Tilted Forum Project Discussion Community - View Single Post

theburner · 01-12-2005, 12:41 PM

It has been awhile since I set up the Raid on my system, but if I remember right I didn't need any raid drivers to use my SATA ports. Check your BIOS to ensure that you aren't set up for RAID. I have an IC7-Max3, IC7-G, and IC7. All have Raid on them except the IC7, and I didn't use any raid drivers to install my SATA.

1) Check your BIOS to ensure that you haven't got it configured to automatically set up RAID.
2) Reinstall, but don't load your RAID Drivers. [edit: by reinstall, I mean reinstall the drive without loading the RAID Drivers]

My bet is the "out of resources" refers to the lack of a second SATA Drive (ie your system is trying to RAID the single drive).

01-12-2005, 12:41 PM	#3 (permalink)
theburner Canadian Beer Ambassador Location: Cumming, GA	It has been awhile since I set up the Raid on my system, but if I remember right I didn't need any raid drivers to use my SATA ports. Check your BIOS to ensure that you aren't set up for RAID. I have an IC7-Max3, IC7-G, and IC7. All have Raid on them except the IC7, and I didn't use any raid drivers to install my SATA. 1) Check your BIOS to ensure that you haven't got it configured to automatically set up RAID. 2) Reinstall, but don't load your RAID Drivers. [edit: by reinstall, I mean reinstall the drive without loading the RAID Drivers] My bet is the "out of resources" refers to the lack of a second SATA Drive (ie your system is trying to RAID the single drive). __________________ Take Off Eh! Last edited by theburner; 01-12-2005 at 03:44 PM..