Tilted Forum Project Discussion Community  

Go Back   Tilted Forum Project Discussion Community > The Academy > Tilted Knowledge and How-To


 
 
LinkBack Thread Tools
Old 09-25-2009, 02:01 PM   #1 (permalink)
The Reverend Side Boob
 
Bear Cub's Avatar
 
Location: Nofe Curolina
Building a stripper pole

Has anyone here built a stripper pole for their house? I've got two designs thus far, one free standing with a heavily weighted platform base, and one that is friction anchored to the floor and secured to a ceiling stud.

I was wondering if anyone here has any experience in the matter with some pointers or handy design features that I may have missed.
__________________
Living in the United Socialist States of America.
Bear Cub is offline  
Old 09-25-2009, 02:25 PM   #2 (permalink)
Gastrolithuanian
 
Giant Hamburger's Avatar
 
Location: low-velocity Earth orbit
How much do you weigh?
I wouldn't want that thing falling down on you during your act.
Giant Hamburger is offline  
Old 09-25-2009, 02:27 PM   #3 (permalink)
WHEEEE! Whee! Whee! WHEEEE!
 
FuglyStick's Avatar
 
Location: Southern Illinois
It's never to early to plan for Xmas shopping
__________________
AZIZ! LIGHT!
FuglyStick is offline  
Old 09-25-2009, 02:36 PM   #4 (permalink)
The Reverend Side Boob
 
Bear Cub's Avatar
 
Location: Nofe Curolina
Quote:
Originally Posted by Giant Hamburger View Post
How much do you weigh?
I wouldn't want that thing falling down on you during your act.
About 190, but it would have to support about 300 pounds if I'm on it, because I would be spinning atop someone else.


Yes on the Christmas shopping. Merry Christmas to me.
__________________
Living in the United Socialist States of America.
Bear Cub is offline  
Old 09-26-2009, 06:13 PM   #5 (permalink)
Psycho
 
Location: somewhere out there
I would stay away from a weighted bottom... that, in my mind would make a big base that would still not really be very strong. I would go with anchoring both top and bottom... top to a stud and bottom either to a stud or concrete if you are on a slab.

I am sure many have done this before and some googling would help but what immediately comes to mind is something like a pipe flange on both ends to something secure... but those would need to be painted and/or polished to be made to look like anything other than a pipe going from the floor to the ceiling.
__________________
boom
kinsaj is offline  
Old 09-27-2009, 09:55 AM   #6 (permalink)
Tilted
 
Location: Canada
Believe it or not there are actually stripper pole kits. Google has tons of links.
Things to look for are the top plate and base plate sturdy.
Does the pole screw into both plates (sturdy but harder to remove).
How thick and flexible is the pole (the more flex the less confidence I'd have in the pole).
Never built one myself but I did mount a firepole in a house that spanned from top floor to basement.
I did learn one thing Brass is the way to go, stainless is too slick almost broke my ankles testing even with a nice thick cushion.
Flinx is offline  
Old 09-30-2009, 12:36 PM   #7 (permalink)
Upright
 
StephanieH's Avatar
 
Location: St Johns, Mi
so did you get one? A kit or just made one?

I want one in my basement. I'm taking pole dancing lessons that start soon, and I know I'll (and the hubby) will want one for "homework"
StephanieH is offline  
Old 09-30-2009, 02:40 PM   #8 (permalink)
zomgomgomgomgomgomg
 
telekinetic's Avatar
 
Location: Fauxenix, Azerona
You should invest in a good swivel pole...way better than the stationary ones. A pair of thrust bearings top and bottom ought to do the trick.
__________________
twisted no more
telekinetic is offline  
Old 10-03-2009, 03:02 PM   #9 (permalink)
Upright
 
