Tilted Forum Project Discussion Community - View Single Post - How to Build a custom fiberglass subwoofer enclosure.

krwlz · 09-28-2004, 06:10 PM

Well, for the first part, they are 10 inch woofers, Infinity Perfect VQ's. The volume I used for each woofer was .75 cu ft, which was one of many recomended volumes in the manuals for them. In the long run, they will be run by (probably) 2 infinity amps at 460 watts a piece.

For the second, I'm not entirly sure, except that I have seen it here: http://www.cardomain.com/item/FSHFIFOAM2Q

I have a feeling however, that a similar product can be found elsewhere, at a lower cost.

09-28-2004, 06:10 PM	#8 (permalink)
krwlz Fledgling Dead Head Location: Clarkson U.	Well, for the first part, they are 10 inch woofers, Infinity Perfect VQ's. The volume I used for each woofer was .75 cu ft, which was one of many recomended volumes in the manuals for them. In the long run, they will be run by (probably) 2 infinity amps at 460 watts a piece. For the second, I'm not entirly sure, except that I have seen it here: http://www.cardomain.com/item/FSHFIFOAM2Q I have a feeling however, that a similar product can be found elsewhere, at a lower cost. Last edited by krwlz; 09-28-2004 at 06:12 PM..