Tilted Forum Project Discussion Community  

Go Back   Tilted Forum Project Discussion Community > Interests > Tilted Technology


 
 
LinkBack Thread Tools
Old 03-11-2005, 06:55 AM   #1 (permalink)
IC3
Poison
 
IC3's Avatar
 
Location: Canada
Stupid Question About Cleaning Computer

I told myself that when i finally had my new computer built i would clean it once a month or whenever it needs it.

I bought a can of the compressed air but how good does this stuff clean the case out? Not that i have any other option to clean it out with..Just lookin for some tips on the best way to spray out the case. I used this stuff once before on my old computer and i remember sometimes some liquid would come out of the can and land on whatever piece of the hardware i was spraying. Will this liquid damage anything? (My old computer still worked when it happened) I just wanna be cautious with my new computer and not fuck it up.

Thanks.
__________________
"To win any battle, you must fight as if you were already dead" -Musashi
IC3 is offline  
Old 03-11-2005, 07:00 AM   #2 (permalink)
Insane
 
tres's Avatar
 
Location: Long Island, NY
If you hold the can upright, the liquid will not come out. Open up the case, take it outside and just blow the dust and crap out. it should be fine.. be sure to blow out inside the power supply too...
tres is offline  
Old 03-11-2005, 07:30 AM   #3 (permalink)
"Officer, I was in fear for my life"
 
hrdwareguy's Avatar
 
Location: Oklahoma City
Remember to try and point the nozzle out of the case. You don't want to blow the dust and crap farther into the case/power supply.
__________________
Gun Control is hitting what you aim at

Aim for the TFP, Donate Today
hrdwareguy is offline  
Old 03-11-2005, 07:36 AM   #4 (permalink)
Tilted
 
i would also like to add that you should use short bursts, don't just hold the trigger for a long period of time. Some of them even come with a tube to attach to the nozzle, you can keep the bottle flat on the table and just move the tube around. Make sure you get the fins of the cooling fan really good. If you want to clean your monitor just use a microfiber cloth, you can wipe down the whole monitor without scratching anything.
userasdf1234 is offline  
Old 03-11-2005, 08:05 AM   #5 (permalink)
IC3
Poison
 
IC3's Avatar
 
Location: Canada
Thanks for the advice guys.
__________________
"To win any battle, you must fight as if you were already dead" -Musashi

Last edited by IC3; 03-11-2005 at 08:13 AM..
IC3 is offline  
Old 03-11-2005, 08:19 AM   #6 (permalink)
Crazy
 
Location: Meechigan
I have found that a decent wet/dry vac will work just as good, if not a little better than a can of air. That way you won't have to worry about pushing the dust and crap any further into the case.
__________________
Freedom would be not to choose between black and white but to abjure such prescribed choices. - Theodor Adorno
killeena is offline  
Old 03-11-2005, 08:29 AM   #7 (permalink)
Professional Loafer
 
bendsley's Avatar
 
Location: texas
<-- works for a company that makes canned air among other things. Haha, endless supply.
__________________
"You hear the one about the fella who died, went to the pearly gates? St. Peter let him in. Sees a guy in a suit making a closing argument. Says, "Who's that?" St. Peter says, "Oh, that's God. Thinks he's Denny Crane."
bendsley is offline  
Old 03-11-2005, 10:23 AM   #8 (permalink)
Betitled
 
Quote:
Originally Posted by bendsley
<-- works for a company that makes canned air among other things. Haha, endless supply.
The cans are $5 a bottle, and I always play with the damn air so they don't last very long. Lucky mofo.
Glava is offline  
Old 03-11-2005, 10:24 AM   #9 (permalink)
Betitled
 
Quote:
Originally Posted by killeena
I have found that a decent wet/dry vac will work just as good, if not a little better than a can of air. That way you won't have to worry about pushing the dust and crap any further into the case.
They're dangerous to sensitive electronics because of static discharge.
Glava is offline  
Old 03-11-2005, 01:51 PM   #10 (permalink)
R3d
Insane
 
Location: Sask, Canada
yea do NOT use a vacumm around computers..
R3d is offline  
Old 03-11-2005, 02:11 PM   #11 (permalink)
Crazy
 
Don't forget to clean out any fan filters that your case may have.

