|
Well got my engine kit ordered....I ordered everything I stated....I think I found my Camshaft I want...it's probably gonna be an Crane Powermax cam...here are the specs
VALVE SETTING: INTAKE .000 EXHAUST .000 ----> HOT
LIFT: INTAKE @CAM 3027 @VALVE 484 ROCKER ARM RATIO
EXHAUST @CAM 3200 @VALVE 512 1.6
ALL LIFTS ARE BASED ON ZERO LASH AND THEORETICAL ROCKER ARM RATIOS
CAM TIMING OPENS CLOSES ADV DURATION
@ .004 INTAKE 25 BTDC 67 ABDC 272 °
TAPPET LIFT EXHAUST 75 BBDC 29 ATDC 284 °
SPRING REQUIREMENTS
TRIPLE DUAL OUTER INNER
PART NUMBER 99833
LOADS:
CLOSED 95 LBS @ 1.703 OR 1 45/64
OPEN 268 LBS @ 1.223
RECOMMENDED RPM
RANGE WITH MATCHING COMPONENTS
MINIMUM RPM 2000
MAXIMUM RPM 5000
VALVE FLOAT 6500
CAM TIMING OPENS CLOSES MAX LIFT DURATION
@ .050 INTAKE 1 BTDC 35 ABDC 107 °ATDC 216 °
TAPPET LIFT EXHAUST 51 BBDC (3) BTDC 117 °BTDC 228 °
REMARKS:
FIRING ORDER: 1-3-7-2-6-5-4-8
I'm hoping for about 340hp and 360 ftlb's or torque
|