Tilted Forum Project Discussion Community - View Single Post

clavus · 06-13-2004, 06:50 PM

Here's a little tip that should staunch the bleeding -

Mask - use the cool, thin, blue masking tape for flames. Or use frisket, if you are so inclined. Now spray a light coating of CLEAR around the edges of your design. Any bleeding that happens will be with clear paint AND all your little holes will now be sealed (so to speak).

NOW paint your flames. When its all done, take off the mask and apply clearcoat over the whole thing. Ta DA! no visible bleeding!

06-13-2004, 06:50 PM	#4 (permalink)
clavus pow! Location: NorCal	Here's a little tip that should staunch the bleeding - Mask - use the cool, thin, blue masking tape for flames. Or use frisket, if you are so inclined. Now spray a light coating of CLEAR around the edges of your design. Any bleeding that happens will be with clear paint AND all your little holes will now be sealed (so to speak). NOW paint your flames. When its all done, take off the mask and apply clearcoat over the whole thing. Ta DA! no visible bleeding! __________________ Ass, gas or grass. Nobody rides for free.