![]() |
![]() |
#81 (permalink) |
Crazy
Location: Michigan
|
big fan of all mustangs... and an even bigger fan of the 5.0's... The 302 will be a good engine for that car... I have a 1969 mustang coupe and it has a 302 and man it has some balls...
__________________
Beer. Now there's a temporary solution. --Homer Simpson |
![]() |
![]() |
#82 (permalink) | |
Lost!!
Location: Kingston, Ontario
|
Quote:
__________________
A.K.A. PainTrain |
|
![]() |
![]() |
#83 (permalink) | |
Buffering.........
Location: Wisconsin...
|
Quote:
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
|
![]() |
![]() |
#84 (permalink) |
Buffering.........
Location: Wisconsin...
|
I just got my engine kit today
![]() ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
![]() |
#87 (permalink) |
Buffering.........
Location: Wisconsin...
|
I'll be sure to make a mpg video of it when i first get it running for yah guys
![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
![]() |
#89 (permalink) |
Buffering.........
Location: Wisconsin...
|
New pics of my engine kit!!!!!!!!!!!!
My nice ford motorsport/msd made distributor ![]() ![]() The Whole kit..... ![]() My Speed Pro Forged Pistons ![]() [IMG]hthttp://www.oldweakandpathetic.com/merkerguitars/merksmustang/Parts/piston2.jpg[/IMG] Remanufactured Connecting Rod ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 10-21-2004 at 03:35 PM.. |
![]() |
![]() |
#91 (permalink) |
Buffering.........
Location: Wisconsin...
|
Got the blocked dropped off at the shop today....the following will be done:
Boiled Magnafluxed New Cam Bearings Bored .030 over Decked New Oil gallery and Freeze Plugs Installed And fully balanced ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
![]() |
#92 (permalink) |
Poo-tee-weet?
Location: The Woodlands, TX
|
oooo peerdy pistons... they have lightening bolts on em cooooool
i wish i had the time/money/space to get a project car... looks like yours is coming along... cant wait to see the final vids
__________________
-=JStrider=- ~Clatto Verata Nicto |
![]() |
![]() |
#93 (permalink) |
Buffering.........
Location: Wisconsin...
|
Next steps:
Wait for engine block to get finished and then paint it then start assembling Pull broken bolt out of timing chaing cover ![]() Get valve covers powercoated wrinkle black. Finish polishing all my brackets. Get new power steering pump 130amp alternator, pmgr hi torque mini starter. And round up a bunch of other misc stuff
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
![]() |
#95 (permalink) | |
Buffering.........
Location: Wisconsin...
|
Quote:
Found out my old harmonic balancer isnt' safe to use ![]() On Tuesday the 8th i'm gonna pick up my other 6 rods and my camshaft (i'll take pics it shoudl be beefy ![]() Got all my pulleys organized and I gave them to a good friend of mine. He's gonna make me a full set of racing aluminum underdrive pullies for free!! Found a really good tutorial for porting and flowing stock ford heads. If I remove the air injection in the heads and port the hell outta them they will flow better than edelbrock heads (not 100% sure on that but anything is better than stock)
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 03-18-2004 at 07:24 AM.. |
|
![]() |
![]() |
#97 (permalink) |
Buffering.........
Location: Wisconsin...
|
w00t I stopped in the engine shop today and every little bit of machine work is done. They are sending the parts out today to get balanced and hopefully I should be able to pick it up next week. Then comes the paint and they said I don't have to do any tolerance checking and just slap it together! Also I picked up a new balancer for about $70 and picked up some sweet ass comp cams racing pushrods for cheap.
![]() Here's a pic of my dirty oil pan I just steamed clean...which will get bead blasted and power coated ![]() ![]() ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 10-21-2004 at 03:38 PM.. |
![]() |
![]() |
#99 (permalink) |
Buffering.........
Location: Wisconsin...
|
Dropped oil pan to get sand blasted and powered coated...(black of course) The engine is ready to be assembled...I just have to scurry the cash together and I can pick it up!
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
![]() |
#100 (permalink) | |
Lost!!
Location: Kingston, Ontario
|
Quote:
Oh ya thats chevy that has the cool engine colours ![]() ![]() But is it ford that has blue?
