03-22-2008, 10:13 PM
|
#13 (permalink)
|
|
Sir, I have a plan...
|
Quote:
|
Jack up and secure the vehicle so that the rear tire is off the ground. Remove the tire from the drum, and set it aside. Using the 11mm flare-nut wrench, loosen and unthread the brake line fitting until it spins free from the wheel cylinder. You may find it easier to reach if you first remove the bleeder valve with a 7mm wrench.
|
Problem solved...
__________________
Fortunato became immured to the sound of the trowel after a while.
|
|
|