Also, the liquid can damage things. (If memory serves)It is Carbon Dioxide in its liquid state. It is VERY cold. Parts that are sensitive to rapid temperature change can be damaged.
__________________
-BoltedDown
BoltedDown is offline  
Old 03-11-2005, 06:48 PM   #12 (permalink)
Tilted
 
But if the parts survive the temp change, there shouldn't be any damage (since CO2 will evaporate).

Well, i've always used a vacumn to clean out my comp, and i've never had any issues. Where does this static discharge come from?
merlin is offline  
Old 03-11-2005, 07:30 PM   #13 (permalink)
Just here for the beer.
 
Wyodiver33's Avatar
 
Location: Ft. Lauderdale, Floriduh
Keep in mind that modern motherboards have 3.3 V running through the motherboard even when the computer is "off." I always kill power to my PSU before spraying air, just in case any fluid comes out of the can.
__________________
I like stuff.
Wyodiver33 is offline  
Old 03-11-2005, 08:03 PM   #14 (permalink)
Adequate
 
cyrnel's Avatar
 
Location: In my angry-dome.
Quote:
Originally Posted by merlin
But if the parts survive the temp change, there shouldn't be any damage (since CO2 will evaporate).
Thermal contraction and expansion cause fatigue in materials. Shouldn't be a big deal if the computer has cooled but if a component is hot before you freeze it you could destroy it completely. The quickest way to destruction is to freeze just part of a larger, hot, component.

Quote:
Well, i've always used a vacumn to clean out my comp, and i've never had any issues. Where does this static discharge come from?
A charge can be created by walking across the floor, rubbing your nylons, etc. Moving air creates a charge. Quickly moving air does it quickly.

Vacuums aren't always dangerous but they can be, and vacuums aren't just dangerous because of ESD. Vacuums:

-can be unwieldy. Easy to knock components & cables loose. (the most common and immediate vacuum hazard I've seen)
-can conduct charges between the hozzle and motor, and are usually ungrounded.
-create their own charge through air movement, and can hold it until you touch a conductor.

The ESD problem comes from a combination of circumstances not unique to vacuums. Damage from ESD implies a charge, possibly generated over a long period, then a transfer of that charge to vulnerable components. Just about everything in your computer is either vulnerable or connected to something vulnerable.

There are ways to minimize problems. Keeping everything at the same potential by touching the case and vacuum hose at all times. Not shuffling your feet. Doing your work away from carpet, ad infinitum. (google ESD prevention)

The "don't vacuum your semiconductors" rule comes from industry and military experience. Through tool choices and habits you can be lucky for years but in general it's not the best idea. It's definitely not smart to recommend to someone who might use their 15HP shopvac to lift dust & those pesky parallel traces.

BTW, there are vacuums made for electronics cleaning work that have a nozzle path to ground. Use that in your disclaimers to be safe.
cyrnel is offline  
Old 03-12-2005, 04:52 PM   #15 (permalink)
Crazy
 
Quote:
Originally Posted by Glava
The cans are $5 a bottle, and I always play with the damn air so they don't last very long. Lucky mofo.
I too do this... they are just so damn fun. My personal favorite is turning the can upside down and freezing either a) water or b) paper with the spray.
__________________
Fight apathy! ..... or dont.
FloydianOne is offline  
Old 03-16-2005, 08:24 AM   #16 (permalink)
Crazy
 
Location: Meechigan
Quote:
Originally Posted by Glava
They're dangerous to sensitive electronics because of static discharge.
Oops!
__________________
Freedom would be not to choose between black and white but to abjure such prescribed choices. - Theodor Adorno
killeena is offline  
Old 03-16-2005, 08:43 AM   #17 (permalink)
Insane
 
Location: Michigan
Quote:
Originally Posted by FloydianOne
I too do this... they are just so damn fun. My personal favorite is turning the can upside down and freezing either a) water or b) paper with the spray.
Hahaha, a co-worker did that on his cube wall (yes, it was pretty much allowed as we had full control over our area and how it was "decorated"). We would freeze pop bottles and watch the ice evaporate. Man, good use of office time :-D
__________________
Patterns have a habit of repeating themselves.
asshopo is offline  
 

Tags
cleaning, computer, question, stupid

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 12:19 AM.

Tilted Forum Project

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360