Tilted Forum Project Discussion Community - View Single Post

apetaster · 05-04-2003, 04:08 AM

Then use a drill press, set it to the correct depth and use spade or forstner bits (all set to the same depth on the press and drill
out the pattern. Clean up with a chisel.

Definitely not the ideal, but it can work if you don't mind an ugly cavity.

05-04-2003, 04:08 AM	#9 (permalink)
apetaster Insane Location: P.R. Mass.	Then use a drill press, set it to the correct depth and use spade or forstner bits (all set to the same depth on the press and drill out the pattern. Clean up with a chisel. Definitely not the ideal, but it can work if you don't mind an ugly cavity.