Quote:
|
Originally Posted by vanblah
Are you positive that your ducts are connected? You don't want to have to go past the heat strips (if you have electric).
Is it possible to go under the house and through the baseboard? Or through the attic and behind the crown molding (if you have any)? I've done it this way many times. Just be careful taking the molding down and you should be fine (no major structural damage). In fact, an ethernet port is a good thing in a modern house.
 |
Not a bad idea although I have not had any problems with useing heat ducts in the past. One note is that you should be careful with any bends or twists the wires make. Most Cat5 is somewhat thin wire inside and could break if you are not nice to it.
__________________
All truth passes through three stages:
First it is ridiculed
Second, it is violently opposed and
Third, it is accepted as self-evident.
ARTHUR SCHOPENHAUER (1788-1860)
|