![]() |
![]() |
#2 (permalink) |
Too hot in the hot tub!
|
1) get into the BIOS
--When the laptop first starts up you will see "Hit Del to enter setup" or some variation. 2) find the BIOS setting to boot from CD --Boot order or some such. Make D (or whatever your CD drive letter is) the first boot option 3) save BIOS and exit --Navigate the BIOS to save changes and exit 4) insert Windows OS CD 5) foot system and hit any key to boot from CD when requested 6) follow on-sceen instuctions to format your HD and install a fresh version on Windows Clear enough?
__________________
But I don't want ANY Spam! |
![]() |
![]() |
#3 (permalink) |
Lover - Protector - Teacher
Location: Seattle, WA
|
A little more explanation if you're curious what you're actually doing. On your computers motherboard (mainboard) there are all sorts of chips and switches and ports. One of those chips is the BIOS. It is the Basic Input-Output System, and is responsible for most of that flashing text you see when your computer boots up. Becuase this is stored permanently on your motherboard, there is very little you can do to "destroy" this. Its a safety net in case your Operating System fails. It will allow you to boot up and change settings on the motherboard, and provide a basic interface for input/output. This can even be done without a hard drive physically in the machine...
"Formatting" your computer means erasing and formatting the hard drive. The easiest way to do this (for Windows users) is to use the Windows CD provided with your computer. It has software that will allow you to erase your harddrive, partition it (divide it into little parts), and re-install the Operating System. So, the above steps are correct.. you must enter the BIOS and find a setting for "Boot Order" or similar, and make sure that it boots from the CD first. Past the BIOS, you need something to "boot" into, whether it be Windows or onto a standalone CD. By setting your CD-drive as the first device to check, it will boot from the CD before checking to boot from your harddrive, where Windows is installed. After doing that, you reboot and it checks the CD drive. The software on the CD tells the computer that it is a bootable device. Now, to "format" your computer. The easiest way to do this is to remove all the partitions (unless there is a Dell Restore Partition, leave that)... and then format the drive with NTFS. NTFS is the file system that Windows XP and others use best. After it is formatted, things can be installed to it. Windows will install and you will be presented with a fresh install of Windows on an empty hard drive. From there, remember to re-install all your device drivers, antivirus, spyware blocker, and other software that you need like Firefox or AIM. Most importantly, remember to run Windows Update to at LEAST sp2, or you'll be reinfected with the same viruses/spyware that probably prompted this decision. ... can you tell I'm bored at work? :-D
__________________
"I'm typing on a computer of science, which is being sent by science wires to a little science server where you can access it. I'm not typing on a computer of philosophy or religion or whatever other thing you think can be used to understand the universe because they're a poor substitute in the role of understanding the universe which exists independent from ourselves." - Willravel |
![]() |
![]() |
#5 (permalink) | |
Insane
Location: NC, USA
|
Quote:
![]()
__________________
Any sarcasm was intentional. |
|
![]() |
![]() |
#7 (permalink) |
Lover - Protector - Teacher
Location: Seattle, WA
|
Same process.. Windows98 CD is bootstrapped.. the only instruction that shoudl change is you have to format as FAT32 instead of NTFS since Win98 doesnt have native NTFS support..
__________________
"I'm typing on a computer of science, which is being sent by science wires to a little science server where you can access it. I'm not typing on a computer of philosophy or religion or whatever other thing you think can be used to understand the universe because they're a poor substitute in the role of understanding the universe which exists independent from ourselves." - Willravel |
![]() |
![]() |
#8 (permalink) |
Addict
Location: Somewhere... Across the sea...
|
If you really want to make sure that EVERYTHING is gone, including the old boot sector partition, you need to use something like Darik's Boot and Nuke from http://dban.sourceforge.net/ . After you set the system to boot from CD, put this puppy in. It loads a small amount of linux code into the RAM, then wipes the disc entirely, up to DoD standards. Just like new! Use whatever OS disc you want afterward, and you will prompted to format with the appropriate file system.
__________________
The difference between theory and reality is that in theory there is no difference. "God made man, but he used the monkey to do it." DEVO |
![]() |
![]() |
#9 (permalink) | |
Junkie
Location: Toronto
|
Quote:
![]() thanks JinnKai, this is very helpful... |
|
![]() |
![]() |
#10 (permalink) |
Talk nerdy to me
Location: Flint, MI
|
To add some helpful advice, if you can get to a command prompt:
at c:\ type "disk" that is what allows you to control the partitions on the "fixed" disk. (Most people wonder what the "F" in fdisk stands for.) Or, you can just type in "format c: /s /u" the swithches /s & /u are to make it a system disk and do an "unconditional" format. /is also bored at work ![]()
__________________
I reject your reality, and substitute my own -- Adam Savage |
![]() |
Tags |
formatting |
|
|