What's the best way to rip audio from DVD? - Tilted Forum Project Discussion Community

Daniel_ · 08-25-2008, 01:32 PM

Hi Folks,

For a few years I've ripped audio from DVD using audacity, and been happy with it.

Recently I've tried to take the audio of a couple of concert DVDs so I can listen to them on my iPod, and you know what - it's a pain in the arse. It's time consuming, and if anything causes the DVD to stutter you get dead spots that you have to edit out.

So - the thing I'd like your collective help on is this: is there a decent, free DVD audio ripper that actually works? I've googled a few and tried a couple and can't seem to find anything that actually does the job.

Therefore I'm after personal recommendation of stuff you've actually tried.

Thanks in advance.

Vigilante · 08-25-2008, 01:35 PM

I haven't looked, but have you tried sourceforge yet?

mrklixx · 08-25-2008, 07:23 PM

You could do it in a fairly simple 2-step process with DVD Decrypter and Super.

Open DVD Decrypter and choose your dvd location. Then under "mode" chose "ifo". Then go to tools/settings and chose the "ifo mode" tab. Go to where it says "file splitting" and chose "by chapter". Click ok. Now in the main window go to where it says "stream processing" in the upper right hand corner. Coose "enable stream processing". Deselect everything except your audio track. Make sure "demux" is selected. Now click the dvd icon in the lower left corner. It will give you a ".vob" file (or files) that contains only the audio track.

Open up Super and drag and drop the .vob file(s) to the area at the bottom. Now go to the top left corner where it says "select output container" and choose aac or mp3. Then in the middle, where it says "audio" choose what birate you want. Then right click and choose "output file saving management" to choose the output directory. Then just click "encode active files" at the bottom, and you should be good to go.

Hopefully my instructions were ok enough, and let me know if I can clarify anything.

mrklixx · 08-25-2008, 09:04 PM

I don't think handbrake allows for audio only.

Daniel_ · 08-25-2008, 11:05 PM

Quote:

Originally Posted by mrklixx

You could do it in a fairly simple 2-step process with DVD Decrypter and Super.

Open DVD Decrypter and choose your dvd location. Then under "mode" chose "ifo". Then go to tools/settings and chose the "ifo mode" tab. Go to where it says "file splitting" and chose "by chapter". Click ok. Now in the main window go to where it says "stream processing" in the upper right hand corner. Coose "enable stream processing". Deselect everything except your audio track. Make sure "demux" is selected. Now click the dvd icon in the lower left corner. It will give you a ".vob" file (or files) that contains only the audio track.

Open up Super and drag and drop the .vob file(s) to the area at the bottom. Now go to the top left corner where it says "select output container" and choose aac or mp3. Then in the middle, where it says "audio" choose what birate you want. Then right click and choose "output file saving management" to choose the output directory. Then just click "encode active files" at the bottom, and you should be good to go.

Hopefully my instructions were ok enough, and let me know if I can clarify anything.

Thanks for this, I'll give it a try.

mrklixx · 09-09-2008, 04:13 PM

I was wondering how this worked out for you.

Daniel_ · 07-18-2009, 01:26 AM

Quote:

Originally Posted by mrklixx

I was wondering how this worked out for you.

Hi - never realised you'd posted this, sorry.

Well, it worked, but now I have a new PC, and so needed to reload the software. Thought is was the perfect time to search out this thread and remind anyone else of this method.

alicebill · 06-30-2011, 10:28 PM

Do you mean rip dvd to audio format? I know eahoosoft dvd ripper can do this, with high quanlity and fast speed

08-25-2008, 01:32 PM	#1 (permalink)
Daniel_ Evil Priest: The Devil Made Me Do It! Location: Southern England	What's the best way to rip audio from DVD? Hi Folks, For a few years I've ripped audio from DVD using audacity, and been happy with it. Recently I've tried to take the audio of a couple of concert DVDs so I can listen to them on my iPod, and you know what - it's a pain in the arse. It's time consuming, and if anything causes the DVD to stutter you get dead spots that you have to edit out. So - the thing I'd like your collective help on is this: is there a decent, free DVD audio ripper that actually works? I've googled a few and tried a couple and can't seem to find anything that actually does the job. Therefore I'm after personal recommendation of stuff you've actually tried. Thanks in advance. __________________ ╔═════════════════════════════════════════╗ Overhead, the Albatross hangs motionless upon the air, And deep beneath the rolling waves, In labyrinths of Coral Caves, The Echo of a distant time Comes willowing across the sand; And everthing is Green and Submarine ╚═════════════════════════════════════════╝

08-25-2008, 01:35 PM	#2 (permalink)
Vigilante Broken Arrow Location: US	I haven't looked, but have you tried sourceforge yet? __________________ We contend that for a nation to try to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle. -Winston Churchill

08-25-2008, 07:23 PM	#3 (permalink)
mrklixx President Rick Location: location location	You could do it in a fairly simple 2-step process with DVD Decrypter and Super. Open DVD Decrypter and choose your dvd location. Then under "mode" chose "ifo". Then go to tools/settings and chose the "ifo mode" tab. Go to where it says "file splitting" and chose "by chapter". Click ok. Now in the main window go to where it says "stream processing" in the upper right hand corner. Coose "enable stream processing". Deselect everything except your audio track. Make sure "demux" is selected. Now click the dvd icon in the lower left corner. It will give you a ".vob" file (or files) that contains only the audio track. Open up Super and drag and drop the .vob file(s) to the area at the bottom. Now go to the top left corner where it says "select output container" and choose aac or mp3. Then in the middle, where it says "audio" choose what birate you want. Then right click and choose "output file saving management" to choose the output directory. Then just click "encode active files" at the bottom, and you should be good to go. Hopefully my instructions were ok enough, and let me know if I can clarify anything. __________________ This post is content. If you don't like it then you are not content. Or perhaps just incontinent. This is not a link - Do not click here I hate animated avatars.

08-25-2008, 09:04 PM	#4 (permalink)
mrklixx President Rick Location: location location	I don't think handbrake allows for audio only. __________________ This post is content. If you don't like it then you are not content. Or perhaps just incontinent. This is not a link - Do not click here I hate animated avatars.

09-09-2008, 04:13 PM	#6 (permalink)
mrklixx President Rick Location: location location	I was wondering how this worked out for you. __________________ This post is content. If you don't like it then you are not content. Or perhaps just incontinent. This is not a link - Do not click here I hate animated avatars.

06-30-2011, 10:28 PM	#8 (permalink)
alicebill Upright	Do you mean rip dvd to audio format? I know eahoosoft dvd ripper can do this, with high quanlity and fast speed