Tilted Forum Project Discussion Community - View Single Post

charliex · 12-13-2003, 08:15 PM

you can also try putting the HD on CS ( cable select too ) it'll work as long as you only have one drive, if Lasereths suggestion doesn't work.

ideal layout is going to be

MotherBoard IDE0 --- cable -- HD Set to master or CS if only drive or as Lasereth sas if it needs to be slave..

MotherBoard IDE1 --- cable -- CD Set to master Jumper position

CS requires a special cable witha twist between the two IDE HD connectors, so don't use it on a cable with no twist and two devices on the same cable.

12-13-2003, 08:15 PM	#12 (permalink)
charliex Junkie Location: North Hollywood	you can also try putting the HD on CS ( cable select too ) it'll work as long as you only have one drive, if Lasereths suggestion doesn't work. ideal layout is going to be MotherBoard IDE0 --- cable -- HD Set to master or CS if only drive or as Lasereth sas if it needs to be slave.. MotherBoard IDE1 --- cable -- CD Set to master Jumper position CS requires a special cable witha twist between the two IDE HD connectors, so don't use it on a cable with no twist and two devices on the same cable. Last edited by charliex; 12-13-2003 at 08:19 PM..