Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Motors (https://thetfp.com/tfp/tilted-motors/)
-   -   Stupid heater problem with my car (https://thetfp.com/tfp/tilted-motors/41349-stupid-heater-problem-my-car.html)

merkerguitars 01-13-2004 06:36 PM

Stupid heater problem with my car
 
Well my car is a 1987 Cadillac Sedan Deville. I'm having a really stupid heater problem. For some reason when my heater is on defrost on the high setting it fogs up my windows and the air has a small hint of antifreeze scent. Earlier in the day I checked my thermostat and I wasn't getting any upper radiator hose pressure. So I changed my thermostat. (I put my old thermostat in a boiling pot of water and the old one didn't open) Before I changed it the air coming out of the defrost smelled heavily like antifreeze. Does anybody know what could be causing this problem?

cj2112 01-13-2004 06:41 PM

sounds like you're heater core has gone bad to me. not a fun job.

mazak 01-13-2004 07:55 PM

hi,.on the passenger side ,floor board is it damp,or wet under the mat or carpet? if so its the heater core.

Peryn 01-13-2004 08:23 PM

The only way i can think of to smell antifreeze in the passenger compartment, would be through the heater core. If your smelling some, chances are its leaking. Not too expensive of a part, but can be a pain in the ass to get to.

Ashton 01-13-2004 10:22 PM

Yes, the heater core has a leak...... probally just a pinhole now, antifreeze is dripping into the heater ducts then the hot air is causing the moisture to fog the windshield.

merkerguitars 01-14-2004 09:12 AM

Eeek I called the local mechanic and he said for a rough estimate its about $500 with parts and labor to fix..........i think i'll do it myself...I do have a gm shop manual that should make the job easier.

Peryn 01-14-2004 09:32 AM

of that 500 bucks, ill bet that about $450 of it is in labor too. Once you get to it, its an incredibly easy job to replace. In some cases though (like mine :( ) you end up completely dissasembling the dash and moving it out of your way. And that takes quite a bit of time. Probably took me about 4-6 hours to do, and i had to find all the bolts and figure out how the dash was on, so it went slower than it would at a dealer. All in all, get a free day and do it yourself.

merkerguitars 01-14-2004 01:36 PM

Well talked it over with my father and he said do it myself. Not worth putting that much money into something I can do myself. Me and a friend are gonna work on it tonight....I'll document the whole thing and post pics for yah guys.


All times are GMT -8. The time now is 12:16 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73