Tilted Forum Project Discussion Community

Tilted Forum Project Discussion Community (https://thetfp.com/tfp/)
-   Tilted Knowledge and How-To (https://thetfp.com/tfp/tilted-knowledge-how/)
-   -   clean the treadmill (https://thetfp.com/tfp/tilted-knowledge-how/78762-clean-treadmill.html)

bill96ab 12-15-2004 05:35 PM

clean the treadmill
 
Anyone here have their own treadmill that needs cleaning? Mine stinks very badly, and I really dont know much about how to get the smell out. it is in the motor, and on the mat itself. I know it is from all the hours of me sweating on it, and not really every cleaning it up.

Any suggestions?


thanks

shadowalker 12-15-2004 07:58 PM

Spray the whole thing down with lysol, well all the parts you make contact with. Mat, hand grips, etc. Let it dry and see if it still stinks, if so, repeat.

This may sound crazy to do but you could also if it has a deck that folds up. Put it in a bike bag like you can get around the christmas season, spray the bag with the lysol and seal it for a day or so and let the spray kill any fungus that is living in the nooks and such.

godxzilla 12-16-2004 05:45 AM

I would see if you could remove the belt and clean underneath it. im sure the smell is building up down there. if you cant remove it, lift it and use lysol generously. I would probably stay off it until all the lysol has evaporated from underneath, but im sure that will solve 90% of your problem.

bill96ab 12-16-2004 07:13 PM

I think i will try both of the suggestions... thanks!

DJMala 12-16-2004 10:29 PM

I'd be careful cleaning under the belt. I think most tradmills have a lubricant under there. After cleaning, you may want to re-lube it before you put the belt back on and use it.

godxzilla 12-17-2004 11:04 PM

good call on the under the belt thing. they do have a lubricant under there that you would want to replace/refresh when done.

Mobo123 12-18-2004 08:18 PM

use a silcon spray on the mechanisms that spin. That should unstick things.

Adog 12-23-2004 09:19 AM

I have a cleaner kit for mine. Its like a wand that you spray down with a cleaner/lubricant, then you place the wand under the track and turn the treadmill on... Its very easy and works well. I got the kit at sears....

bill96ab 12-23-2004 04:59 PM

Adog, How much did that claner wand cost? and will it work with nordatrack?

Bill

Adog 01-05-2005 08:05 PM

was only like 15 dollars and I dont see why it wouldnt work with a nordatrack.
you can find em here...
http://www.jadfitness.com/


All times are GMT -8. The time now is 06:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
© 2002-2012 Tilted Forum Project


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360