overclocked 2500+ running at 3200+ speed - Tilted Forum Project Discussion Community

yonex73 · 06-05-2004, 03:16 PM

I have my 2500+ running at 2.2 gig which is the speed for a 3200+ am I crazy.. it is running fine.. the mobo is the ECS KT600-A

Dilbert1234567 · 06-05-2004, 03:31 PM

should be fine

nanofever · 06-05-2004, 03:48 PM

That is a pretty common mod, if you have the cpu temp post it. You can also run "Prime 95" to see if the overclock is stable.

yakimushi · 06-05-2004, 08:29 PM

Welcome to the club!

I've got my XP2100 (1.7GHz non-Barton) running at 2.26GHz.

My temps are a little high right now (about 140F) but I'm still sorting out some cooling issues. I'm trying to shoehorn some 120mm fans into my case but thats going to require quite a bit of cutting and replacing metal. Bleh. It doesn't help my case is 1mm steel.

What kind of RAM are you running, and at what speed? I'm using OCZ PC3200 Basic, 195FSB x 11.5 multiplier.

Wyodiver33 · 06-06-2004, 03:16 PM

I have a pretty good overclock as well, but a new Athlon 64 purchase is near.

aarchaon · 06-07-2004, 06:48 PM

I have my 2500+ overclocked to 3200+ (running at 2.21 GHz).
Temps are usually around 55 - 60c, voltage is set to 1.85v, but it runs at 1.88 for some reason.
I am using the Thermaltake Silent Boost heatsink.
It seems pretty stable, i think the problems i am experiencing are more to do with flaws in XP rather than a hardware problem (ntdll.dll causes explorer to restart every so often).

06-05-2004, 03:16 PM	#1 (permalink)
yonex73 Upright Location: harrisburg, PA	overclocked 2500+ running at 3200+ speed I have my 2500+ running at 2.2 gig which is the speed for a 3200+ am I crazy.. it is running fine.. the mobo is the ECS KT600-A __________________ a blindman has the best nightmares

06-05-2004, 03:31 PM	#2 (permalink)
Dilbert1234567 Devils Cabana Boy Location: Central Coast CA	should be fine __________________ Donate Blood! "Love is not finding the perfect person, but learning to see an imperfect person perfectly." -Sam Keen

06-05-2004, 03:48 PM	#3 (permalink)
nanofever Huzzah for Welcome Week, Much beer shall I imbibe. Location: UCSB	That is a pretty common mod, if you have the cpu temp post it. You can also run "Prime 95" to see if the overclock is stable. __________________ I'm leaving for the University of California: Santa Barbara in 5 hours, give me your best college advice - things I need, good ideas, bad ideas, nooky, ect. Originally Posted by Norseman on another forum: "Yeah, the problem with the world is the stupid people are all cocksure of themselves and the intellectuals are full of doubt."

06-06-2004, 03:16 PM	#5 (permalink)
Wyodiver33 Just here for the beer. Location: Ft. Lauderdale, Floriduh	I have a pretty good overclock as well, but a new Athlon 64 purchase is near. __________________ I like stuff.

06-07-2004, 06:48 PM	#6 (permalink)
aarchaon Insane	I have my 2500+ overclocked to 3200+ (running at 2.21 GHz). Temps are usually around 55 - 60c, voltage is set to 1.85v, but it runs at 1.88 for some reason. I am using the Thermaltake Silent Boost heatsink. It seems pretty stable, i think the problems i am experiencing are more to do with flaws in XP rather than a hardware problem (ntdll.dll causes explorer to restart every so often). __________________ Green. Yellow. Blue.

06-05-2004, 08:29 PM	#4 (permalink)
yakimushi Addict	Welcome to the club! I've got my XP2100 (1.7GHz non-Barton) running at 2.26GHz. My temps are a little high right now (about 140F) but I'm still sorting out some cooling issues. I'm trying to shoehorn some 120mm fans into my case but thats going to require quite a bit of cutting and replacing metal. Bleh. It doesn't help my case is 1mm steel. What kind of RAM are you running, and at what speed? I'm using OCZ PC3200 Basic, 195FSB x 11.5 multiplier.