|
setting up the cutting torch
you set your bottles at 1-4 ratio first 10 gas and 40 oxy then turn your gas on high and lite not coors lol then turn down when it gets stable, then adjust your oxy till it sounds like a sheet tearing and it has a feather on the end now you can rip the metal with no slag
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
setting up first is important because the rest will not matter unless your good to go,you run the torch along the metal you will cut wether a track or by hand to remove oil and rust then you will cut the best heart you ever saw
|