Tilted Forum Project Discussion Community - View Single Post - Need advice: Screwing up at work a lot lately.

genuinegirly · 05-13-2010, 08:46 PM

As Baraka_Guru said, I don't recall what your work is in. For some reason I'm thinking engineering/CAD?

I find it's easier for me to look at my work afterward with fresh eyes and find errors if I've mechanized the initial process. Planning out the overall project ahead of time, then finding a way to get it accomplished with as little room for error as possible. Setting it aside when it's finished and taking a 5-60 minute break from that project so I can look it over with fresh eyes before I turn in the work. When possible, I work in opportunities to double- and triple-check my work along the way. Especially if future steps are dependent upon perfection of the previous step.

05-13-2010, 08:46 PM	#3 (permalink)
genuinegirly Eat your vegetables Super Moderator Location: Arabidopsis-ville	As Baraka_Guru said, I don't recall what your work is in. For some reason I'm thinking engineering/CAD? I find it's easier for me to look at my work afterward with fresh eyes and find errors if I've mechanized the initial process. Planning out the overall project ahead of time, then finding a way to get it accomplished with as little room for error as possible. Setting it aside when it's finished and taking a 5-60 minute break from that project so I can look it over with fresh eyes before I turn in the work. When possible, I work in opportunities to double- and triple-check my work along the way. Especially if future steps are dependent upon perfection of the previous step. __________________ "Sometimes I have to remember that things are brought to me for a reason, either for my own lessons or for the benefit of others." Cynthetiq "violence is no more or less real than non-violence." roachboy Last edited by genuinegirly; 05-13-2010 at 08:49 PM..