Weekend maintenance list - Tilted Forum Project Discussion Community

pezking4 · 07-24-2003, 03:33 PM

Trying to get a lot of work done to my car this weekend. I have parts waiting in the living room ready to be installed. Unfortunatly, I can't use the Rotary lifts or tools at work anymore (damn cheap owner

), so I have to do the work in my parking lot here at the apartment. Here's what I've got to get done:

Clutch kit
Resurface flywheel
Install upgraded headlight harness
New 85/80W headlight bulbs
New fog light bulbs
Spark plugs
Fuel Filter
Oil change
Install shortened shifter with new shift knob
Bleed hydraulic clutch system
Change tranny fluid
and if I have time... Install some reman. drive axles.

Just got a new breaker bar today and a new torque wrench, so should be a fun time in store for me.

MrGone · 07-24-2003, 03:43 PM

how long is the breaker bar, and where did you get the torque wrench?

does the woman know about it?

pezking4 · 07-24-2003, 03:59 PM

2 ft long with 1/2 inch drive.

I went to a place called Northern Hardware. Amazing prices!

Moonduck · 07-24-2003, 05:49 PM

I hate tranny work...

Northern Hydraulic/Hardware is a great place to buy tools. Harbor Freight is another good discount tool chain.

Booty Man · 07-24-2003, 05:54 PM

What do you drive??

pezking4 · 07-25-2003, 02:07 PM

I drive a maxima.

Just borrowed the "36mm Jesus Nut" from a friend of mine, and got some help coming over later tonight. Time to go start pulling the drive axles.

pezking4 · 07-25-2003, 03:47 PM

Add new hood struts to the list

UPDATE: Got a the driver's side axle, brake assembly, and everything else off the car. Tranny fluid is drained, air intake is out of the way, and most of the tranny is unbolted. Had to quit for the night because I was using my neighbors outlet and they had to go out for the night. So now I don't have enough light to work, so I'll do some more work tomorrow.

Moonduck · 07-27-2003, 01:47 PM

So how did it go?

pezking4 · 07-27-2003, 02:32 PM

Still not finished. I need to borrow another jack or get another person to help because it's kinda hard by myself. Had to haul a bunch of the baby's stuff today and just got home, so I'm gonna try to go at least get something done.

Moonduck · 07-27-2003, 02:50 PM

Last trans I dropped was from my Trooper II. Bloody thing had to come back 1", rotate clockwise 25 degrees, then drop the rear by 6", then back and down. There isn't a transmission jack on the planet that can handle those kind of contortions. As a 4x4 trans with transfer case, it weighed a bit too.

I wound up cutting out the trans hump in the floorboard to run a rope from above. Then had a friend underneath with with me while my dad sat topside holding the rope and helping with angles. It frikken blew.

Hope yours comes out easier.

07-24-2003, 03:33 PM	#1 (permalink)
pezking4 Crazy Location: NC	Weekend maintenance list Trying to get a lot of work done to my car this weekend. I have parts waiting in the living room ready to be installed. Unfortunatly, I can't use the Rotary lifts or tools at work anymore (damn cheap owner ), so I have to do the work in my parking lot here at the apartment. Here's what I've got to get done: Clutch kit Resurface flywheel Install upgraded headlight harness New 85/80W headlight bulbs New fog light bulbs Spark plugs Fuel Filter Oil change Install shortened shifter with new shift knob Bleed hydraulic clutch system Change tranny fluid and if I have time... Install some reman. drive axles. Just got a new breaker bar today and a new torque wrench, so should be a fun time in store for me.

07-25-2003, 03:47 PM	#7 (permalink)
pezking4 Crazy Location: NC	Add new hood struts to the list UPDATE: Got a the driver's side axle, brake assembly, and everything else off the car. Tranny fluid is drained, air intake is out of the way, and most of the tranny is unbolted. Had to quit for the night because I was using my neighbors outlet and they had to go out for the night. So now I don't have enough light to work, so I'll do some more work tomorrow. Last edited by pezking4; 07-25-2003 at 06:58 PM..

07-24-2003, 03:43 PM	#2 (permalink)
MrGone Tilted Location: WA	how long is the breaker bar, and where did you get the torque wrench? does the woman know about it?

07-24-2003, 03:59 PM	#3 (permalink)
pezking4 Crazy Location: NC	2 ft long with 1/2 inch drive. I went to a place called Northern Hardware. Amazing prices!

07-24-2003, 05:49 PM	#4 (permalink)
Moonduck Junkie Location: SE USA	I hate tranny work... Northern Hydraulic/Hardware is a great place to buy tools. Harbor Freight is another good discount tool chain.

07-24-2003, 05:54 PM	#5 (permalink)
Booty Man Junkie	What do you drive??

07-25-2003, 02:07 PM	#6 (permalink)
pezking4 Crazy Location: NC	I drive a maxima. Just borrowed the "36mm Jesus Nut" from a friend of mine, and got some help coming over later tonight. Time to go start pulling the drive axles.

07-27-2003, 01:47 PM	#8 (permalink)
Moonduck Junkie Location: SE USA	So how did it go?

07-27-2003, 02:32 PM	#9 (permalink)
pezking4 Crazy Location: NC	Still not finished. I need to borrow another jack or get another person to help because it's kinda hard by myself. Had to haul a bunch of the baby's stuff today and just got home, so I'm gonna try to go at least get something done.

07-27-2003, 02:50 PM	#10 (permalink)
Moonduck Junkie Location: SE USA	Last trans I dropped was from my Trooper II. Bloody thing had to come back 1", rotate clockwise 25 degrees, then drop the rear by 6", then back and down. There isn't a transmission jack on the planet that can handle those kind of contortions. As a 4x4 trans with transfer case, it weighed a bit too. I wound up cutting out the trans hump in the floorboard to run a rope from above. Then had a friend underneath with with me while my dad sat topside holding the rope and helping with angles. It frikken blew. Hope yours comes out easier.