|
if you dont drain and run them dry use sta-bil in the fuel.
after you run it dry, pull the plug and put a squirt or two of oil on the piston, put the plug back in. make sure deck is really clean, scrub it down with soap and water. let dry then i like to give a quick spray with like wd-40 on the bottom of the deck. also if you sharpen blade coat it in oil as it will flash rust. I always change the oil before and after longterm storage. I like to fold the handle down to take tension off the pull string. And put it up on bricks so the tires dont get flat spots. then store in a dry place
__________________
Remember, my opinion is as irrelevant as yours.....
|