|
I agree with monkeysugar; If you are so inclined, go to Radio Shack and buy a headphone jack, or find an old or cheap set of headphones and snip the connector off. Cut the existing connector and an inch or two of the cable. Use some heat shrink tubing to insulate each conductor and then splice the wires from your new connector into the newly exposed wires of your headphones. Any friend or acquaintance with some electronics experience should have no problems with this.
__________________
My name is goddfather40 and I approved this message.
I got ho's and I got bitches,
In C++ I branch with switches
-MC Plus+
|