|
Update: So, almost a year later and i got around to looking at my snowblower last week. The brand is Noma, and the motor is made by Tecumseh. My wife had a very good idea, look in the manual there usually is a trouble shooting section. So, I took a look and followed the instructions to remove the coweling and inspect the auger belt & the drive belts. There should be about half an inch of play in the auger belt.
so I did this, and found that there was about 2 to 3 inches of play in the auger belt. So following instructions, I tightened the tensioner pully, and re-assembled the cowl. Looks like this is the problem, as the belt was so loose, that any load would have caused it to slip around the auger pully, rather than turn it. I will test this weekend once I gas it up.
Instructions! Owner's Manuals. they are useful!
__________________
You said you didn't give a fuck about hockey
And I never saw someone say that before
You held my hand and we walked home the long way
You were loosening my grip on Bobby Orr
http://dune.wikia.com/wiki/Leto_Atreides_I
|