|
there should be rubber gaskets somewhere that are in a hole. Just gotta look for 'em. If all holes are sealed, get a knife and carefully poke a hole in the sealant, run your wires, then get some hi-temp caulk and reseal it.
Remote switches are expensive and are a royal PITA. I wouldn't mess with it honestly.
Your other option would be to install a relay. You'd need to have one to go from 65W down to a very low wattage. Run it into one of the highbeam wires, then into the switch wire. When the high beams are energized, it'll flip the relay and switch the drivers on. . . .unfortunately that means you can't use the driving lights when the highbeams are off, which IMHO eliminates the point of having the things in the first place!
|