__________________
A.K.A. PainTrain |
|
![]() |
![]() |
#101 (permalink) | |
Tone.
|
Quote:
The Offenhauser Indy engine was an engine for race cars, and it was 4cyl. Most of the WRC cars are 4 cyl. The BMW Turbo F1 engine is 4cyl, and developed 1400hp in qualification trim. I seem to recall a certain 4 cyl turbocharged mustang in the 80's that was faster than hell. Statements like that just make the poster look like he doesn't know jack about cars. (edit) Forgot to add. That mustang looks like a really fun project. It should keep you busy for a LONG time. Be sure to post progress pics for us! Last edited by shakran; 03-14-2004 at 05:52 PM.. |
|
![]() |
![]() |
#102 (permalink) | |
Buffering.........
Location: Wisconsin...
|
Quote:
anyways... I'm desperately hoping to be able to order my clutch and roller rocker valvetrain this week ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
|
![]() |
![]() |
#103 (permalink) |
Loser
|
Nah the k member and coilovers aren't worth the $$$ with a mild motor. Spray it! Spray it! Those heavy ass TRW slugs will take a beating with a 150 shot, and even those stock con rods should be able to hold up. You just damn well better keep an eye on your fuel with that Edelbrock carb, they lean the hell out of those things from the factory. If you plan on taking it to the track, I'd sooner invest in a decent set of control arms. Stock lowers = wheel hop city.
|
![]() |
![]() |
#104 (permalink) |
Tone.
|
I tend to prefer forced induction over nitrous. It's cheaper, and I never have to refill my supercharger to get any use out of it
![]() |
![]() |
![]() |
#105 (permalink) |
Loser
|
I'm going to disagree with you on that one. When set up properly, you're not going to grenade your motor at any greater risk than you would with a blower. If an injector/pump craps out on you, you're going to do the same amount of damage if you were running boost levels comparable to that of the nitrous, not to mention the fact that you shouldn't have had an inadequate fuel setup to begin with. You can't immediately stop boost with a blower setup, whereas you can with a cutoff/microswitch with nitrous. You're also going to have a much cooler intake charge with spray than you would a blower. Not to mention that he already bought flat tops, which is going to make his compression kind of high to be able and run any decent boost without one hell of an intercooler.
I'm more than happy to spray a 175 shot on my 12:1 sbc without forged internals, and I've been doing so for the past two years, without a single failure to date. Am I pushing the envelope? Probably, but I'm confident that when something goes, its not because of a nitrous issue because I took the time to set it up properly. Same reason I'll be more than happy hitting the $10k 434 with a 400 fog every weekend ![]() |
![]() |
![]() |
#108 (permalink) | |
Buffering.........
Location: Wisconsin...
|
Quote:
![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
|
![]() |
![]() |
#109 (permalink) | |
Lost!!
Location: Kingston, Ontario
|
Quote:
![]()
__________________
A.K.A. PainTrain |
|
![]() |
![]() |
#110 (permalink) | ||
Psycho
|
Quote:
To each his own. There are other factors to a fast car IMO besides performance---Economy is not one of them. Nobody should skimp on the engine. If you don't want to pay for the gas, go buy a Civic (which, despite the opinions of many people around here, is NOT a race car). How about the sound? My buddy has a Nissan 240sx with no exhaust at the moment--as in pipe blown up right after the cat--and 2 weeks ago it was blwon up right BEFORE the cat, and it still sounds like a freaking sewing machine. It's a fun car, nonetheless, but I think this mustang or my 383 cu. in (~6.3L for the import guys) will smoke the living hell out of it when completed. I suppose I could've worded my original statement better, should have read "it's not a DRAG race car". Sure, the Lotus and the Porsche are probably good in the quarter, but that's not what they were intended for. Shoehorn a massive V8 into a small car and chances are it's good for one thing--going real fast in a straight line. Which is what I assume the main purpose of this mustang is going to be for. If I don't know anything about cars, I suppose we can overlook the fact that I'm rebuilding a car from the ground up that's older than me? Sounds good. Quote:
Which brings me to a funny quote I remember hearing at one point or another. "You laugh because I have a N/A motor with no Nitrous. I laugh because I smoke you anyway." So sue me. I have an opinion. By the way, awesome job so far on the Stang. Can't wait to see the finished project. Got any old tires you're planning on blowing up? Last edited by big_bubba; 03-18-2004 at 12:07 AM.. |
||
![]() |
![]() |
#111 (permalink) |
Buffering.........
Location: Wisconsin...
|
Yay more pics......got some progress done....I still have to pick up my friggin block....been to lazy though.....i've been busy getting the little shit together for the block....anyways
Here are my heads i'm using they are D80E heads so they are stock...once I do some nice heavy porting I should have at least decent heads....They are totally rebuilt and I got them off of ebay for only $160 shipped....they will get me down the road Hopefully I can use them with my camshaft I bought....I'm worried about valve spring bind...i'll take it in to the shop that did my block and have them double check it first. ![]() ![]() As you can see by the pic of my exhaust ports that air injection bump will be ground out!!!
