Tilted Forum Project Discussion Community - View Single Post

Ashton · 11-08-2003, 04:35 PM

I usually bleed both rear calipers at once, then both front calipers..... it's easy, you just take a couple of plastic coke bottles and hang them with some wire from each caliper with a inch of brake fluid in each bottle......... crack open both bleeder nipples and attach a piece of vacuum line from each nipple to the bottles making sure the hose is submerged into the brake fluid, then just pump the pedel (keeping a eye on the fluid level in the master) until you get no air bubbles then tighten the bleeder nipples and move on to the front calipers.

11-08-2003, 04:35 PM	#4 (permalink)
Ashton PORNHOUND Location: California	I usually bleed both rear calipers at once, then both front calipers..... it's easy, you just take a couple of plastic coke bottles and hang them with some wire from each caliper with a inch of brake fluid in each bottle......... crack open both bleeder nipples and attach a piece of vacuum line from each nipple to the bottles making sure the hose is submerged into the brake fluid, then just pump the pedel (keeping a eye on the fluid level in the master) until you get no air bubbles then tighten the bleeder nipples and move on to the front calipers. Last edited by Ashton; 11-08-2003 at 04:37 PM..