Anyone else getting new toys for their car? - Page 2 - Tilted Forum Project Discussion Community

Willravel · 05-06-2007, 04:57 PM

Okay, I've compiled a new list for the recently purchased project car: 1995 Mitsubishi Eclipse GS-T

-Engine:
Greddy Turbo Upgrade
Greddy Hard Piping Kit
Greddy Intercooler
Greddy Profec Boost Controller
RC Engineering 550 cc Fuel Injectors
NGK Iridium IX Spark Plugs
Magnecor Race Wires

-Exterior:
APC Carbon Fiber Hood

-Interior:
Sparco Modena F Seats
Pioneer Deck
Escort Passport 8500 Radar Detector
Momo Millennium Steering Wheel
X-Force Steering Wheel Quick Release

This is in addition to the Apexi exhaust, Eibach springs, Tokico shocks, Greddy turbo timer, and HKS sequential blow off valve the car has already.

My only real choice now is the rims, which can make or brake the car. Right now, it has crappy looking rims. It looks like someone modeled the spokes after human teeth. Ugh. Here is a list of some rims I've found just farting around online:
Tenzo GF7 Rims in Hyper Black
Enkei EVO6 Rims
Kobe Kam 5 Rims
Motegi US7 Rims
(5/114.3)
They all look alright, no tacky chrome, they don't look like human teeth. I'm just looking for a rim that pops out at me. A while back I was looking at ADR rims called RS Limited something or other, but they don't seem to make those anymore.

Neewasy, there we are so far.

Death_alive · 05-08-2007, 07:01 AM

Man it's been awhile since I logged here

My updates on the delsol since last year =

Forged B18b1:
Enjo engine mounts
Wiseco 81.5mm low comp. pistons
Eagle H beam rods
Polished crank
balanced interns
Stock head (light polish only)
moroso oil pan
b18b tranny

Edelbrock victor X intake
Stock fuel rail
Stock FPR
575cc siemens deka 3102 injectors
255lph walbro fuel pompe

Turbonetics manifold
Garrett gt28rs Disco potato
profec B boost controller
Custom coach of america FMIC (29x2.75x10)
innovate lm-1 wideband
Autmotive EGT
p28 ECU with a moates ostrich (using crome)
custom downpipe 3"
exhaust ss line 3" (heat wrapped)

-----------

Vibrant sway bar
Koni yellow with eibach ground control
11" slotted disks (front)
integra type-R calipers
hawk pads
ss braided lines
Motegi ff7 gun metal rims
Falken ziex 512 tires

This my current project, and did it all myself, I didn't study in mecaniks, im a graphic designer nothing close to touching engines, only on my free time.
I did read for 1 year on how to do this upgrade, and I might add that I didnt have a clue on how i would do this.
Further more I had a d16z6 before, swapped everything in. I had an integra before, sold it and the guy wanted to trash the engine.
Bought it for 100$ CAD. The car is in running condition, but I need to tune it, might be able to do so this weekend.

www.pluc.net/projectB
delrsturbo.monchar.com (this one is in french)

Plus If anyone could help me with crome I would appreciate it.

herostar · 05-08-2007, 10:00 PM

I just bought and installed this on my 95 gsx. I also ordered some 780cc injectors to go along with it. The car has a 2.3L stroker motor with a 60-1 turbo.

05-06-2007, 04:57 PM	#41 (permalink)
Willravel ... a sort of licensed troubleshooter.	Okay, I've compiled a new list for the recently purchased project car: 1995 Mitsubishi Eclipse GS-T -Engine: Greddy Turbo Upgrade Greddy Hard Piping Kit Greddy Intercooler Greddy Profec Boost Controller RC Engineering 550 cc Fuel Injectors NGK Iridium IX Spark Plugs Magnecor Race Wires -Exterior: APC Carbon Fiber Hood -Interior: Sparco Modena F Seats Pioneer Deck Escort Passport 8500 Radar Detector Momo Millennium Steering Wheel X-Force Steering Wheel Quick Release This is in addition to the Apexi exhaust, Eibach springs, Tokico shocks, Greddy turbo timer, and HKS sequential blow off valve the car has already. My only real choice now is the rims, which can make or brake the car. Right now, it has crappy looking rims. It looks like someone modeled the spokes after human teeth. Ugh. Here is a list of some rims I've found just farting around online: Tenzo GF7 Rims in Hyper Black Enkei EVO6 Rims Kobe Kam 5 Rims Motegi US7 Rims (5/114.3) They all look alright, no tacky chrome, they don't look like human teeth. I'm just looking for a rim that pops out at me. A while back I was looking at ADR rims called RS Limited something or other, but they don't seem to make those anymore. Neewasy, there we are so far. Last edited by Willravel; 05-06-2007 at 09:56 PM..

05-08-2007, 10:00 PM	#43 (permalink)
herostar Psycho Location: South Dakota	I just bought and installed this on my 95 gsx. I also ordered some 780cc injectors to go along with it. The car has a 2.3L stroker motor with a 60-1 turbo. __________________ Got time to chill?

05-08-2007, 07:01 AM	#42 (permalink)
Death_alive Upright Location: octane city	Man it's been awhile since I logged here My updates on the delsol since last year = Forged B18b1: Enjo engine mounts Wiseco 81.5mm low comp. pistons Eagle H beam rods Polished crank balanced interns Stock head (light polish only) moroso oil pan b18b tranny Edelbrock victor X intake Stock fuel rail Stock FPR 575cc siemens deka 3102 injectors 255lph walbro fuel pompe Turbonetics manifold Garrett gt28rs Disco potato profec B boost controller Custom coach of america FMIC (29x2.75x10) innovate lm-1 wideband Autmotive EGT p28 ECU with a moates ostrich (using crome) custom downpipe 3" exhaust ss line 3" (heat wrapped) ----------- Vibrant sway bar Koni yellow with eibach ground control 11" slotted disks (front) integra type-R calipers hawk pads ss braided lines Motegi ff7 gun metal rims Falken ziex 512 tires This my current project, and did it all myself, I didn't study in mecaniks, im a graphic designer nothing close to touching engines, only on my free time. I did read for 1 year on how to do this upgrade, and I might add that I didnt have a clue on how i would do this. Further more I had a d16z6 before, swapped everything in. I had an integra before, sold it and the guy wanted to trash the engine. Bought it for 100$ CAD. The car is in running condition, but I need to tune it, might be able to do so this weekend. www.pluc.net/projectB delrsturbo.monchar.com (this one is in french) Plus If anyone could help me with crome I would appreciate it.