|
It depends on the caulk. Read the tube for clean up instructions. Some will come up with Dawn dish soap, other require stronger chemicals. Acetone, turpentine, paint thinner are a few that work. I would avoid the heat gun, it'll make the adhesive on the back of the tiles release.
Not to be a dick, but next time. Level the floor with 1/4" Luan plywood first, then lay the tiles and everything will go much better for you.
A little known secret of good builders and remodelers. The difference between a hack job and a pro job is the prep work. It's an 80/20 split. If the 80% is in the prep, you'll get pro results. Everything should be perfect before any finish product is applied. Finish product doesn't cover issues, it highlights them.
..
..
__________________
Methods, application and intensity of application vary by the individual. All legal wavers must be signed before 'treatment' begins. Self 'Medicating' is not recommend. However, if necessary, it is best to have an 'assistant' or 'soft landing zone' nearby. Any and all legal issues resulting from improperly applied techniques should be forwarded to: Dewy, Cheatum & Howe, Intercourse, PA 17534. Attn: Anonymous.
|