Win ME to Win XP network - Tilted Forum Project Discussion Community

MexicanOnABike · 08-11-2005, 07:55 PM

hello...
i got a POS computer with win ME and i need to back up before i reformat... only problem is that i can't transfer from computer to computer to do my backup... taking out the harddrive is not an option(it's stuck in there). and it's too much stuff to burn to cds... it would take 7...

so how do i connect ME to XP? i'm not an idiot so i know how to setup a network... i just never worked with ME and now it's being a bitch... plz let me know.

computer specs:
amd duron 128mbram with ME.
amd athlon 1gb ram with XP.

if u need more info, i'll be glad to tell you. . . please help since i got 1 day to do this.

MikeSty · 08-11-2005, 09:14 PM

How is the hard drive stuck? networking with ME = *vomit*

MexicanOnABike · 08-11-2005, 11:20 PM

Quote:

Originally Posted by MikeSty

How is the hard drive stuck? networking with ME = *vomit*

well the harddrive is in a metal casing that is part of the case.. it's the 1st time i see something like that. i can't take it out without taking the whole case apart. so my 2nd choice is to network to do my backup... and now, i can ping from XP to ME but i cannot access the computer. and on the ME computer, i can't ping my XP... neither is blocked by firewall......... FUCK!!!!!!!!

well thanks for the help... my trusty ZONEALARM was blocking it! hahahaha.... i'm an idiot. learn from my mistake ppl!

flat5 · 08-12-2005, 05:42 AM

Most of the drive cases only require removing one screw. Take a good look.

Hey! If you can get the machines close enough to each other, connect the drive to the other machine without removing it.

You might get one of the computers to see the other. That's good enough for what you want.

Install tcp/ip and netB*** (can't remember what it's called) on both machines.
This sometimes helps in your situation. Well, it can help with W98se-XP.
I never tried it with ME. Use same workgroup and user.

Good luck. Don't forget you can use serial ports to transfer or Printer ports.

MikeSty · 08-12-2005, 08:25 AM

Aye, I think I know what yer talking about. Is the HDD in sort of a "cage" ? There's a screw holding that cage in though...

Install TCP/IP and NetBIOS? Uhhh, I'd hope TCP/IP would come installed in the first place

MexicanOnABike · 08-19-2005, 12:33 PM

well just to let you know, i did manage to setup the network and everything so it's all good... i didnt want to remove the fucking HD because it's a factory made case(compaq) so it's really unremovable unless i remove some of the metal clips... (then it would be broken... )

bettaa · 08-19-2005, 12:34 PM

Quote:

Originally Posted by mexicanonabike

well just to let you know, i did manage to setup the network and everything so it's all good... i didnt want to remove the fucking HD because it's a factory made case(compaq) so it's really unremovable unless i remove some of the metal clips... (then it would be broken... )

fucking compaqs.....i wrote off ever working on a compaq computer ever again because there is so much propriatary hardware for it...and they suck to take apart...

/got nothing

MikeSty · 08-19-2005, 02:15 PM

Yeah I had to upgrade the RAM on a bud's old compaq. I had to remove both sides of the case, then cram my little brother's midget hands into a hole in the back of the mobo tray (which covered the entire side) and find the screw on the backside of the CD drives. Then i spent 30min wedging the screwdriver in there and unscrewing the damn CD drive.

Worst part was the thing had 3 PCI cards and an AGP vid card - couldn't get in that way, and a stupid SEC PII which was fucking crusted on. Oh well, GJ on t3h network, bike riding mexican amigo.

08-11-2005, 07:55 PM	#1 (permalink)
MexicanOnABike Location: up north	Win ME to Win XP network hello... i got a POS computer with win ME and i need to back up before i reformat... only problem is that i can't transfer from computer to computer to do my backup... taking out the harddrive is not an option(it's stuck in there). and it's too much stuff to burn to cds... it would take 7... so how do i connect ME to XP? i'm not an idiot so i know how to setup a network... i just never worked with ME and now it's being a bitch... plz let me know. computer specs: amd duron 128mbram with ME. amd athlon 1gb ram with XP. if u need more info, i'll be glad to tell you. . . please help since i got 1 day to do this. __________________ - Movie Reviews - Ratings-

08-12-2005, 05:42 AM	#4 (permalink)
flat5 Very Insignificant Pawn Location: Amsterdam, NL	Most of the drive cases only require removing one screw. Take a good look. Hey! If you can get the machines close enough to each other, connect the drive to the other machine without removing it. You might get one of the computers to see the other. That's good enough for what you want. Install tcp/ip and netB*** (can't remember what it's called) on both machines. This sometimes helps in your situation. Well, it can help with W98se-XP. I never tried it with ME. Use same workgroup and user. Good luck. Don't forget you can use serial ports to transfer or Printer ports. Last edited by flat5; 08-12-2005 at 05:44 AM..

08-19-2005, 12:33 PM	#6 (permalink)
MexicanOnABike Location: up north	well just to let you know, i did manage to setup the network and everything so it's all good... i didnt want to remove the fucking HD because it's a factory made case(compaq) so it's really unremovable unless i remove some of the metal clips... (then it would be broken... ) __________________ - Movie Reviews - Ratings-

08-11-2005, 09:14 PM	#2 (permalink)
MikeSty The Computer Kid :D Location: 127.0.0.1	How is the hard drive stuck? networking with ME = vomit

08-12-2005, 08:25 AM	#5 (permalink)
MikeSty The Computer Kid :D Location: 127.0.0.1	Aye, I think I know what yer talking about. Is the HDD in sort of a "cage" ? There's a screw holding that cage in though... Install TCP/IP and NetBIOS? Uhhh, I'd hope TCP/IP would come installed in the first place

08-19-2005, 02:15 PM	#8 (permalink)
MikeSty The Computer Kid :D Location: 127.0.0.1	Yeah I had to upgrade the RAM on a bud's old compaq. I had to remove both sides of the case, then cram my little brother's midget hands into a hole in the back of the mobo tray (which covered the entire side) and find the screw on the backside of the CD drives. Then i spent 30min wedging the screwdriver in there and unscrewing the damn CD drive. Worst part was the thing had 3 PCI cards and an AGP vid card - couldn't get in that way, and a stupid SEC PII which was fucking crusted on. Oh well, GJ on t3h network, bike riding mexican amigo.