My bathroom sink has been broken for about a year... accientally snapped the tailpiece extension.
Every few months it attempt to remove the unit from the sink with no luck. It's really annoying me and I refuse to pay the jacked up rates a plumber would charge me (so far, cheapest I've called and found has been $95... which is a total rip off).
Basically what's happening is the huge nut UNDER the sink.. when I unscrew it... the lip on the top moves with it. So I need to somehow stop the lip on the top while unscrewing the bottom.
However, the wrench that i have keeps stripping the sides and I'm starting to get very pissed at the whole situation.
Any help would be greatly appreciated!
Ok, managed to get the main unit off by some random stroke of luck... but now in putting the metal tail piece into the pvc j-unit parts, i notice the metal slides in and out freely.
the plastic o-rings that they gave me don't fit at all. like one fits around the metal part, but won't fit at all in the plastic piece it slides into.
i tried plumber's putty to make a tight seal around the metal part to the plastic, but that just crumbles right off.
i really don't understand this stuff, and there's absolutely nothing on google
Just tried leaving the metal resting in the plastic piece, and if i fill the sink up and let it drain... it leaks around it.
What's supposed to go between the metal pipe and the plastic pvc?
Grr, why does it keep putting my replies up in the original post?
Anyway, there's the metal coming outta the drain connecting to a plastic long piece, which in turn connects to the j-unit.
Both the metal connecting point and the inital junit connecting point are leaking.