Location: NoVa
Quote:
Originally Posted by twistedmosaic View Post
You should invest in a good swivel pole...way better than the stationary ones. A pair of thrust bearings top and bottom ought to do the trick.
The above is probably right on. For short and longterm structural stability you want to test a little. You need to check what is in the ceiling that will bear the torsional force exterted against the pole. It isn't just a matter on weight on the floor. If you have a attic above with joists or trusses, they were not built to hold much laterally. If that is the case you likely will need to cross-brace immediately above where your attachment point is. To this you need to put some stringers from there attached across to load bearing walls. I little lady 110 lbs moving at some speed could be putting 500+ lbs lateral force momentarily on it. I realize this isn't a tackling dummy but centrifugal force can surprise you.
IF you have a second floor above you still need to find where and what you are attaching to. The last thing you want to do is find out a contractor did a quick job of screws or nails.
It would also be bad to run a mounting lag screw in to an electrical line in the ceiling. We retrofitted an old building for our use in the Czech Rep. 2 years ago. To overcome a problem with running the electricity over a plaster ceiling an ingenoius electrician had bored a hole the long ways about 9 inches over to a box (60 years ago). It was sturdy enough for us to hang a ceiling fan from so we went with an exterior mount. One screw just barely nicked the old line we couldnt see. It all worked fine until someone touched the metal when changing fan direction switch and realized the fan case had voltage on it.
Not as likely here in the US but it pays to investigate unseen areas.

This would be a nasty surprise on a pole huh?
Kingruv is offline  
Old 10-23-2009, 09:29 PM   #10 (permalink)
Addict
 
Location: Wherever I am!
My wife teaches pole dancing for fitness. I have installed and setup various poles. The stage poles, with a base, the friction poles, with a mount in the ceiling, work well, as well as permenant mounted poles. The only draw back to the stage pole is that you lose the 1-2' that goes into the stage. Stay away from the spinning poles, until you get good, unless you really do not want to learn how to do it right.

In my opinion you need to order a good pole. If you want it to be removable, then order from a legitmate site like 'lil mynx or platinum stages, there are others. These use a spring to hold it into the ceiling and against the floor. I weigh over 200 #'s and they can take me spinning around it. If you want it to remain permanent in the building a decent pole with a couple of floor flanges, screwed into a ceiling joist and the floor will work well.

My wife popped in a said that if, you want to get serious with it, order a pole that does everything (i.e. spins) but locks so you can learn how do it without the spinning. Then after you get good at the inverts, unlock it and allows you to spin. Be aware that the spinning poles take quite awhile to get used to, as you need to learn how to control the spin.
__________________
If ignorance is bliss, then wipe this smile off my face!
Hard8s is offline  
Old 10-23-2009, 09:39 PM   #11 (permalink)
Human
 
SecretMethod70's Avatar
 
Administrator
Location: Chicago
Just make sure this doesn't happen!

__________________
Le temps détruit tout

"Musicians are the carriers and communicators of spirit in the most immediate sense." - Kurt Elling
SecretMethod70 is offline  
Old 10-29-2009, 10:15 PM   #12 (permalink)
Addict
 
RangerJoe's Avatar
 
I was thinking more like this, smeth:

RangerJoe is offline  
Old 10-26-2010, 01:09 PM   #13 (permalink)
Upright
 
Quote:
Originally Posted by Kingruv View Post
The above is probably right on. For short and longterm structural stability you want to test a little. You need to check what is in the ceiling that will bear the torsional force exterted against the pole. It isn't just a matter on weight on the floor. If you have a attic above with joists or trusses, they were not built to hold much laterally. If that is the case you likely will need to cross-brace immediately above where your attachment point is. To this you need to put some stringers from there attached across to load bearing walls. I little lady 110 lbs moving at some speed could be putting 500+ lbs lateral force momentarily on it. I realize this isn't a tackling dummy but centrifugal force can surprise you.
IF you have a second floor above you still need to find where and what you are attaching to. The last thing you want to do is find out a contractor did a quick job of screws or nails.
It would also be bad to run a mounting lag screw in to an electrical line in the ceiling. We retrofitted an old building for our use in the Czech Rep. 2 years ago. To overcome a problem with running the electricity over a plaster ceiling an ingenoius electrician had bored a hole the long ways about 9 inches over to a box (60 years ago). It was sturdy enough for us to hang a ceiling fan from so we went with an exterior mount. One screw just barely nicked the old line we couldnt see. It all worked fine until someone touched the metal when changing fan direction switch and realized the fan case had voltage on it.
Not as likely here in the US but it pays to investigate unseen areas.

This would be a nasty surprise on a pole huh?
Oh wow, looks like the ceiling fan ruined it. I understand what your saying though, very useful facts and tips. Cheers
__________________
Ceiling Fans

Last edited by ecenur; 10-28-2010 at 07:50 AM..
ecenur is offline  
 

Tags
building, pole, stripper

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 04:41 PM.

Tilted Forum Project

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360