|
jeez, whoever owned your car last sure was a dipshit.
If you can get a pan at a junkyard, that would be the way to go, just make sure you dont get a dented one.
Ashton's method works too, but by pumping up the oil, you dont remove as much of the sludge as you would if you let it drain out the bottom. Probably not a good idea if your car is going to be a daily driver.
you could also try drilling it out and retapping, just make sure you have a little oil in the pan befor you drill. spilled oil is a lot bettert than metal flakes all over your crank and cylinders.
goodluck
__________________
so much to do, so little time.....at least i aint bored.
|