A laptop-sized system for a desk PC. - Tilted Forum Project Discussion Community

Addiction · 11-18-2003, 12:04 AM

So, it goes like this. The case mods in my other thread have me inspired, and I have a DVD player that I don't want lying around.

Problem is, it's 3 times thinner than my PC is wide, and negligably wider than my PC is high. So 3 times less space. And this can mean only one thing - laptop components.

Now, my question - can I get a laptop-sized fit for a system that has all the usual connectors out the back? Bear in mind that a normal motherboard would take up about 3/4 of the length and most of the height of the back panel without any additional components.

I'll see if I can get any pics up.

sailor · 11-18-2003, 10:13 AM

The only thing I can think of off the top of my head is to maybe look into some equipment made for 1U rackmount boxes. They are made to be very slim. They might be too wide, but I would look into it anyways.

Addiction · 11-18-2003, 01:59 PM

Those things tend to be used for servers, yes? In that case, I don't think that they'll have any reasonable graphics solutions. I intend for this to be a LAN-party capable PC, which means a decent graphics card is a must.

But many thanks for your help, it's appreciated.

charliex · 11-18-2003, 02:36 PM

1Us can take AGP cards no problem , usually with a riser

sailor · 11-18-2003, 07:05 PM

Quote:

Originally posted by charliex
1Us can take AGP cards no problem , usually with a riser

Yeah, Im pretty sure you are right. I dont know a lot about 1Us, but it wouldnt surprise me if you could find one with an AGP riser.

And for that matter, its not like you are going to get a good graphics solution with laptop components.

merkerguitars · 11-18-2003, 08:49 PM

via makes some nice kick ass mini boards...not the greatest specs though.......but they will run dvds just fine...

monkeysugar · 12-03-2003, 04:35 PM

http://www.mini-itx.com has TONS of information on this type of thing. There are some amazing projects on this site. You will become one with the dremel

nofnway · 12-05-2003, 10:11 PM

Monkeysugar has it right

some awesome projects on that site....dreaming of my next one.

11-18-2003, 12:04 AM	#1 (permalink)
Addiction Tilted Location: Sydney, Australia	A laptop-sized system for a desk PC. So, it goes like this. The case mods in my other thread have me inspired, and I have a DVD player that I don't want lying around. Problem is, it's 3 times thinner than my PC is wide, and negligably wider than my PC is high. So 3 times less space. And this can mean only one thing - laptop components. Now, my question - can I get a laptop-sized fit for a system that has all the usual connectors out the back? Bear in mind that a normal motherboard would take up about 3/4 of the length and most of the height of the back panel without any additional components. I'll see if I can get any pics up.

11-18-2003, 10:13 AM	#2 (permalink)
sailor beauty in the breakdown Location: Chapel Hill, NC	The only thing I can think of off the top of my head is to maybe look into some equipment made for 1U rackmount boxes. They are made to be very slim. They might be too wide, but I would look into it anyways. __________________ "Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." --Plato

11-18-2003, 08:49 PM	#6 (permalink)
merkerguitars Buffering......... Location: Wisconsin...	via makes some nice kick ass mini boards...not the greatest specs though.......but they will run dvds just fine... __________________ Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985

12-03-2003, 04:35 PM	#7 (permalink)
monkeysugar I'll be on the veranda, since you're on the cross. Location: Rand McNally's friendliest small town in America. They must have strayed from the dodgy parts...	http://www.mini-itx.com has TONS of information on this type of thing. There are some amazing projects on this site. You will become one with the dremel __________________ I've got the love of my life and a job that I enjoy most of the time. Life is good.

12-05-2003, 10:11 PM	#8 (permalink)
nofnway Insane Location: under the freeway bridge	Monkeysugar has it right some awesome projects on that site....dreaming of my next one. __________________ "Iron rusts with disuse, stagnant water loses its purity and in cold water freezes. Even so does inaction sap the vigor of the mind" Leonardo Da Vinci

11-18-2003, 01:59 PM	#3 (permalink)
Addiction Tilted Location: Sydney, Australia	Those things tend to be used for servers, yes? In that case, I don't think that they'll have any reasonable graphics solutions. I intend for this to be a LAN-party capable PC, which means a decent graphics card is a must. But many thanks for your help, it's appreciated.

11-18-2003, 02:36 PM	#4 (permalink)
charliex Junkie Location: North Hollywood	1Us can take AGP cards no problem , usually with a riser