25 PM	#16 (permalink)
Irishsean edited for content Location: Austin, TX	Why don't you just get a skin for it, much easier, no chance of messing up your box, and if you don't like it, you can take it off. __________________ There are no absolute rules of conduct, either in peace or war. Everything depends on circumstances. Leon Trotsky

01-09-2005, 09:17 PM	#17 (permalink)
Rawrr Insane Location: Virginia	http://ps2-scene.org/ there is a forum on this website that may help you with PS2 Case and Controller modding (from LED's to Painting) I think this site is up to par with the rules on this forum but I'm not sure..I've read over the rules and I don't think this site fits under warez but my views might be different than someone elses! So if this is not legal would a mod edit my post hehe.. __________________ This revelation is the death of ignorance tangled in a state of suffocation slave to self righteousness damnation is on your lips

01-10-2005, 03:46 PM	#18 (permalink)
biznatch Junkie Location: France	the forum is well done, but i've seen nothing on it yet that instructed on how to paint the ps2 myself... __________________ Check it out: The Open Source/Freeware/Gratis Software Thread

01-10-2005, 11:11 PM	#19 (permalink)
Rawrr Insane Location: Virginia	hrm, doh! >_< __________________ This revelation is the death of ignorance tangled in a state of suffocation slave to self righteousness damnation is on your lips