Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Weaponry (https://thetfp.com/tfp/tilted-weaponry/)
-   -   Ammo's affect on a firearm (https://thetfp.com/tfp/tilted-weaponry/39333-ammos-affect-firearm.html)

rider6061 12-17-2003 07:17 AM

Ammo's affect on a firearm
 
I have a question regarding ammo choices and their affect on the firearm. If using cheap ammo at the range, am I doing anything that will affect any long term characteristics of my pistol? Does using cheap ammo change the physical properties of a gun more than a quality ammo? I am new to this and would really appreciate any and all feedback.

Moonduck 12-17-2003 09:08 AM

Barring such out of normal experience wierdness as catastrophically bad ammo or extremely worn/fragile weapons, all that bad ammo is likely to do is foul your gun more. In other words, the lower quality powder and lower quality bullets will leave more carbon and lead deposits causing you to work harder when cleaning.

Cheap ammo may well affect reliability though, and reliability failures may cause mnor damage. If you are firing an auto-loader, a cheap casing may cause a stovepipe (ie when an ejected round does not clear the ejection port and is trapped by the slide/bolt returning to battery), and stovepipes can cause minor damage to your firearm's finish.

The thing to remember is that you firearm is (hopefully) very well built, and designed to work under adverse conditions (all guns, excepting competition guns are designed, in one way or another, to function in adversity), and to accept ammo loaded to a broad range of tolerances. Don't use truly crap ammo and be careful if you have a stoppage/failure.

Last word, some cheap ammos use corrosive primers. It's not that big a deal so long as you religiously clean the bore after every trip to the range, but it is something to pay attention to as corrosives will wear/corrode your bore if you do not properly clean them out after a shoot.

rider6061 12-17-2003 10:36 AM

Thank you Moonduck. Other than price, is there a way to tell the bad from the good or does that come with experience? Are there particular brands to look for or avoid? My application is a 9mm S&W 910.

Moonduck 12-17-2003 09:37 PM

Well, surplus military ammo is usually where your best deals reside, but it is also where you'll find such things as steel cases (bad idea) and corrosive primers. Ask whomever you are buying ti from what the country of origin is, what the cases are made from, and whether or not it is corrosive.

For new ammo for plinking/range-time, I tend to buy Sellier & Belliot when I can find it. It is reasonably priced and made by a NATO provider, so it is up to snuff (it is also lacquer-sealed at front and back making it an excellent choice for long-term storage). I also deal a lot with Georgia Arms for professionally reloaded amoo. They make good stuff. For actual carry, I shoot Federal Premium, good, reliable stuff with excellent terminal performance.

I would advise you to be very wary of Chinese surplus ammo. My experience has shown it to be utter crap. YMMV.

SuperMidget 12-17-2003 10:39 PM

Other than one minor point, Moonduck has it nailed. (Sorry, but I have to disagree on this one)

Moonduck mentioned theat steel cases are a no-no. In most precision tolerance firearms (ie new, non-military style firearms from major manufacturers) steel cases are not good. In military-style rifles (Ak's, SKS, mini-14 etc.) steel cased are ok. They were designed to looser tolerances and so steel cases are such a problem. However, I hesitate to include civilian models of the AR family. The civilian models are generally built to tighter tolerances than is normal for military style rifles.

I persoanlly don't hesitate to feed steel cases through my Mini-14. (Wolf brand ammo for anyone familiar.) In fact, Wolf ammo has better performance than most other cheap ammo. Because of the steel cases they can push more powder into it, and get more power. The only issue I have with the stuff, is it isn't clean. If I put 40 rounds through my gun, it must be cleaned. However, that is more from the design of the firearm than dirty ammo. But that's another thread.

Slims 12-17-2003 11:28 PM

For your handgun, I would avoid the cheap foreign brands like Sellier & Bellot and Wolf. They have a reputation for destroying guns.

Also, stay away from reloaded or remanufactured ammunition. This stuff is often the cheapest stuff on the shelf, but many, if not most gun ranges won't let you shoot it at their range, and it will void the warranty on your pistol. It is often that bad.

Other than that, if you keep your weapon clean and well maintained, you should be able to shoot just about anything.

rider6061 12-18-2003 06:37 AM

thanks to all.

I really appreciate your advice!

mtsgsd 12-18-2003 08:49 AM

One more thing to watch out for. Some steel cased ammo is coated with a varnish of some type to inhibit corrosion. This can melt and stick to the inside of your gun chamber while shooting. As long as you are shooting you're ok, but once you stop and let it cool down, it hardens and you suddenly can't chamber a round. This happens more with close tolerance chambers like a match ar15 for example. If I remember right foreign surplus ammo is frequently treated this way because of the conditions it's expected to be in, but doesn't Wolf ammo do the same thing? Can't remember for sure but maybe someone else does.

SuperMidget 12-18-2003 09:15 AM

Nope, Wolf isn't coated. It is sealed at the primer and bullet, but every other ammo maker does that.

Handguns, I will leave to Moonduck. But for rifles with loose tolerances cheap ammo is not a problem.

Moonduck 12-18-2003 09:24 AM

Yup, nixed steel cases because of the specific gun mentioned.

Can't agree with Greg700 on S&B or that all reloads are bad. I've put thousands of S&B 9mm rounds through my Glock with nary a hitch. The Czech's make usable ammo, not match grade, but never had problems with it. As to reloads, Georgia Arms being the example I offered, I'd put it through any gun I own. They do good work. It is more a matter of who is doing the reloading, not reloads in general.

I don't like steel cases for anything. Last thing you need is a hardness issue where the case is harder than the lip on your extractor. A chipped extractor is a very bad thing. That said, I had no problems running steel cased ammo through the coupla Kalshnikovs I had. They're built with steel cases in mind.


All times are GMT -8. The time now is 09:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360