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 10-21-2004 at 03:37 PM.. |
![]() |
![]() |
#112 (permalink) |
Buffering.........
Location: Wisconsin...
|
Ok here are some more........
My Waterpump/AC Elminator system.....A couple hours with a rough files and a fine one that Power Steering Bracket polished nicely ![]() ![]() My fully assembled distributor ![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 10-21-2004 at 03:36 PM.. |
![]() |
![]() |
#114 (permalink) | |
Tone.
|
Quote:
BTW, that mustang will smoke a civic in a straight line any day of the week. I'll enjoy watching the mustang try to keep up in the twisties though ![]() Oh, and yes, I have owned a V8. Several in fact. I've owned just about every type of car other than an SUV. I found the V8 (mustang) that I owned to be a shitload of fun - in a straight line. Wasn't worth crap in the corners, damn near gave me heart failure at the gas pump, and when it came right down to it, my Civic Si was more fun to drive anyway. Note FUN TO DRIVE. I'm not racing my Civic. Never thought of it as a race car. Never bought it with the intention of racing it. I bought it because it's like driving an enclosed gokart, and I modify it because I enjoy making it more than it originally was. I'm not one of those ricer idiots who slaps an intake on my Civic and thinks he can take on Vipers. What I mainly object to is that it seems that a lot of people think ANYONE who likes improving their civic is a ricer. Never occurs to them that some of us actually know how to make it faster and don't put fake shit on it. And if that thought does manage to penetrate the cracks, they then spout off about how "well it'll never be faster than my (insert American car here). Our response to that is, so the fuck what? We don't care. We want it to be faster than it was. If that makes it faster than your car, that's great. If not, who cares? I'm just tired of all this domestic vs. import bullshit. You drive your car. I'll drive mine. I can appreciate the good points of your car, and if someone can't appreciate the good points of mine, it would be nice if they would kindly not make an ass of themselves by trying to prove that their car is somehow superior. |
|
![]() |
![]() |
#115 (permalink) | |
Buffering.........
Location: Wisconsin...
|
Quote:
I should get my engine back this friday and then the engine will get a 3 coats of high temp old ford blue engine enamel. Then I will put the cam in, the crank in and the pistons and rods...then once I find some replacement bolts for the ones I broke, the timing cover and water pump will be placed on the block
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
|
![]() |
![]() |
#117 (permalink) | |
Lost!!
Location: Kingston, Ontario
|
Quote:
__________________
A.K.A. PainTrain |
|
![]() |
![]() |
#118 (permalink) |
Buffering.........
Location: Wisconsin...
|
Well for bodywork I just want it to look stock....i'm not gonna hang a body kit or a big cowl induction hood. I like them stock....my doors are rotted out but I know a guy who owns a body shop and he'l probably swing me a deal since I do all his computer work for him. He said he can fix my doors and a couple of rust holes in my fender.
Another funny thing is my roomate keeps on giving me shit everytime I buy parts for it (today I bought a K&N airfilter) He keeps on saying why should I buy parts when I don't even have the car driveable......It's because I want to build it right the first time...sure I could hang a bunch of shit or half ass working parts on it to get it down the road....I just want a nice looking fun car that I can tinker with and if some punkass kid at a light that comes up to me and cocks off(in a camaro, honda bmw...make and model dont' friggin matter) I can toast his ass but...hopefully I will start building my engine next week.
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 Last edited by merkerguitars; 03-23-2004 at 03:15 PM.. |
![]() |
![]() |
#119 (permalink) | |
Lost!!
Location: Kingston, Ontario
|
Quote:
__________________
A.K.A. PainTrain |
|
![]() |
![]() |
#120 (permalink) |
Buffering.........
Location: Wisconsin...
|
Well I got some pulleys off of ebay for $56 they are blue and made of steel but they are underdrive ones...they will get me buy until i get those made by my friend...i have a bunch more stuff to be sent off to be powered coated. i can pick up my block on tuesday then i should have plenty more pics
![]()
__________________
Donate now! Ask me How! Please use the search function it is your friend. Look at my mustang please feel free to comment! http://www.tfproject.org/tfp/showthread.php?t=26985 |
![]() |
Tags |
mustang, project |
|
|